Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
7. Press the Volume Buttons to adjust the volume of the unit. Programming a DVD 1. Insert a DVD into the unit. See the “Playing a DVD” operation on page 6. . After the DVD is inserted and loaded, press the Program Button on the remote control to display the Program Menu. 3. Use the Directional Buttons to move through the different program slots. 4. Highlight a slot and enter a Title (TT) number and Chapter (CH) number using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired titles and chapters are programmed. 5. Press the Enter Button on the remote to begin playing the programmed titles and chapters. Programming a CD 1. Insert a CD into the unit. See the “Playing a CD” operation on page 7. . After the CD is inserted and loaded, press the Program Button on the remote control to display the Program Menu. 3. Use the Directional Buttons on the remote to move through the twenty different program slots. 4. Highlight a slot and enter CD track numbers using the Number Keypad on the remote control. Repeat steps 3 and 4 until the desired tracks are programmed. 5. Press the Enter Button on the remote to begin playing the programmed tracks. Using the Video/Audio Output When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Connect the 3.5mm - RCA Cable (not included) to the AV Output on the unit and the audio/video inputs on the Television. . Turn the unit on by switching the Power Button to the On position. 3. Change the television to the correct audio/video input setting. 4. Audio and video played through the unit will now be seen and heard on the connected television. Television Using the Video/Audio Input When connecting two products using an RCA Cable, match the colored ports with the same colored connection. (Red to Red, White to White, and Yellow to Yellow) 1. Connect the 3.5mm - RCA Cable (not included) to the AV Input on the unit and the audio/video inputs on the DVD Player, Television, or Audio Device. . Turn the unit on by adjusting the Power Button to the On position. 3. Press and hold the Stop/DVD/AV In Button to switch to AV In Mode. 4. Change the DVD Player, Television, or Audio Device to the correct audio/video output setting. 5. Audio and video played through the DVD Player, Television, or Audio Device will now be seen and heard on the unit. 6. Press and hold the Stop/DVD/AV In Button to switch the unit back to DVD Mode. DVD Player, Television, or Audio Device Controls 10 1 3 4 15 14 13 1 11 10 9 8 7 6 5 Control Definitions LCD Display 7” TFT LCD Screen. DVD/CD Door Open the DVD/CD Door to expose the DVD/CD Drive. Headphone Jacks Connect headphones or earbuds to the Headphone Jacks to listen to the unit in private. Audio/Video Input and Output Use the Audio/Video Input and Output to connect the unit to a television, DVD Player, or other audio device. See pages 8 and 9. TFT On/Off The TFT On/Off switch turns the TFT Display off whenever the unit folds. F.FWD Button Press the F.FWD Button to skip through DVD chapters or CD tracks. Press and hold the F.FWD Button to search through a DVD or individual CD track. F.BWD Button Press the F.BWD Button to skip through DVD chapters or CD tracks. Press and hold the F.BWD Button to search through a DVD or individual CD track. Stop/DVD/AV In Button Press the Stop/DVD/AV In Button once to stop a DVD or CD during play. Press and hold the Stop/ DVD/AV In Button consecutively to stop a DVD or CD and switch between DVD and AV In Mode. Play/Pause Button Press the Play/Pause Button to play or pause a loaded DVD or CD. 10 Volume Buttons Press the Volume Buttons to adjust the volume of the audio output from the unit. 11 Open Button Press the Open Button to open the DVD/CD Door. 12 Charge Indicator Light When the Charge Indicator Light blinks red, the internal battery is being charged. If the Charge Indicator Light is not blinking, the internal battery is fully charged. 13 Power Indicator Light When the Power Indicator Light is lit green, the unit is powered on. 14 DC In (9V-12V) Use the DC In to connect the unit to an AC Outlet or a DC Car Outlet to power the unit. 15 Power Switch Adjust the Power Switch to turn the unit off or on. 11 Controls 1 17 18 19 0 1 3 4 6 7 30 3 33 35 37 38 8 39 31 5 34 36 16 9 Control Definitions 16 Display Button Press the Display Button to view the on screen display and see time information on the DVD or CD that is playing. 17 DVD/AV In/Power Button Press and hold the DVD/AV In/Power Button to switch between DVD and AV In Mode, or press to turn the power off and on. 18 Volume Buttons Press the Volume Buttons to adjust the volume of the unit. 19 Repeat A-B and 1/ALL When playing a DVD, press the Repeat A-B and 1/All Button once to designate an “A” point. Press the Repeat A-B and 1/All Button a second time to designate a “B” point and repeat the section of DVD movie between point “A” and point “B”. When playing a CD...