Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
2. Select Devices . ATA Drive Setup. 3. Select Configure SATA as and press Enter. 4. Select RAID Mode and press Enter. 32 ThinkServer TS140 User Guide 5. Press F10 to save changes and exit the Setup Utility program. Creating RAID volumes This section describes how to use the Intel Rapid Storage Technology enterprise option ROM configuration utility to create RAID volumes. To create RAID volumes, do the following: 1. Press Ctrl+I when prompted to enter the Intel Rapid Storage Technology enterprise option ROM configuration utility during system startup. 2. Use the up and down arrow keys to select Create RAID Volume and press Enter. 3. Type a proper RAID volume name in the Name field and press Tab. 4. Use the arrow keys to select a RAID level in the RAID Level field and press Tab. 5. If appropriate, use the arrow keys to select a stripe size in the Stripe Size field and press Tab. 6. Type a volume size in the Capacity field and press Tab. 7. Press Enter to initiate volume creation. 8. When prompted, press Y to accept the warning message and create the volume. 9. If desired, return to step 2 to create additional RAID volumes. 10. When finished, select Exit and press Enter. Deleting RAID volumes This section describes how to use the Intel Rapid Storage Technology enterprise option ROM configuration utility to delete RAID volumes. To delete RAID volumes, do the following: 1. Press Ctrl+I when prompted to enter the Intel Rapid Storage Technology enterprise option ROM configuration utility during system startup. 2. Use the up and down arrow keys to select Delete RAID Volume and press Enter. 3. Use the arrow keys to select the RAID volume to be deleted and press Delete. 4. When prompted, press Y to confirm the deletion of the selected RAID volume. Deleting a RAID volume will reset the hard disk drives to non-RAID. 5. After deleting a RAID volume, you can: • Return to step 2 to delete additional RAID volumes. • See “Creating RAID volumes” on page 33 for RAID volume creation. • Use the up and down arrow keys to select Exit and press Enter. Resetting disks to non-RAID This section describes how to reset your hard disk drives to non-RAID. To reset your hard disk drives to non-RAID, do the following: 1. Press Ctrl+I when prompted to enter the Intel Rapid Storage Technology enterprise option ROM configuration utility during system startup. 2. Use the up and down arrow keys to select Reset Disks to Non-RAID and press Enter. 3. Use the arrow keys and the space key to mark individual physical hard disk drives to be reset, and then press Enter to complete the selection. 4. When prompted, press Y to confirm the reset action. 5. After resetting the hard disk drives to non-RAID, you can: Chapter 5. Configuring the server 33 • See “Deleting RAID volumes” on page 33 for RAID volume deletion. • See “Creating RAID volumes” on page 33 for RAID volume creation. • Use the up and down arrow keys to select Exit and press Enter. Updating the firmware The firmware in the server is periodically updated and the latest firmware is always available for downloading from the Lenovo Web site. Go to and follow the instructions on the Web page to check for the latest level of firmware, such as the BIOS updates and device drivers. When you replace a device in the server, you might have to either update the server with the latest version of the firmware that is stored in memory on the device or restore the preexisting firmware from a diskette or CD image. Notes: • The BIOS ROM file is stored in flash on the system board. • The onboard SATA software RAID firmware is integrated into the BIOS ROM on the system board. Using the Firmware Updater program The Firmware Updater program enables you to maintain your system firmware up-to-date and helps you avoid unnecessary outages. To update your system firmware using the Firmware Updater program, do the following: Note: Before distributing the firmware updates to a server, ensure that your server can restart successfully without encountering hardware problems. 1. Go to and follow the instructions on the Web page to locate the Firmware Updater program. 2. Download the ISO image for the Firmware Updater program and the TXT file that contains installation instructions. 3. Use any CD or DVD burning software to create a bootable disc with the ISO image. 4. Print the TXT file and follow the instructions to use the Firmware Updater program to update your system firmware. 34 ThinkServer TS140 User Guide Chapter 6. Installing, removing, or replacing hardware This chapter provides instructions on how to install, remove, or replace hardware for your server. This chapter contains the following topics: • “Guidelines” on page 35 • “Removing the server cover” on page 37 • “Removing and reinstalling the front bezel” on page 38 • “Installing, removing, or replacing hardware” on page 40 • “Completing the parts replacement” on page 79 • “Installing security features” o...
Dieses Handbuch ist für folgende Modelle:PC Desktops - ThinkServer TS140 (70A1) (6.3 mb)
PC Desktops - ThinkServer TS140 (70A4) (6.3 mb)
PC Desktops - ThinkServer TS140 (70A5) (6.3 mb)