Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Check that you are pointing the remote control at the remote control sensor in the right of the indoor unit. Replace the remote control batteries if necessary. Check that the correct operating mode has been selected (AUTO, COOL, HEAT). The room temperature may be too low or too high. Dust may be blocking the air filter guard; refer to page 22 for cleaning instructions. Check that there is no obstacle in front of the outdoor unit. Check that the required temperature has been set correctly. Increase the fan speed. If the air flow is directed downwards, use the remote control to direct it upwards. Check that the operating mode is set to COOL, HEAT or FAN ; in the AUTO mode, the fan speed changes automatically and in the DRY mode, it is set to AUTO. Check that the air conditioner has been switched on; if necessary, press the (On/Off) button on the remote control. Check that the timer has been programmed correctly; see pages 18 and 19. Air the room. Problem The air conditioner does not operate at all The air conditioner does not operate with the remote control No beep is heard when you press the (On/Off) on the remote control The air conditioner does not cool or heat When heating, the required room temperature is never reached and the air conditioner frequently stops The fan speed does not change when you press the FAN button The air flow direction does not change when you press the SWING button The timer is not correctly triggered Odours are permeated in the room during air conditioning Before contacting the after-sales service, perform the following simple checks. They may save you the time and expense of an unnecessary call. ENGLISH ENGLISH E-24 Installing a Filter (Option) Technical Specifications Deodorizing filter Bio-Pure Filter The air conditioner can be fitted with a deodorizing and Bio-Pure filter to remove minute dust particles or odours. The service life of the filter is approximately three months depending on the time during which the air conditioner is used. 1 Remove the vinyl packing from the filter. N NNNNo oooot tttte eeeeDo not remove the packing from a deodorizing filter until you wish to use the filter, as it will lose its properties. 2 Insert the filter in the filter holder and press the three insert tabs until you hear a click. 3 Open the front grille by pulling on the tabs on the lower right and left sides of the indoor unit. 4 Take out the existing filter and replace it with the new one. Model Indoor unit Power Supply .....E/EA 220-240V~, 50Hz SH.... AQ...B 220V~, 60Hz .....C 208-230V~, 60Hz .....D 200-220V~, 50Hz . The last letter of the Model Indoor unit means the power supply, "E" in the "AQ07A1ME", for instance. E-25 Technical Specifications ENGLISH Package Weight Model AQ12A3(A4)(A7)(A8)MB/C/D/E/EA SH12ZA3(A4)(A7)(A8) SH12ZA3(A4)(A7)(A8)A SH12ZA3(A4)(A7)(A8)B AQ09A3(A4)(A7)(A8)MB/C/D/E SH09ZA3(A4)(A7)(A8) SH09ZA3(A4)(A7)(A8)A AQ07A3(A4)(A7)(A8)MB/C/D/E SH07ZA3(A4)(A7)(A8) SH07ZA3(A4)(A7)(A8)A 2.35kg Paper AQ12...
Dieses Handbuch ist für folgende Modelle:Splitgeräte - AQ07A1ME (1.31 mb)
Splitgeräte - AQ07A2ME (1.31 mb)
Splitgeräte - AQ07A3ME (1.31 mb)
Splitgeräte - AQ07A4ME (1.31 mb)