Stimmen - 4, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: State Industries Dateigröße: 202.54 kb Dateiname: SCOSS00105.pdf Unterrichtssprache:

Engineered for maximum insulation and heat reflection. Unique design assures more complete combustion by stabilizing flame pattern. Interrupted Ignition – Reduces electrical consumption. Oil Solenoid Safety Valve – Standard on GPO75 385, GPO75 455 and GPO69 700. 3/4” Drain Valve – Provided in lower tank for fast draining. Two Hand-Hole Cleanouts – Allows easy cleaning on standard models GPO75 385 and larger and ASME models. Anodic Protection – For longer tank life. Flame Observation Port – Permits convenient flame check. Foam Insulation – Saves fuel, helps assure constant temperature, vermin proof. Jacket – Heavy gauge steel with baked enamel finish over bonderized undercoat. Not approved for installation on combustible flooring. Easy To Install Burner – Three bolt mounting of burner assures easy installation. Barometric Draft Regulator CSA Certified and ASME Rated T&P Relief Valve CAUTION: Units must be installed on non-combustible surface. Limited Warranty: Other Features: – Two layers of high temperature ceramic fiber insulation in combustion chamber Limited Warranty Outline – Flame inspection port opening – If the tank should leak any time during the first three – Mounted on rugged channel iron skids years, under the terms of the warranty, State Water – Multiple anodes for protection Heaters will furnish a replacement heater; installation, labor, handling and local delivery extra. Optional Features: – NOTE: This Outline Is NOT A Warranty. – Two Stage Pump – For use with underground oil storage tanks. complete information, consult the written – ASME Construction – Available on models GPO84 315, GPO75 385, GPO75 455, warranty or State Water Heaters. GPO69 700. ASME units have 160 psi working pressure. For more information on Titan™ contact: State Water Heaters 500 Tennessee Waltz Parkway, Ashland City, TN 37015 800-365-0024 Toll-free USA SCOSS00105 October 2012R COMMERCIAL ™ TITAN Commercial Oil Water Heater SPECIFICATIONS E B A C D . NPT INLET & OUTLET OPENINGS 1. NPT T&P VALVE OPENING ELEC. ENTRY ASME(ON SELECTED MODELS) Output (Gallons) Approximate Storage Input* ShippingModel Number Capacity BTU/Hr. Firing Recovery Dimensions In Inches Wt. (lbs.) Water U.S. Rate Motor Connections Gallons GPH HP Standard ASME In Out . . . . ™™ . . ™™ . . ™™ . . ™™ . . *Based on No.2 fuel oil. Capacity ratings are actual heater performance at 80% thermal efficiency. **These models are available with ASME construction. When ordering ASME construction, add “ A ” to end of model model. Example: GPO 69 700OE A NOTE: Above 2000. altitude, input ratings should be reduced 4% for each 1000. above sea level. GPO SUGGESTED SPECIFICATION Water heater(s) shall be commercial oil model number______________or equivalent. Heater(s) shall have a minimum oil firing rate of ______________gph at 100°F temperature rise and a storage capacity of _________________gallons. The 160 psi working pressure tank shall be glass-lined with the alkaline borosilicate...

Herunterladen

Geben Sie zwei Ziffern: