Stimmen - 2, Durchschnittliche Bewertung: 3 ( )

Hersteller: Carrier Dateigröße: 260.31 kb Dateiname: Unterrichtssprache:

GENERAL INFORMATION ......................................................................................................11 • CHANGING AIR FLOW DIRECTION • AIR FLOW AROUND UNIT • DRAIN HOLE AND WATER DRIPPING OUTSIDE 6. CARE AND MAINTENANCE ....................................................................................................12 • AIR FILTER • CLEANING THE AIR CONDITIONER 7. ELECTRICAL REQUIREMENTS ...............................................................................................13 • ELECTRICAL GROUNDING INSTRUCTIONS. • USE OF EXTENSION CORDS 8. BEFORE CALLING FOR SERVICE............................................................................................14 GENERAL SPECIFICATIONS ITEM DWC-100C/DWC-100CS DWC-121C/DWC-121CS DWA-122C/DWA-122CS DWA-150C/DWA-150CS DWA-151C/DWA-151CS POWER SOURCE AC 115V, 60Hz, SINGLE PHASE AC 208~230V, 60Hz, SINGLE PHASE DIMENSIONS 23.6(W) x 14.9(H) x 21.0(D) inch 600(W) x 380(H) x 535(D) mm WEIGHT (NET) 85.6 Ibs (38.8 Kg)-Approx. 85.6 Ibs (38.8 Kg)-Approx. 92.6 Ibs (42 Kg)-Approx. 2 INSTALLATION INSTRUCTIONS • WINDOW REQUIREMENTS These instructions are provided for a standard double hung window or mobile home double hung window installation in windows 27.5 inch (699mm) to 36 in (914mm). The upper and lower sash must open sufficiently to allow a clear vertical opening of 15 in (381mm) from the bottom of the sash to the window sill. Select a centrally located window on the side of the room that receives the least direct sunlight. There should be no obstruction to air flow either inside(i.e curtains) or outside (i.e fence, wall or bushes). Read this entire installation manual thoroughly before beginning the installation. 27.5" To 36" 15" MIN Make sure you have the necessary tools and other materials for the job. Study the illustrations in these instructions to become familiar with important details of the installation process. Read the Use & Care manual to become familiar with the operation of your room air conditioner. IMPORTANT : It is important, both for your personal safety and to avoid possible damage to your home, that you observe the safety instructions that are given. After installing the unit, re-read these instructions to make sure you have completed each step and all parts are fastened in place for a secure installation. For best results, perform the installation procedure in the order given. Doing so will minimize the time required to install the unit. • BASIC TOOLS NEEDED • Standard screwdriver • Phillips screwdriver • Sharp knife • Carpenter’s level • 1/4” hex driver • Tape measure • Electric drill • 1/8” drill bit • SAFETY INSTRUCTIONS CAUTION • The air conditioner shall be installed in accordance with the national wiring regulation. 1. Install an exclusive main power switch (main circuit breaker) or GFI (Ground Fault Interrupted) switch. 2. Be sure to use grounded power source. 3. Power source for DWC-100C, D...

Herunterladen

Geben Sie zwei Ziffern: