Stimmen - 3, Durchschnittliche Bewertung: 4
(
)
)
|
Fotos und technische Daten Furuno CH-250 |
Anleitung Zusammenfassung
The default setting is OFF. AUDIO LEVEL: Adjusts the audio level of the external loudspeaker (option). 5.2 COM2 Menu 5.2.1 Displaying the COM2 menu 1. Press the [MENU] key to open the menu. 2. Press ^ to choose MENU, and then press < or > to choose COM2. DELETING TRACK NO WHITE MARKER OFF SIG LEVEL OFF COLOR 16 BKGD COLOR 2 : SELECT : CHANGE MENU: END MENU COM1 HORZ VERT ES PRESET SYS COM2 COM2 menu 5.2.2 COM2 menu description DELETING TRACK: Choose ON to delete all ship’s track (from horizontal and horizontal/video plotter displays). WHITE MARKER: Displays desired echo in white. It is useful for discriminating bottom fish from the bottom echo. The setting range for the 8-color display is OFF, 1-7, and for the 16-color display, OFF, 1-15. SIG LEVEL: Refer to page 2-17. COLOR: Chooses 8-or 16-color display. BKGD COLOR: Chooses color of background, text and menu. Three choices are available and these are shown in the table below. BKGD COLOR Background Text Menu 1 Black Gray Dark-blue 2 Dark-blue White Medium blue 3 White Black Gray 5.3 Short-cut Menu, Preset Menu These menus program the CUSTOM MODE keys [1], [2] and [3], and one of the menus appears according to the setting of CUSTOM KEY on the SYSTEM SETTING 1 menu. Short-cut key: One-touch activation of corresponding dialog box. This is the default setting. Preset key: One-touch setup of mode, sector, train, range, tilt and speed controls. Below are the default settings for PRESET. CUSTOM MODE key Display Mode Sector Train Range (m)* Tilt Speed Key 1 Expanded Horizontal 240° 0° 250 30° Fast Key 2 Horizontal 360° 0° 250 30° Fast Key 3 Vertical Fan 180° 90° 120 90° Fast * - Default range for 60 kHz transducer. Default range changes with transducer. 5.3.1 Selecting short-cut or preset 1. Press the [MENU] key to open the menu. 2. Press to select MENU, and then press to select SYS. COM1 COM2 HORZ VERT ES PRESET NO YESGO TO SYS MENU MENU SYS : SELECT : CHANGE MENU: END Figure 5-2 Display for opening system menu 3. Press to select GO TO SYS MENU. 4. Press to select YES. RANGE-SONAR MODE RANGE-VERTICAL MODE RANGE-E/S MODE ADJ MOTION SENSOR TX FREQ ADJUST TEST TEST PATTERN DEMO MODE DEFAULT SYSTEM SETTING: COLOR PALETTE LANGUAGE SYSTEM BACKUP LOAD BACKUP DATA HEADING OFFSET, DRAFT OFFSET ** SYSTEM MENU ** RANGE-TRACK MODE : SELECT : MENU DISPLAY MENU: END Figure 5-3 System menu 5. Press to open the SYSTEM SETTING menu. OFF 10sec 30sec 1min 3min 6min TARGET L/L : OFF ON CUSTOM KEY : PRESET KEY SHORT-CUT KEY OFF NORMAL RED ETA MARK : EMPHASIS MODE : m ft fa HIRO P/B UNIT : OFF FLOW FROM FLOW TO SHIP'S L/L SHIP'S LOP CURSOR L/LPOSITION : CURRENT DATA : HEADING INDICATION : TRUE AZ : SELECT : CHANGE MENU: END MENU 1 2 NORTH MARK : OFF ON CSE DATA : NAV GYRO NAV DATA : GPS LoranC LoranA DR DECCA OTHERS TVG CORRECTION : OFF 1/2 1/1 ** SYSTEM SETTING 1 ** TEMP : °C °F TRACK : OFF ON Figure 5-4 System setting 1 menu 6. Press or to select CUSTOM KEY. 7. Press or to select PRESET KEY or SHORT-CUT KEY as desired. 8. Press the [MENU] key twice to register your selection and close the menu. 5.3.2 Preset key 1. Select PRESET KEY following the procedure in paragraph 5.2.1 on page 5-3. 2. Press the [MENU] key to open the menu. 3. Press to select MENU, and then press or to select PRESET. MODE SECTOR TRAIN RANGE TILT SPEED PRESENT CUSTOM1 CUSTOM2CUSTOM3 FUNCTION KEY: ENTRY MENU: END ADJUST THE KNOBS AND FUNCTION KEYS TO THE DESIRED SETTING, THEN PRESS A CUSTOM MODE KEY TO SAVE THE SETTING. 240° 360° 180° 360° 160 160 120 160 FAST FAST FAST NORM 30° 30° 90° 30° 0° 0° 90° 0° MENU COM1 HORZ VERT ES PRESET SYSCOM2 Figure 5-5 PRESET menu 4. Set the [MODE], [SECTOR], [TRAIN], [RANGE], [TILT] and [FAST SCAN] controls according to target fish or fishing area. 5. Press the CUSTOM MODE keys [1], [2] or [3] to program. You are asked if you want to save the settings to the custom key pressed. (In the example, the custom key [1] was pressed.) SAVE THE SETTING TO CUSTOM1 KEY? NO YES : CHANGE MENU: END 6. Press to select YES. 7. Press the [MENU] key. The message “PRGM SET” appears at the screen top. 8. Press the [MENU] key to finish. Activating custom mode 1. Press appropriate CUSTOM MODE key. The indication CUSTOM1, CUSTOM2 or CUSTOM3 appears at the top of the screen depending on key pressed. 2. To escape from the custom mode operation, operate any of the controls among [MODE], [SECTOR], [TRAIN], [RANGE], [TILT] and [FAST SCAN]. 5.3.3 Short-cut key The default settings are key [1], interference rejector; key [2], signal level, and key [3], background color. The operator may change their functions as desired. Note: In the combination modes the short-cut key operation is only possible from the main window. 1. Select SHORT-CUT following the procedure in paragraph 5.2.1 on page 5-3. 2. Press the [MENU] key to open the menu. 3. Press to select MENU, and then press or to select SHORT-CUT. MENU COM1 COM2 HORZ VERT ES SHORT-CUT SYS KEY 3 KEY 2 KEY 1 VER SEARCH VOLUME DEL TRACK AUTO TILT BKGD SIG LEVEL CLU...