Stimmen - 2, Durchschnittliche Bewertung: 4.5
(
)
)
|
Anleitung Zusammenfassung
38, 39). 37 t Remote Operation from a Touch Tone Phone Direct Remote Operation Once you have entered the remote code, you can also control your unit by direct commands instead of using the voice menu. To end the remote operation, hang up anytime. Direct commands NEW MESSAGE PLAYBACK IzJ •Only new messages are played back. ALL MESSAGE . PLAYBACK UL •All messages are played back. REPEAT (During playback) LL •The current message is repeated. sk|p ^ (During playback) •The current message is skipped. The next message is played. CHANGING PLAYBACK SPEED (During playback) D • Each time you press the button, the playback speed will change to slow/normal. STOP (9) ^ J •Operation is stopped temporarily. •To resume operation, enter a direct command within 15 seconds, or the voice menu will start. GREETING MESSAGE RECORDING RE 4 CO \ (9] v j •A long beep sounds. «After the beep, talk immediately for up to 2 minutes. •The recording is stopped. •The recorded message is played. ERASING A rrr\ rjr\ *The current message is erased. SPECIFIC I J 13J *A short beep will sound and the next MESSAGE message will be played. (During playback) 38 ERASING ALL MESSAGES ®© •All recorded messages are erased. •A long beep sounds and "No messages” is heard. ANSWERING SYSTEM OFF •The unit hangs up and will not answer calls until turned on again. Turning on the answering system Call your unit and wait for 15 rings. •The unit will answer and the greeting message will be played. •The answering system will turn on. Hang up or enter the remote code for other options. •When turning on the answering system using a rotary or pulse service telephone, you cannot enter the remote code for other options. Skipping the greeting message After calling your unit, press © during the greeting message. •The unit skips the rest of the greeting message and you can start recording your message after the long beep. 39 Remote Operation with the Handset You can operate your answering system with the handset. The announcements and recorded messages can only be heard with the handset. Summary of remote operation Press (FLASH/CALL WAIT/PLAYBACK). •The number of new messages is heard. I Enter the desired direct commands (p. 41). • If you do not enter a command, the voice menu will start (p. 41). •After the voice menu, all message playback will start. I To end remote operation, press i flash/call, wait/playback 1. •The messages are saved. •The unit will announce the remaining recording time after playback, if it is less than 5 minutes. • If the unit starts to ring during the remote operation, press i*\1 or to answer the call. The remote operation is ended. •If you hear "Memory full” after playback, erase some, or all, of the messages (P- 41). 40 Voice menu If no commands are entered after you press 1 FLASH/CALL wait/playback ), the unit will start the following voice menu. “Press 4 to play back new messages. Press 5 to play back all messages.” •You can enter direct commands even if the voice menu has started. Direct commands NEW MESSAGE PLAYBACK ® •Only new messages are played back. ALL MESSAGE PLAYBACK © ©All messages are played back. REPEAT (During playback) •The current message is repeated. SKIP (During playback) © •The current message is skipped. The next message is played. CHANGING PLAYBACK SPEED (During playback) (3) • Each time you press the button, the playback speed will change to slow/normal. STOP (9) •Operation is stopped temporarily. •To resume operation, enter a direct command within 15 seconds, or the above voice menu will start. ERASING A SPECIFIC MESSAGE (During playback) ®® •The current message is erased. •A short beep will sound and the next message will be played. ERASING ALL MESSAGES ®© •All recorded messages are erased. •A long beep sounds and “No messages” is heard. ANSWERING SYSTEM OFF ® •“Answer off” is heard and the answering system is turned off. ANSWERING SYSTEM ON ® •“Answer set” is heard and the answering system is turned on. 41 Wall Mounting This unit can be mounted on a wall phone plate. 1 Push the hook and turn it around. Turn the hook until a click is heard. Connect the AC adaptor. To Power Outlet 3Tuck the telephone line cord inside the wall mounting adaptor, then push it in the direction of the arrow. •The word “UP" should face upward. Connect the telephone line cord. Mount the unit, then slide down. •Raise the antenna. • Fasten the telephone line cord to prevent it from being disconnected. To charge the battery: Fix the charge contacts (®) and insert the hook to the handset hole ((g)). •The IN USE/CHARGE/HOLD indicator lights. Battery Replacement If the RECHARGE indicator flashes after being fully charged, replace the battery with a new Panasonic P-P504 battery. To order, call the accessories telephone number on page 2. To avoid loss of memory, replace within 3 minutes. 1 Press the notch on the battery cover firmly and slide it as indicated by the arrow....