Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: Elk Dateigröße: 180.78 kb Dateiname: el-m1kpas.pdf Unterrichtssprache:

Ready, Trouble, Armed, Stay, and Exit LEDs are lighting in a clockwize rotation. Keypad is communicating but it has not been enrolled with the Control. Use the bus module enrollment procedure to enroll the keypad into the Control. Numeric keys All Flashing Keypad is in the Setup Mode is waiting for an address setting. Refer to the instructions for address setting OR press the Exit key to return to regular operation. Erratic operation. LEDs and buttons do not seem to be responding properly. Improper data bus termination, improper wiring or wiring, OR another keypad already exists at this data bus address. Check for: a. Reversed data bus wires. b. Improper data bus termination (see manual). c. Duplicate address "conflict" with another keypad. If all else fails swap with another keypad making sure to re-address and re-enroll. If problem goes away the old keypad may be defective. If problem persists contact Tech Support. Please Note: The back page of this booklet is designed so that it may be separated from the rest of the pages. It may then be folded in half to convert into a User Operation Guide for the M1KPAS Arming Station. It may be placed inside or with the regular M1/EZ8 User Guide book as a suppliment to those complete instructions. Arming in the .Away. Mode Arming in the .Away. Mode Secure all protected doors and windows. 1. Enter a User code. 2. The Armed and Exit lights will illuminate and the exit tone will start. 4. Leave the premises during the exit delay. 5. At the end of the exit delay the alarm system will be armed Away. During the last 10 seconds of the exit delay time the exit tone will beat faster to warn you that the time isabout to expire. If you feel that you will be unable to get out and close the exit door in time we recommend thatyou return to the keypad, disarm, and rearm. Arming in the .Vacation. Mode Vacation mode is a second level of Away mode. It can be used to activate energy savingautomation features when the building will not be occupied for an extended period of time. Afterarming, pressing the Exit button at any time during the exit delay time to change the armed mode tovacation. Unfortunately there is no visual indication at the M1KPAS for vacation mode. Arming in the .Stay. Mode Stay mode arming is intended for use when the premises is occupied. All perimeter doorsand windows are armed, and all interior zones are excluded. Secure all protected doors and windows. 1. Enter a User code. 2. The Armed and Exit lights will illuminate and the exit tone will start. 3. Press the Stay key. The key will light up. All interior zones will be excluded and the exit tone will be silenced. Delayed entry/exit zones will still be delayed. 4. (Option, may not be enabled) Additional presses of the Stay key may allow scrolling todifferent modes of Stay arming if enabled by your installer. Additional modes are Stay Instant, Stay Night, and Stay Night Instant. The is no visual indication for the optional stay modes. (Inside Fold Line) Using the Quick Arm (Optional) If this feature was enabled by your installer, it will allow arming in either theAway or Stay modes without having to enter your user code. For security reasons however, auser code is always required to disarm. Secure all protected doors and windows. 1. Press the Exit or Stay key. 2. The Armed and mode light (Exit or Stay) will illuminate just as if you had entered youruser code. Changing Stay Modes While Armed (Optional) If this feature was enabled by your installer, it permits various levels of Staymode arming to be enabled (scrolled) without having to first disarm the system. The additionalStay mode arming levels may include: Instant, Stay Night, and Stay Night Instant. 1. Press the Exit or Stay key. 2. The Armed and mode light (Exit or Stay) will illuminate just as if you had entered youruser code. Disarming and Resetting the System After entering the premises through one of the assigned Entry delayed zones, the keypadwill sound a continuous entry delay tone. Refer to the System Notes for the amount of entry timeavailable. Disarming 1. Proceed directly to the keypad. 2. Enter a valid user code. 3. The entry delay tone should stop. 4. When the Armed light turns off the alarm system is disarmed. If a valid user code is not entered before the entry delay time expires, an alarm If this should occur proceed as follows: Auto Stay Arming (Optional) If this feature was enabled by your installer, it will automatically change armmode from Away to Stay if none of the perimeter delayed doors delaycountdown time. Secure all protected doors and windows. 1. Enter a User code. 2. The Exit key will light and the exit tone will start. 3. As long as there is not exit through any delayed andthe Exit light will go off at the end of the exit delay The system is now armed inthe Stay mode. Disarming and Silencing After an Alarm 1. Proceed directly to the keypad. 2. Enter your user code. 3. The entry delay tone should stop. 4. When the Armed light turns off ...

Herunterladen

Geben Sie zwei Ziffern: