|
Anleitung Zusammenfassung
When you’ve removed all tracks from the clip, the MUSIC CLIP button goes off after the player plays the last track in the clip. Storing Specific Tracks (Delete Bank) You can delete unwanted tracks and store only the tracks you want. When you select the disc with the Delete Bank, you can play only the tracks you want. The player memorizes the Delete Bank for about 1 month, even if you turn off the player. CONTINUE SHUFFLE · FILE ERASE Number buttons >10 1EInsert or select the disc. 2EPress SHUFFLE to select “ALLEDISCS” or “1EDISC”. 3EPress the number buttons to delete the tracks you want to delete. The track number and “OFF” appears in the display and the track numbers you‘ve deleted disappear from the music calendar. If you’ve made a mistake Press the number button of the track. The track number and “On” appears in the display and the track will be restored. 4EPress FILE to store the remaining tracks. “FILE” and “DELETE” in the Custom File indication light up in the display. You can delete unwanted tracks during playback Press CLEAR while playing the track. The player starts playing the next track. If you press FILE, the player stores the remaining tracks. Additional InformationStoring Information About CDs (Custom Files) (CDP-CE505/C450Z only) Additional InformationStoring Information About CDs (Custom Files) (CDP-CE505/C450Z only) Playing using the Delete Bank 1EInsert or select the disc. “FILE” and “DELETE” in the Custom File indication light up in the display. 2EPress CONTINUE or SHUFFLE to select “ALL DISCS” or “1EDISC”. 3EPress aor one of the DISC1–5 buttons you want to start playing. Erasing the Delete Bank 1EInsert or select the disc. “FILE” and “DELETE” in the Custom File indication light up in the display. 2EPress FILE. “FILE” appears in the display. 3EPress ERASE while “FILE” appears in the display. The Delete Bank is erased. “ErASE” apperas in the display and “FILE” and “DELETE” in the Custom File indication disappear. Notes on CDs On handling CDs • To keep the disc clean, handle the disc by its edge. Do not touch the surface. • Do not stick paper or tape on the disc. Not this way • Do not expose the disc to direct sunlight or heat sources such as hot air ducts, nor leave it in a car parked in direct sunlight as there can be considerable rise in temperature inside the car. • Do not use any commercially available stabilizer. If you do, the disc and the player may be damaged. • After playing, store the disc in its case. On cleaning • Before playing, clean the disc with a cleaning cloth. Wipe the disc from the center out. • Do not use solvents such as benzine, thinner, commercially available cleaners or anti-static spray intended for vinyl LPs. Additional Information Additional Information TroubleshootingE If you experience any of the following difficulties while using the player, use this troubleshooting guide to help you remedy the problem. Should any problem persist, consult your nearest Sony dealer. There’s no sound. /Check that the player is connected securely. /Make sure you operate the amplifier correctly. /Adjust the playback level using the PHONE LEVEL control on the player (CDP-CE505 and CDP-C450Z only) or LINE OUT LEVEL +/– on the remote (except for CDP-CE305, CDP-C250Z and CDP-C661). The CD does not play. /There’s no CD inside the player (“no DISC” appears). Insert a CD. /Place the CD with the label side up on the disc tray correctly. /Clean the CD (see page 18). /Moisture has condensed inside the player. Remove the disc and leave the player turned on for about an hour (see page 2). The remote does not function. (except for CDP-CE305, CDP-C250Z and CDP-C661) /Remove the obstacles in the path of the remote and the player. /Point the remote at the remote sensor gon the player. /Replace all the batteries in the remote with new ones if they are weak. The player functions incorrectly. /The microcomputer chips may be operating incorrectly. Turn the power off, then turn it back on to reset the player. Specifications Compact disc player Laser Laser output Frequency response Signal-to-noise ratio Dynamic range Harmonic distortion Channel separation Output General Power requirements Where purchasedE USA Australia Power requirements 120 V AC, 60 Hz 240 V AC, 50/60 Hz Semiconductor laser (l = 780 nm) Emission duration: continuous Max 44.6 mW* * This output is the value measured at a distance of 200 mm from the objective lens surface on the Optical Pick-up block with 7 mm aperture. 2 Hz to 20 kHz ± 0.5 dB CDP-CE505/C450Z: More than 107 dB CDP-CE405/CE305/C350Z/C250Z /C661: More than 102 dB More than 98 dB CDP-CE505/C450Z: Less than 0.0035% CDP-CE405/CE305/C350Z/C250Z /C661: Less than 0.0045% More than 100 dB Jack Maximum Load type output impedance level LINE OUT Phono 2 V Over 10 kilohms jacks (at 50 kilohms) DIGITAL OUT Optical –18dBm Wave length: 660nm (OPTICAL) output (CDP-CE505/ connector C450Z only) PHONES Stereo 32 ohms 10 mW (CDP-CE505/ phone jack C450Z only) Power consumption 14 W Dimensions...
Dieses Handbuch ist für folgende Modelle:CD-Player - CDP-C250Z (567.84 kb)
CD-Player - CDP-C350Z (567.84 kb)
CD-Player - CDP-C450Z (567.84 kb)
CD-Player - CDP-C661 (567.84 kb)