Stimmen - 5, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Aastra Telecom Dateigröße: 14.12 mb Dateiname: Unterrichtssprache:

Line 6 key (if available) - Selects line six. 13 None No function selected. Line 7 key (if available) - Selects line seven. 14 None No function selected. Line 8 key (if available) - Selects line eight. 15 None No function selected. Line 9 key (if available) - Selects line nine. 41-001160-01, Rev 00, Release 2.3 5-153 IP Phone Administrator Guide Operational Features Feature Key Programming Guidelines The following are guidelines to use when programming the feature keys on the handset: • All handsets paired with the same Base Station have the same programmed functions since the web interface applies the functions to all the handsets paired with that base. • A newly registered handset or handset that was out-of-range during the programming needs to perform an "off-hook and on-hook" sequence in order for the newly programmed function to be broadcasted to the affected handsets. Simply press the (V. key from the idle state to go off-hook. Then, press the y key to go back on-hook. • Duplicate functions can exist in the feature key as there is no filtering or duplicate checking done on the handset or the base. • If no line keys are programmed for the feature key, the handset is restricted to intercom calls only. • If all 12 programmable functions have been programmed to "None", the user is presented with a List empty message when the feature key is pressed. • For security reasons, the user has 180 seconds (3 minutes) to complete the programming. Otherwise, the phone displays the following error: ** Error **: Session expired, Please reload page. • For security reasons, the user must submit the page from the same browser that was used to load the page. If the user tries to submit the page from any other IP address, the following error displays: ** Error ** Session invalid. Different Client IP Addresses. — Please reload page 5-154 41-001160-01, Rev 00, Release 2.3 Configuring Operational Features Operational Features Handset Feature Key Functions You can configure the features keys on the 57i CT handset to perform specific functions using the configuration files or the Aastra Web UI.The following table identifies the available functions for the feature keys on the 57i CT handset. The following Handset Key Functions Table lists the available functions for the keys on the 57i CT IP Phone. Handset Key Functions Table Feature Key Function Configuration File Parameter Aastra Web UI Parameter Description None none None Indicates the key is disabled. This option is available from Web UI only. Line (Lines 1 through 9 are available for selection) line Line Indicates the key is configured for line use. Icom icom Icom Indicates the key is set to be used as the Intercom key. For more information about the Icom key, see your Aastra IP Phone 57i CT User’s Guide. For information about other Intercom features, see “Incoming/Outgoing Intercom with Auto-Answer and Barge In” on page 5-98. Directory dir Dir Indicates the key is set for accessing the Directory List. For more information about the Directory List, see the section “Directory List” on page -282. Callers callers Callers Indicates the key is set for accessing the Callers List. For more information on the Callers List, see the section “Callers List” on page -273. 41-001160-01, Rev 00, Release 2.3 5-155 IP Phone Administrator Guide Operational Features Feature Key Function Configuration File Parameter Aastra Web UI Parameter Description Transfer xfer Xfer Indicates the key is configured as a transfer key for transferring calls. For more information about the Xfer key, see your Aastra IP Phone 57i CT User’s Guide. Park park Park Indicates the key is set to be used as a park key to park an incoming call. For more information on park, see the section “Park/Pick Up Key” on page 5-219. Pickup pickup PickUp Indicates the key is set to be used as a pickup key to pick up a parked call. For more information on pickup, see the section “Park/Pick Up Key” on page 5-219. Conference conf Conf Indicates the key is configured as a conference key (for local conferencing). (For Sylantro and Broadsoft Servers) An Administrator can also enable centralized conferencing on the IP Phones. For more information about using the Conference key, see your Aastra IP Phone 57i CT User’s Guide. For information about enabling centralizing conferencing, see “Centralized Conferencing (for Sylantro and Broadsoft Servers)” on page 5-341. 5-156 41-001160-01, Rev 00, Release 2.3 Configuring Operational Features Operational Features Feature Key Function Configuration File Parameter Aastra Web UI Parameter Description Public public Public Indicates the key is configured to toggle from public to private mode. A public and private key can be used when at a line item in the Directory List. The Private key toggles a number in the Directory List to private. The Public key allows a number in the Directory List to be sent to the handsets. A 57i CT accepts a maximum of 50 entries...

Herunterladen

Geben Sie zwei Ziffern: