Stimmen - 3, Durchschnittliche Bewertung: 4.3 ( )

Hersteller: Black & Decker Dateigröße: 2.04 mb Dateiname: HCC100811.pdf Unterrichtssprache:

Specialty pod beverages MUST be brewed with the 7-oz. brew button to maximize flavor and consistency. The brew button light will remain on until the brewing cycle is finished. 7. When the indicator light goes out, remove the filled mug from the brewing plate to enjoy your coffee. 8. When brewing creamy, specialty pods, clean the specialty pod holder and splash guard after brewing or at the end of the day. Brewing Tips 7 oz 9 oz 14 oz Strong Regular N/A Extra Strong Strong Regular • Do not use the same pod twice. The best coffee flavors are extracted the first time water passes through the pod. • Do not use damaged pods. • Do not use other brands of coffee pods or loose grounds with a filter. For the optimal Home Cafe™ experience, use Folgers ® or Millstone ® Home Cafe™ coffee pods. Care and Cleaning This product contains no user serviceable parts. Refer service 1. Before cleaning, unplug the unit and allow it to cool fully. 2. Unlock the pod handle and lift the unit lid. 3. Remove the pod and discard. 4. Remove the pod holder and splash guard and wash 5. Wipe surface with a clean, damp cloth. Do not the surface. 6. Rinse and dry all parts thoroughly. Never immerse unit/base in water. Removing mineral deposits: After continual use, mineral deposits will vary according to the hardness operated. If mineral deposits of the unit. Regular descaling is 4 HCC100Pub1000001238RV1 11/2/04 2:13 PM Page 6 1. Pour 8-oz. white vinegar into the water reservoir. Add 6-oz. fresh water. (Make sure the pod holder and the splash guard are both inserted and that there is no pod in the holder.) 2. Set a 7-oz. or larger mug on the brewing plate. 3. Press 7-oz. brew button and let the cleaning solution brew through unit. 4. When unit stops, empty the mug and return it to the brewing plate. 5. Press 7-oz. brew button again. Empty the mug and return it to the brewing plate. 6. Fill water reservoir with 16-oz. fresh, cold water. 7. Press 7-oz. brew button to flush out the remaining solution. Empty the mug and return it to the brewing plate. 8. Press the 7-oz. brew button to repeat the process. 9. Wash the pod holder and splash guard as instructed in the Care and Cleaning section. To Store: Unplug and store in a clean, dry place. Troubleshooting My Home Cafe ™ brewer runs out of water in the middle of a brew. If the unit runs out of water, it will automatically stop brewing. Refill the water reservoir. Start with a fresh cup and coffee pod and brew your next cup. I push the brew button, but nothing happens. Make sure the unit is plugged in, the water reservoir is full, and the lid handle is in the closed position. If there is still no power to the brewer, call 1-800-HomeCafe (466-3223). My coffee is not strong enough. Possible solutions: • Use either two mild blend pods or try a darker roast pod • Use a smaller cup size *• Do not use same pod twice My coffee is too strong. Possible solutions: • Use a mild blend coffee pod • Use a larger cup size *• Do not use same pod twice *The best coffee flavors are extracted the first time water passes through I have lost a removable appliance part. Call 1-800-HomeCafe or go to for replacement parts. The pod holder is clogged and the unit begins to overflow. Press the STOP button. Remove and wash the pod holder and splash guard. coffee pod. Open the lid and wipe off the water holes on holder and splash guard and insert a fresh pod. Make reservoir and resume brewing....

Herunterladen

Geben Sie zwei Ziffern: