Login:
Sortierung : Dateiname ↑   heruntergeladen   Bewertung   Dateigröße ↑  
heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name

15th Street Aiken, SC 29803 903-454-1877 Tacoma, WA 98408 701-225-0766 Ted’s Saw Service Tulsa, OK 74104 918-744-1305 803-649-6313 Todd’s Electric Motor Repair Home Appliance Services 1909 Reese Street 253-474-7403 WEST VIRGINIA (WV) 901 South 12th Street OREGON (OR) 110 Laurel Street Liberty, TX 77575 Beckley Mower Service Grand Forks, ND 58201 Turner’s Lawnmower and Saw Conway, SC 29526 409-336-8615 3695 Robert C. Byrd Drive 701-775-7343 Craig’s Small Engine Repair 508 East 2nd Street 728 SE R

heruntergeladen wurde: 0   Dateigröße: 617 kb   Hersteller: Desa  
Kategorie: Kettensägen
@name

If so, contact DESA International’s Technical Service Department at 1-800-323-5190. You can also visit DESA International’s Technical Service web site at Tighten oil cap. Note: Empty oil tank when not in use SERVICE PUBLICATIONS You can buy a service manual from address listed on back page of this manual. Send a check for $5.00 payable to DESA International. You can receive an illustrated parts list free of charge. Send a self-addressed stamped envelope to address on back page of this manual. Wh

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name

Unplug chain saw from power source • when not in use • before moving from one place to another • before servicing • before changing accessories or attachments 2. Inspect chain saw before and after each use. Check saw closely if guard or other part has been damaged. Check for any damage that may affect operator safety or operation of saw. Check for alignment or binding of moving parts. Check that switch turns motor on and off. Check chain brake. Check for broken or damaged parts. Do not use chain

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name

IMPORTANT:Tighten guide bar nuts finger tight only. Make sure adjusting block is in oval adjusting hole on guide bar. 6. Place chain around drive sprocket, then along top groove of guide bar and around guide bar nose. Note:Make sure cutting edges of chain are facing the right direction. Position chain so cutting edges on top of guide bar face guide bar nose (see Figure 3). !WARNING ICON G 001 CAUTION Do not place chain on saw backwards. If chain is backwards, saw will vibrate badly and will not

heruntergeladen wurde: 0   Dateigröße: 1013 kb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name@name

4. Make fourth cut directly above third cut. Cut down to meet third cut. This will remove limb stub. CLEANING AND MAINTENANCE NOTICE: Below are instructions for servicing your chain saw.Any servicing not mentioned below should be done by an authorized service center. CLEANING SAW BODY WARNING: Unplug chain saw from powersourcebeforeservicing.Severeinjury or death could occur from electrical shock or body contact with moving chain. WARNING: Cutting edges on chain are sharp. Use protective gloves

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name

High Street Millville, NJ 08332 856-825-8294 NORTH CAROLINA (NC) Harnett & Wake Sales & Service 44 N. Broad Street Angier, NC 27501 8611 Rt. US 60 8614 Church Lane Corinth, MS 38834 Richard’s Sharpening Service 919-331-0463 Ashland, KY 41102 606-928-4932 Randalstown, MD 21133 410-655-0801 662-287-2460 824 Mill Road Northfield, NJ 08225 609-641-9481 Leonard Electric Motor Repair, Inc. 531 N. Fayetteville St. Asheboro, NC 27203 336-625-2375 107990 21 For more information, visit ® ® ELECTRIC CHAIN

heruntergeladen wurde: 2   Dateigröße: 4 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name@name

Gently pull loop against cord hitch until slack is removed. Plug extension cord into chain saw cord. Power CordExtension CordCord Hitch CUTTING WITH THE CHAIN SAW 1. Connect saw to extension cord. Connect extension cord to power supply. 2. Make sure section of log to be cut is not laying on ground. This will keep chain from touching ground as it cuts through log. Touching ground with moving chain will dull chain. 3. Use both hands to grip saw. Always use left hand to grip front handle and right

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name@name

This cut will keep section from splintering when cut. 2. Make second cut on underside of log, directly under first cut. Use top of guide bar to make this cut. Cut up to meet first cut. This will keep log from pinching guide bar and chain. TRIMMING A TREE (PRUNING) WARNING: Avoid kickback. Kick- back can result in severe injury or death. See Kickback, page 3, to avoid risk of kickback. WARNING: • If on slope, make sure log will not roll down hill. Secure log by using wooden stakes. Drive wooden s

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Desa  
Kategorie: Kettensägen
@name@name@name

4. Remove burrs from sides of guide bar. Use flat file to make side edges square. Replace guide bar when • bar is bent or cracked • inside groove of bar is badly worn Note: When replacing guide bar, see Replacement Parts and Accessories, page 21, for proper bar. SHARPENING SAW CHAIN WARNING: Unplug chain saw from power source before servicing. Severe injury or death could occur from electrical shock or body contact with moving chain. WARNING: Cutting edges on chain are sharp. Use protective glov

heruntergeladen wurde: 1   Dateigröße: 617 kb   Hersteller: Desa  
Kategorie: Kettensägen
@name

Main Street Chicago Heights, IL 60411 708-756-2280 Lange Electric 912 E. Fayette Effingham, IL 62401 217-347-7626 H & R Pump Company, Inc. 2111 E. Washington Street Joliet, IL 60434 815-726-2950 Mathis-Kelley Construction 1046 W. Jefferson Street Morton, IL 61550 309-266-9733 Ambraw Power Equipment 310 E. Decatur Street Newton, IL 62448 618-783-2821 16 105419 OWNER’S MANUAL INDIANA (IN) KANSAS (KS) MARYLAND (MD) Fowler's Farm City Sales MONTANA (MT) Hutchens Sales and Service Abilene Rent-All &





Kategorien