Login:
heruntergeladen wurde: 7   Dateigröße: 121 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

The filler strip will act as a spacer between the door case and adjacent cabinet and will prevent interference with cabinet door swing. The width of the opening must include filler panels. Note: When installed, the door should project forward 1” of adjacent 24”-deep cabinets. Location Requirements All Monogram Refrigeration Modules may be closed in on the top and sides as long as the front is unobstructed for air circulation and door swing. • Do not install these products where the temperatures

heruntergeladen wurde: 6   Dateigröße: 245 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Preparing Secure all loose items such as drawers by Be sure the wine reserve stays in an upright taping them securely in place to prevent position during moving. to move damage. Built-In Dimensions Wine Reserve Installation dimensions The wine reserve can be a free-standing model or can be built in using the cut-out dimensions below. (603 mm) (603 mm) 233/4. 233/4. 341/2. (876 mm) P

heruntergeladen wurde: 4   Dateigröße: 295 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

SAVE THESE INSTRUCTIONS IMPORTANTES INSTRUCTIONS DE SECURITE RACCORDEMENT ELECTRIQUE Ne coupez ni retirez en aucun cas la troisieme broche (mise a la terre) de la fiche du cordon d’alimentation. Pour votre securite, cet appareil doit etre correctement mis a la terre. Le cordon d’alimentation de cet appareil est muni d’une fiche a 3 broches (mise a la terre) qui se branche dans une prise mural ordinaire a 3 alveoles (mise a la terre) pour reduire au minimum les risques du chocs electriques. Faite

heruntergeladen wurde: 3   Dateigröße: 780 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

CABINET CABINET Front edge of product case 110° Front face 120° These products will fit flush to adjacent cabinets when installed with a Dim. A-width filler panel or cleat. The filler panel should be recessed or set back behind the door and even with the front edge of the product case. NOTE: Handle and handle standoff depth is 1-3/4" Product Dim. A ZDWI240, ZDBI240 1" ZDWC240, ZDWR240 1/2" ZDBC240, ZDBR240 1/2" *For a standard installation of Custom-Framed unit: The product must be installed so

heruntergeladen wurde: 0   Dateigröße: 295 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Pull the small slide sub-assembly completely forward. 3. Insert the sides of the drawer back into the guides. 4. Push until the tabs lock into place. Appearance may vary Sub-assembly Sub-assembly To replace, push drawer slide Pull small slide sub- arm back into unit assembly completely forward NOTE: Make sure the tabs on the full extension drawer guides are fully engaged before loading any bottles. Pull the drawers out all the way to the STOP position and push back in several times to make sure

heruntergeladen wurde: 1   Dateigröße: 175 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Whether you chose it for its purity of design or the assiduous attention to detail, you will find that your Monogram wine chiller’s superior blend of form and function will delight you for years to come. The information on the following pages will help you operate and maintain your wine chiller properly. Contents Built-In Dimensions . . . . . . . . . . . . . . . .10 Care and Cleaning . . . . . . . . . . . . . . . .8, 9 Consumer Information . . . . . . . . . . . .2, 3 Controls and Features . . .

heruntergeladen wurde: 1   Dateigröße: 279 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. Reversing the Door Swing Wine Chiller To reverse the door Parts included: 1. Top left case hinge 2. Bottom left case hinge 3. Left and right side decorative hinge cover 4. Decorative hinge screw hole cover 5. Torx® driver bit Tools required: 1. Phillips screwdriver 2. Electric drill To remove the door: 1. Flatten the shipping carton to use as a pad. 2. Remove the 2 screws and the to

heruntergeladen wurde: 34   Dateigröße: 123 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Whether you chose it for its purity of design or the assiduous attention to detail, you’ll find that your Monogram wine chiller’s superior blend of form and function will delight you for years to come. The information on the following pages will help you operate and maintain your wine chiller properly. If you have any other questions—please call the GE Answer Center® (800.626.2000). Contents Appliance Registration .................3 Built-In Dimensions .....................7 Care and Cleaning ..

heruntergeladen wurde: 0   Dateigröße: 102 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

Wall24" Cabinet14" Minimum110. Wall24" Cabinet 34-1/2" Min. 24" Min. 23-3/4" 34-1/2" (36"with top canopy) 23-3/4"1-1/2" Locate Outlet 9" Max. 10-1/2" 26-1/2" Including Handle 23-3/4" Min. Note: Handle andhandle standoffdepth is 2-3/4" All models are factory set for a 110° door swing. For a minimum 90° door swing: • Allow 5-1/4" min. clearance to wall on the hinge side. For a full 110° door swing: • Allow 15" min. clearance to wall on the hinge side. Note: If installing between frameless cabinets

heruntergeladen wurde: 2   Dateigröße: 561 kb   Hersteller: GE Monogram  
Kategorie: Dispenser
@name

The filler strip will act as a spacer between the door case and adjacent cabinet and will prevent interference with cabinet door swing. The width of the opening must include filler panels. Note: When installed, the door should project forward 1" of adjacent 24"-deep cabinets. Side-by-Side Installation For a complete refreshment center, install a Monogram Wine Reserve and Beverage Center together. • Products must operate from separate properly grounded receptacles. Door Swing Clearances All





Kategorien