78-3610-09 Cisco IOS Release 11.0 BT Release Note and Update to Configuration Guides and Command References January 15, 1999 This document supplements the Cisco IOS Release 11.0 documentation set with new and changed commands that support Cisco IOS Release 11.0(10)BT and later. Note that Cisco IOS Release 11.0(10)BT is the initial release of Cisco IOS Release 11.0 BT. No prior versions of Cisco IOS Release 11.0 BT exist. The TN3270 server function is supported on a Channel Interface Processor ca

The default is 389, as stated in the LDAP specification. If you do not know the port number, you can find this information by viewing those properties on the LDAP server. If you want to use secure authentication, port 636 is usually used. c. To specify that Cisco Secure ACS should use LDAP version 3 to communicate with your LDAP database, select the LDAP Version check box. If the LDAP Version check box is not selected, Cisco Secure ACS uses LDAP version 2. d. The username and password credential

Examples of Language Preferences The following examples shows how language preferences affect the outcome of system, meeting, and user-level preference selections: Three-Language System With Unconfigured Port Using the Default Language Example The welcome greeting plays, and the caller is offered the following selections: • “Welcome to MeetingPlace” in U.S. English • “To select English, press 1” in U.S. English • “To select Japanese, press 2” in Japanese • “To select French, press 3” in Canadian

This document provides procedures for localizing Cisco Unified MeetingPlace Audio Server Release 5.4 and Release 6.0 and includes the following sections: • Naming Conventions, page 1 • Information About Localizing Cisco Unified MeetingPlace Audio Server Release 5.4 and Release 6.0, page 2 • How to Localize Cisco Unified MeetingPlace Audio Server Release 5.4 and Release 6.0, page 5 • Cisco Unified MeetingPlace Documentation, page 7 • Obtaining Documentation, Obtaining Support, and Security Guidel

ALL STATEMENTS, INFORMATION, AND RECOMMENDATIONS IN THIS MANUAL ARE BELIEVED TO BE ACCURATE BUT ARE PRESENTED WITHOUT WARRANTY OF ANY KIND, EXPRESS OR IMPLIED. USERS MUST TAKE FULL RESPONSIBILITY FOR THEIR APPLICATION OF ANY PRODUCTS. THE SOFTWARE LICENSE AND LIMITED WARRANTY FOR THE ACCOMPANYING PRODUCT ARE SET FORTH IN THE INFORMATION PACKET THAT SHIPPED WITH THE PRODUCT AND ARE INCORPORATED HEREIN BY THIS REFERENCE. IF YOU ARE UNABLE TO LOCATE THE SOFTWARE LICENSE OR LIMITED WARRANTY, CONTACT

Some LAN and WAN ports both use RJ-45 connectors. Use caution when connecting cables. Statement 1021 Warning This product relies on the building’s installation for short-circuit (overcurrent) protection. Ensure that a fuse or circuit breaker no larger than 120 VAC, 15A U.S. (240 VAC, 10A international) is used on the phase conductors (all current-carrying conductors). Statement 13 2-2 Cisco IP/TV 3400 Series Servers User Guide OL-4467-01 Chapter 2 Preparing to Install the IP/TV Server Safety War

For example, this can occur when many regional Info Servers send events to a central Info Server through unidirectional gateways and many desktops connect directly to the central Info Server. When an Info Server becomes overloaded, unidirectional gateways cannot insert all events into the Info Server database. Additionally, desktops connected directly to the Info Server further increase the load, especially if a large number of desktops connect simultaneously. The Desktop Info Server architectur

In addition to protecting traffic at the client layer, the dual-home configuration protects the ONS 15200 system against single MCU or SCU failures. Figure 2-3 illustrates the ONS 15200 dual-home configuration. Note The physical connection in Figure 2-3 consists of two fiber-optic cables. Figure 2-3 Dual-home configuration CLIENT CLIENT CLIENT ONS 15252 ONS 15252 ONS 15201 ONS 15201 ONS 15201 ONS 15201(TWO) ONS 15201 ONS 15201 ONS 15201 ONS 15201 LEGEND ONS - Optical network system PHYSICAL CONN