Stimmen - 2, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Black & Decker Dateigröße: 831.64 kb Dateiname: h7669_m.pdf Unterrichtssprache:

it may also be used to alert against unsafe practices. indicates a potentially hazardous situation which, if not avoided, could result in death or serious injury. this symbol is used to alert the user to useful infor- mation about proper operation of the equipment. for your own safety read instruction manual before operating this equipment the purpose of safety symbols is to attract your attention to possible hazard- ous conditions. this manual uses a series of symbols and signal words which are intended to convey the level of importance of the safety messages. the progression of symbols is described below. remember that safety messages by themselves do not eliminate danger and are not a substitute for proper accident prevention measures. NOTICE indicates an imminently hazardous situation which, if not avoided, Will result in death or serious injury. safety instructions for pneumatic tools 1. Keep all safety devices in 5. Keep children and visitors place and in working order. aWay. all children and visitors 2. remove adJusting Keys and should be kept at a safe distance Wrenches. Form habit of check- from work area. ing to see that keys and adjusting 6. maKe WorKshop child wrenches are removed from tool proof by locking your shop and before operation. shutting off air valves. 3. Keep WorK area clean. 7. do not force tool. it will do Cluttered areas and benches invite the job better and safer at the rate accidents. for which it was designed. 4. do not use in dangerous 8. use the right tool. do not environment. do not use pneu-force tool or attachment to do a job matic tools in damp or wet loca-for which it was not designed. tions, or where any flammable or 9. do not use under the noxious fumes may exist. Keep influence of drugs or work area well lighted. alcohol. -4- model h7669 hvlp spray gun safety instructions for pneumatic tools 10. use proper air hose for the 18. disconnect tools before sertool. Make sure your air hose is in vicing and changing accessories. good condition and is long enough to 19. use the recommended reach your work without stretching. accessories. Consult the 11. Wear proper apparel. do not owner’s manual for recommended wear loose clothing, gloves, neck-accessories. the use of improper ties, rings, bracelets, or other jew-accessories may cause risk of injuelry which may get caught in moving ry. parts. non-slip footwear is recom-20. checK damaged parts. mended. Wear a protective hair cov-Before further use of the tool, a ering to contain long hair. guard or other part that is dam 12. alWays use safety glasses. aged should be carefully checked also use a face or dust mask if cut-to determine that it will operate ting operation is dusty. Everyday properly and perform its intended eyeglasses only have impact resis-function. Check for alignment of tant lenses, they are not safety moving parts, binding of moving glasses. parts, breakage of parts, mount13. Wear approved hearing ing, and any other conditions that protection. may affect its operation. a guard or other part that is damaged should 14. secure WorK. use clamps or a be properly repaired or replaced. vise to hold work when practical. it is safer than using your hand and frees 21. never leave unattended both hands to operate tool. tool connected to air. disconnect the air hose and do not 15. do not overreach. Keep prop- leave tool until it is relieved of any er footing and balance at all times. built up pressure. 16. maintain tools With care. 22. never alloW untrained Keep tools lubricated and clean users to use this tool for best and safest performance. While unsupervised. Follow instructions for lubricating a...

Herunterladen

Geben Sie zwei Ziffern: