Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Carrier Dateigröße: 5.16 mb Dateiname: 951efc58-cf42-40d8-9063-5a4a9b7d819b.pdf Unterrichtssprache:

Fresh Air Ventilation is usually kept in the closed position. Use only when clearing smoke and/or odors from the room. Pull to open. p g Fig. 15 Mechanical control model Thermostat knob Mode knob Fig. 16 Fresh Air Vent Lever F H R FAN SPEED MODEOFFON/ TIMER Airconditioner WAIT THREE MINUTES BEFORE RESTARTING LOW FAN MED FAN HIGH FAN OFF HIGH COOL MED COOL LOW COOL 1 3 5 7 9 CO LER O 1 3 13 OPERATING INSTRUCTIONS .MECHANICAL CONTROL MODEL WAC 8-24 USER MAN FINAL 3/2/05 12:13 PM Page 15 Mode button Each time Mode button is pressed, the operation mode is changed in sequence: COOLING FAN ONLY ENERGY SAVING COOLING Button The air conditioner will be started when it is energized or will be stopped when it is in operation, if you press this button. Control Panel You can easily operate this air conditioner by pressing relevant button on the control panel as well as the remote control. Indication symbols of LED on control panel : High fan speed Medium fan speed Low fan speed Auto fan speed Cooling Fan only Display set temp Display set timer Timer LED on control panel lights on when the relevant mode is in used. Energy-saving NOTE: After setting the mode, allow 3 minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0 (32 ) to 38 (99 ). Room Temperature below 32 ,the Temperature display L0. Room Temperature above 99 ,the Temperature display H1. NOTE: Temperature setting range is from 19 (66 ) to 31 (88 ). Fan Speed button Used to select fan speed in sequence auto, low, medium and high. Timer button Used to set or cancel timer operation. When the unit is in operation, you can set OFF TIMER.When the unit is off, you can set ON TIMER.Timer setting range is 0 to 24 hours. If the OFF TIMER is set, the timer LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be cancelled. ON TIMER is set, the timer LED displays the remaining time to turn on the unit. If you want to cancel ON TIMER, press TIMER button. Used to set room temperature in COOLING mode or used to set time in TIMER mode. two keys are pressed at the same time,the temperature LED display will alternate between and . Button Electronic Control Panel Model Heating Fan Speed Mode Timer Airconditioner 14 OPERATING INSTRUCTIONS .ELECTRONIC CONTROL PANEL MODEL NOTE: After setting the mode, allow three (3) minutes before switching to another mode. In the FAN ONLY Mode, Room Temperature display range is from 0°C (32°F) to 38°C (99°F). Room Temperature below 32°F, the Temperature display L0. Room Temperature above 99°F, the Temperature display H1. If the OFF TIMER is set, the time LED displays the remaining time to turn off the unit for only 12 seconds, then LED shifts to display set temperature. If you press TIMER button within the 12 seconds, OFF TIMER will be cancelled. If the ON TIMER is set, the timer LED displays the remaining time ...

Herunterladen

Geben Sie zwei Ziffern: