Stimmen - 4, Durchschnittliche Bewertung: 4 ( )

Hersteller: Lennox Hearth Dateigröße: 1 mb Dateiname: Unterrichtssprache:

Donotplaceclothingorothermaterialsonornearthisappliance. IMPORTANT: READ AND UNDERSTAND THESE INSTRUCTIONS COMPLETELY BEFORE INSTALLING YOUR UNVENTED ROOM HEATERS. These heaters are manually controlled. Models Tee joint TABLE OF CONTENTS VF4000-CMN-2 and VF4000-CMP-2 feature a Pipe compound General Information ......................... page 2 gas valve incorporating a millivolt operating system. Building Supplies Should Include: Inventory ......................................... page 2 Tools and Building Supplies ............ page 2 A spark ignition system (piezo) allows the heater Framing materials Installation Applications .................. page 2 pilot gas to be lit without the use of matches or Wall finishing materials batteries and permits operation of the heater Caulking materials (noncombustible) Important Safety Information .......... page 2 during a power outage. Fireplace surround materials Codes .............................................. page 3 Combustion and Ventilation Air ....... page 3 These heaters are fitted with a specially de- Installation Applications signed pilot (ODS) which responds to the Location of Fireplace ....................... page 4 amount of oxygen available in the room and 1. Fireplace built into a framed wall. Clearances ....................................... page 5 shuts the heater off before the oxygen level Preinstallation .................................. page 5 drops below 18%. The pilot can be relit only 2. Fireplace installed with oak surround and/ when fresh air is available. Refer to the Com or platform (Refer to the SUR-5/6 unfin- Installation – Built-In ....................... page 5 bustion and Ventilation Air section. ished oak veneer surround installation in- Connecting Gas Line ........................ page 6 structions, P/N 903593). The VF4000 Series Unvented Room Heaters may be built into a framed wall, or installed in an Gas Pressure Check......................... page 6 Check the inventory list to be sure that you have Electrical Wiring – Optional Blower . page 7 optional oak surround. all the necessary parts in usable condition. Also Finished Wall Details ....................... page 8 check for concealed damage. This heater has been tested to the standards of ANSI Z21.11.2 unvented heaters. Installation – Surround .................... page 8 Log Assembly .................................. page 8 IMPORTANT SAFETY INFORMATION Flame Appearance ........................... page 9 Do not install these unvented room heaters in INSTALLER: PLEASE LEAVE THESE INSTRUC- a bedroom or bathroom as all units exceed Optional Equipment ......................... page 10 TIONS WITH THE OWNER. maximum allowable BTU/Hr input of 10,000. Forced Air Kit ................................... page 10 Operation and Care .......................... page 11 OWNER: PLEASE RETAIN THESE INSTRUC- Inventory TION FOR FUTURE REFERENCE. Cleaning and Servicing .................... page 11 Unvented Gas Fireplace Replacement Pa...

Herunterladen

Geben Sie zwei Ziffern: