Stimmen - 3, Durchschnittliche Bewertung: 4.7 ( )

Hersteller: Alice & Law Dateigröße: 2.06 mb Dateiname: 8844f136-0dff-4168-98fc-99c5c93ef88f.pdf Unterrichtssprache:

KX-FL501AL - for Australia KX-FL501NZ - for New Zealand Thank you for purchasing a Panasonic facsimile. For your future reference Date of purchase Serial number (found on the rear of the unit) Dealer’s name and address Dealer’s telephone number Caution: l Do not rub or use an eraser on the printed side of recording paper, as the print may smear. l KX-FL501AL is designed for the Australian network. l KX-FL501NZ is designed for the New Zealand network. Copyright: This manual is copyrighted by Kyushu Matsushita Electric Co., Ltd. (KME) and its licensee. Under the copyright laws, this manual may not be reproduced in any form, in whole or part, without the prior written consent of KME and its licensee. © Kyushu Matsushita Electric Co., Ltd. 2001 For Australian users Warning: . Please ensure that a separate telephone, not dependent on local power, is available for emergency use. . This equipment will be inoperable when mains power fails. . When a failure occurs which results in the internal parts becoming accessible,disconnect the power supply cord immediately and return this unit to an authorised service centre. . Disconnect the telephone connection before disconnecting power connection prior to relocating the equipment, and reconnect the power first. . To minimise the possibility of lightning damage, when you know that a thunderstorm is coming, we recommend that you: A. Unplug the telephone line cord from the phone jack. B. Unplug the power supply cord from the AC power outlet. . No “000” or other calls can be made from this device during a mains power failure. . The earcap on the handset is magnetised and may retain metallic objects. For New Zealand users Warning: . WHEN A FAILURE OCCURS WHICH RESULTS IN THE INTERNAL PARTS BECOMING ACCESSIBLE, DISCONNECT THE POWER SUPPLY CORD IMMEDIATELY AND RETURN THIS UNIT TO AN AUTHORISED SERVICE CENTRE. . DISCONNECT THE TELECOM CONNECTION BEFORE DISCONNECTING THE POWER CONNECTION PRIOR TO RELOCATING THE EQUIPMENT, AND RECONNECT THE POWER FIRST. . NO “111” OR OTHER CALLS CAN BE MADE FROM THIS DEVICE DURING A MAINS POWER FAILURE. IMPORTANT NOTICE Under power failure conditions, this telephone may not operate. Please ensure that a separate telephone, not dependent on local power, is available for emergency use. Notice: . The grant of a Telepermit for any item of terminal equipment indicates only that Telecom has accepted that the item complies with minimum conditions for connection to its network. It indicates no endorsement of the product by Telecom, nor does it provide any sort of warranty. Above all, it provides no assurance that any item will work correctly in all respects with another item of Telepermitted equipment of a different make or model, nor does it imply that any product is compatible with all of Telecom’s network services. . This equipment shall not be set to make automatic calls to the Telecom “111” Emergency Service. . This equipment should not be used under any circumstances which may constitute a nuisance to other Telecom customers. . Not all telephones will respond to incoming ringing when connected to the extension socket. Important information (for Australian users) Instructions to customer Installation Attached to this apparatus is an approval label. This label is evidence that it is a “Permitted Attachment” which has been authorised to be connected to your telephone service. Conditions relating to connection and operation of this Permitted Attachment are contained in Telecommunications General By-Law 220 (5). You are authorised to install this Permitted Attachment yourself by plugging it into the line socket of any regular telephone. You may connect it in place of your existing telephone or to any spare telephone socket installed in your premises. To disconnect your existing telephone you must first remove its plug from the line socket. You can then insert the plug of your Permitted Attachment into the socket and use your equipment. If the plug of your existing telephone cannot be readily removed, you will have to remove the screw securing it. To do this proceed as follows: 1. Loosen screw “A” sufficiently to remove the socket cover. (See Fig. 1.) 2. Remove screw “B” and withdraw the plug. (See Fig. 2.) 3. Replace screw “B”. (See Fig. 3.) Ensure that it screws completely into the socket recess. (If the screw is too long, increase the hole depth or replace the screw with one 5 mm shorter.) 4. Replace socket cover and tighten screw “A”. (See Fig. 4.) SOCKET PLUG SCREW “A” Fig. 1 SCREW “B” Fig. 2 TELEPHONE CORD Connect to the PLUG as shown in Fig. 1. ) ( SCREW “B” SCREW “A” SOCKET Fig. 3 Fig. 4 If you are satisfied with the operation of your telephone service after plugging in your Permitted Attachment, your installation is completed. You will be unable to connect this Permitted Attachment if your telephone service consists only of a wall phone or an old style telephone which is not connected by means of a modern plug and socket. In such cases a new socke...

Herunterladen

Geben Sie zwei Ziffern: