Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Eaton Electrical Dateigröße: 274.8 kb Dateiname: Unterrichtssprache:

Insert the speaker into the hole. Turn All Mounting Brackets into the “in” Position Mounting Brackets in the “in” Position EATON CORPORATION Cutler-Hammer Wall and Ceiling Mounted Speakers Installation Manual IM00412012E Effective: May 2006 Speaker Installation (continued) Reapplying the Speaker Grill Make sure that the speaker is level and carefully tighten the mount-Once the tweeters are adjusted, the grill can be replaced. Recheck ing screws to secure the speaker. As you tighten the screws, the that the speaker is level. Gently press the speaker grill into the mounting bracket feet will flip into position to grip into the drywall. Do grooves on the speaker frame. Be sure to apply pressure evenly as not over tighten the mounting screws. you press the grill into place. Uneven pressure can cause damage to the grill. Tightening all the screws will flip the mounting brackets into the open position to grip drywall. Mounting Brackets Opened to Grip Into Drywall Adjusting Swivel Tweeters The adjustable, swivel tweeter allows you to direct mid-range and high-range frequencies towards or away from the listening area. Adjustable Swivel Tweeter Speaker With Adjustable Swivel Tweeters To adjust the position of the tweeter, gently apply pressure on the edge of the tweeter housing toward the desired area. Caution: Too much pressure during this procedure can cause damage to the tweeter. Push Evenly the Grill Back Onto the Speaker Frame Setting Level Controls To achieve desired sound, set tweeter levels first, then match bass output. If only two channels (R & L) of your amplifier are driving more than one pair of speakers, Eaton suggests using the lowest output position for the woofer until you can make sure the amplifier can handle the additional woofer settings. Painting the Speaker Speaker Grill: Remove the speaker grill from the speaker frame. Paint the grill lightly, being careful not to clog the holes. Do not paint the grill while it is still on the speaker. Speaker Frame: Eaton suggests painting all parts of the speaker prior to the installation. If you must paint after installation, place the provided paint guards around the grill area. After the paint guards are in place, paint the frame of the speakers. Adjusting the Tweeter EATON CORPORATION Cutler-Hammer Wall and Ceiling Mounted Speakers Installation Manual IM00412012E Copyright 2006 Speaker Specifications SPECIFICATION ESWA6500SW ESWA6500SC ESWA6550SC ESWA0800SC Type Tweeter Woofer Power 2-Way In-Wall, Rectangle Shape 1-Inch Cloth Swivel 6.50-Inch Polyproylene 80 Watts 2-Way In-Ceiling, Round Shape .75-Inch Mylar Swivel 6.50-Inch Polyproylene 80 Watts 2-Way In-Ceiling, Round Shape .75-Inch Cloth Swivel 6.50-Inch Polyproylene 80 Watts 2-Way In-Ceiling, Round Shape 1-Inch Cloth Swivel 8-Inch Polyproylene 120 Watts Impedance Frequency Range Sensitivity Packaged Finished Dimensions (Inches) Cutout Dimensions (Inches) 8 Ohms 55 – 20,000 Hz 89 dB 1 Pair 12.00 High x 8.63 Wide x 3.13 Deep 10.75 High x 7....

Herunterladen

Geben Sie zwei Ziffern: