Stimmen - 1, Durchschnittliche Bewertung: 3 ( )

Hersteller: Black & Decker Dateigröße: 2.04 mb Dateiname: Unterrichtssprache:

Handle or straining it at outlet and appliance connections. TAMPER-RESISTANT SCREW This appliance is equipped with a resistant screw to prevent removal To reduce the risk of fire or electric the bottom cover. There are no user serviceable parts inside. Note: If the power supply service agent or a similarly 1 Product may vary slightly from what is illustrated. 1. Regular pod † 2.Two-sided, regular pod holder (Part #1000000632-00) 3. Lid 4. Lid handle † 5.Water Reservoir (Part #177611-00) 6. Base 7. Control panel † 8. Brewing plate (Part #179721-00) † 9. Splash guard (Part #1000000506-00) † 10. Specialty pod holder (Part #1000000633-00) 11. Specialty coffee pod (not included) † Consumer replaceable 2 HCC100Pub1000001238RV1 11/2/04 2:13 PM Page 4 How to Use This appliance is for household use only. TO PREP THE UNIT BEFORE FIRST USE: 14 ANCEL B A D E F G 1. Remove the water reservoir from back of unit (A). Fill with water to MAX line and replace into unit. 2. Place a 9-oz. or larger cup on brewing plate. 3. Push the 9-oz. brew button (B) and allow water to cycle through the unit and into the cup. 4. The brew button light will remain on until the brewing cycle is finished. 5. Your Home Cafe ™ unit is now ready to brew. Note: During the priming cycle, the unit will be loud and create a larger than normal amount of steam. TO BREW A HOME CAFE ™ BEVERAGE: 1. Remove water reservoir from back of unit; fill with water to at least the 7, 9 oz. line and replace into unit. 2. Unlock the unit lid by pushing the lid handle toward the back of the unit (C). 3. Lift the unit lid to the fully open position (D). 4. Insert a coffee pod in the pod holder with the flat side up (E). For a 14-oz. cup of coffee, remove pod holder, flip, and place back into unit, place two pods in the deeper side of the pod holder, both with the flat side up. Fill with water to at least the 14-oz. line. 5. Place a cup or mug on the brewing plate. 6. Close the lid. 7. While holding the top of the lid with one hand, pull the lid handle with the other toward the front of unit until it locks (F). 8. Push the desired brew button. The brew button light will remain on until the brewing cycle is finished. 9. When the indicator light goes out, remove the filled mug from the brewing plate to enjoy your coffee. 10. To dispose of used pod, unlock unit lid and remove the pod. TO BREW A HOME CAFE ™ SPECIALTY COFFEE POD: Specialty pods will be available at your favorite retailers Go to for more information. 1. Follow steps 1 through 3 above. 2. Remove the regular pod holder and insert holder (G). 3. Insert a specialty coffee pod in the the flat side up. 4. Place a cup or mug on the brewing 5. Close the lid and pull the unit until it locks. 3 6. Push the 7-oz. brew button. Specialty pod beverages MUST be brewed with the 7-oz. brew button to maximize flavor and consistency. The brew button light will remain on until the brewing cycle is finished. 7. When the indicator light goes out, remove the filled mug from the brewing plate to enjoy your coffee. 8. When brewing creamy, specialty pods, clean the specialty pod holder and splash guard after brewing or at the end of the day. Brewing Tips 7 oz 9 oz 14 oz Strong Regular N/A Extra Strong Strong Regular • Do not use the same pod twice. The best coffee flavors are extracted the first time water passes through the pod. • Do not use damaged pods. • Do not use other brands of coffee po...

Herunterladen

Geben Sie zwei Ziffern: