drain. Unit shall be insulated with high-density, foamed in place polyurethane insulation with a non-conductive top breaker strip. Opening shall have stainless steel lift-up and fold-down lids with black plastic recessed handles. Door lock is standard. Ends of the upperstructure shall have die-stamped louvers to allow proper air flow to the condensing unit. Refrigeration system shall use HFC-134a refrigerant. Refrigerant flow shall be controlled by an expansion valve. Cabinet shall maintain 3

N6/ N10/ N14 Free- Standing Self- Contained Milk Or Beverage Dispensers Specifications Model Unit Height Crate Capacity H.P. Amps BTU Load BTU Capacity Ship Weight N6-1313-34 34” (86.4cm) 6 1/4 5.0 250 1170 382 lbs/ 173 kg N6-1313-36 36” (91.4cm) 6 1/4 5.0 250 1170 402 lbs/ 182 kg N10-1313-34 34” (86.4cm) 10 1/4 5.0 350 1320 545 lbs/ 247 kg N10-1313-36 36” (91.4cm) 10 1/4 5.0 350 1320 565 lbs/ 256 kg N14-1313-34 34” (86.4cm) 14 1/4 5.0 460 1420 650 lbs/ 295 kg N14-1313-36 36” (91.4cm) 14 1/4 5.0

Top and corner supports shall be 16-gauge stainless steel, welded, ground and polished into one integral unit. Interior liner shall be water-tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Unit shall be insulated with high-density, foamed-in-place environmentally friendly, Kyoto Protocol Compliant, Non ODP (Ozone Depletion Potential), Non GWP (Global Warming Potential) polyurethane insulation with a non-conductive top breaker strip. Refrigerated compartment

Shelleymatic® by Deleld N6/N10/N14 Free-Standing Self-Contained Milk Or Beverage Dispensers Project __________________________________ Item ____________________________________ Quantity ________________________________ CSI Section 11400 Approved _______________________________ Date ____________________________________ N6-1313-34 6 crate capacity, 34” height N6-1313-36 6 crate capacity, 36” height N10-1313-34 10 crate capacity, 34” height • • • N10-1313-36 10 crate capacity, 36” height N14-1313-3

Exterior bottom to be 14-gauge galvanized steel. Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.25” (3.2cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip. Each opening shall have an insulated, stainless steel folding lid with high impact plastic liner, molded rubber edge and black plastic handles. (1) stainless ste

14-gauge exterior bottom applies to self contained models only. Inner liner shall be water tight and constructed of 22-gauge stainless steel with a 1.00” (2.54cm) I.P.S. drain. Opening(s) shall have throat liners constructed of high impact plastic. Unit to be insulated with foamed-in-place polyurethane insulation with a non-conductive breaker strip. Each opening shall have an insulated, stainless steel folding lid with aluminum liner, molded rubber edge and black plastic handles. Each self-l