Stimmen - 3, Durchschnittliche Bewertung: 3.7 ( )

Hersteller: Brother Dateigröße: 2.06 mb Dateiname: Unterrichtssprache:

The selected bell or melody will sound while setting. MELODY (A, B, C, D) (The default setting is in bold type.) Features Summary Advanced features! How to set menu options 1. Press MENU . 2. Rotate EASY DIAL until the following is displayed. Display: ADVANCED MODE Press SET and rotate EASY DIAL until the desired feature is displayed. 3. Press SET . Programming table 4. Rotate EASY DIAL until the desired setting is displayed. 5. Press SET . 6. Press MENU . Note: . Step 4 may be slightly different depending on the feature. l See page 56 for more details. Code Display & Feature Settings How the unit operates #22 To print the journal report automatically for fax communications. AUTO JOURNAL ON “ON”: The unit will print the journal report automatically after every 30 new fax communications (p. 37). OFF #23 If you have difficulty sending an overseas fax, activate this feature before starting transmission. This feature makes sending documents easier as the transmission speed is slowed down. OVERSEAS MODE ON After transmission, the unit will turn off automatically. l This feature is not available for broadcast transmission. l The calling charge may be higher. OFF #25 To send a fax automatically at a specified time. This allows you to take advantage of low-cost calling hours offered by your telephone company. l The setting can be reserved to take place up to 24 hours in advance. DELAYED SEND ON / fax no. / hh:mm To send a document: 1. Insert the document. 2. Follow steps 1–3 above. 3. Rotate to select “ON”. 4. Press . 5. Enter the fax number. 6. Press . 7. Enter the transmission start time. Press to select “AM” or “PM”. 8. Press . 9. Press . l To cancel after programming, press then .SET STOP MENU SET SET SET EASY DIAL OFF #26 To print the Caller ID list automatically. AUTO CALL. LIST ON “ON”: The unit will print the Caller ID list automatically after every 30 new calls (p. 31). OFF (The default setting is in bold type.) Features Summary Advanced features (cont.)! How to set menu options 1. Press MENU . 2. Rotate EASY DIAL until the following is displayed. Display: ADVANCED MODE Press SET and rotate EASY DIAL until the desired feature is displayed. 3. Press SET . Programming table (cont.) 4. Rotate EASY DIAL until the desired setting is displayed. 5. Press SET . 6. Press MENU . Note: . Step 4 may be slightly different depending on the feature. l See page 56 for more details. Code Display & Feature Settings How the unit operates #30 To change the number of rings when the unit detects a voice call in TEL/FAX mode. SILENT FAX RING 3, 4, 5, 6, 7, 8, 9 See pages 48 and 49 for details. #31 If you subscribe to a Distinctive Ring Service from your telephone company, activate this feature. RING DETECTION ON See page 52 for details. OFF #37 To receive a fax document that is longer than your recording paper. AUTO REDUCTION ON “ON”: The unit will fit a received document onto your recording paper. “OFF”: The unit will print the original size. OFF #39 To adjust the display contrast. LCD CONTRAST NORMAL “NORMAL”: For normal contrast “DARKER”: Used when the display contrast is too light.DARKER #41 If you use an extension telephone and wish to use it to receive a fax, activate this feature, and enter the code (p. 50). l This code is also used to receive a voice message and a fax in the same call (p. 47). FAX ACTIVATION ON / CODE= 9 1. Follow steps 1–3 above. 2. Rotate to select “ON”. 3. Press . 4. Enter your code from 2 to 4 digits, using 0–9 and . 5. Press . 6. Press . l Do not enter “0000”. MENU SET SET EASY DIAL OFF (The default setting is in bold type.) Features Summary Code Display & Feature Settings How the unit operates #44 To alert you with beeps when a received document is stored into memory due to a problem. RECEIVE ALERT ON If you hear slow beeps, clear the printing problem or supply paper to print the stored document. The beeps will stop. OFF #46 To receive a fax automatically when you answer a call and hear a fax calling tone (slow beep). FRIENDLY RCV ON “ON”: You do not have to press for fax reception.FAX START OFF #49 To answer a call with an extension telephone in TEL/FAX mode (p. 49). AUTO DISCONNECT ON / CODE= 0 1. Follow steps 1–3 on page 60. 2. Rotate to select “ON”. 3. Press . 4. Enter your code from 2 to 4 digits, using 0–9 and . 5. Press . 6. Press .MENU SET SET EASY DIAL OFF #58 To send or copy a document with faint or dark writing, set this feature before starting transmission or copying. ORIGINAL NORMAL “NORMAL”: Used for normal writing. “LIGHT”: Used for faint writing. “DARKER”: Used for dark writing. l This feature will return to the normal mode after transmission or copying. LIGHT DARKER #68 ECM stands for Error Correction Mode. To send a fax even if there is static interference on the telephone line. ECM SELECTION ON This feature is available when the transmitting/receiving stations are ECM compatible. l If documents are in memory, clear them before making the setting (p. 44). OFF #70 If you have a pag...

Herunterladen

Geben Sie zwei Ziffern: