3 2 1 1 Juego de la bomba 69004-001 69005-001 1 2 Juego del sello del eje 21009-001 21009-001 1 3 Juego del motor 69000-001 69001-001 1 4 Tapa del cuerpo de la bomba 28563-001 28564-001 1 5 Cesta filtrante (no se muestra) 28565-001 28566-001 1 No. de Ref. Descripcion WIP100PRO WIP150PRO Ctd. 4 Notas 2 15 Sp Operating Instructions and Parts Manual Installation (Continued) NOTE: Use an adhesive primer to ensure adhesive joints are secure. Suregard P-3000 has a purple tracer to qualify in areas whe

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Manual de Instrucciones de Operacion y Piezas Bombas para piscinas enterradas GARANTIA LIMITADA Durante 1 (uno) ano a partir de la fecha de compra, Wayne Water Systems, cuyo nombre comercial es Aqua Pro Systems (“AquaPro”), reparara o reemplazara para el comprador original, segun lo que decida, cualq

Note: It may take up to three days to reach the desired temperature during the opening of the swimming season. Without a pool blanket, it may take even longer and may not reach the desired temperature until later in the season. Weather Conditions Weather conditions play a big part in the operation of the heater. Low outside ambient temperature, high winds, low relative humidity, and a large amount of shading on the pool will all have an effect on how much time it takes to heat the pool and how m

Protect yourself and others by observing all safety information. Failure to comply with instructions could result in personal injury and/or property damage! Retain instructions for future reference. Contents Important Safety Instructions . . . . . . .2 Pool Chemistry and Warranty . . . . . . .2 Installation Procedures . . . . . . . . . . . .3 Unit Inspection . . . . . . . . . . . . . . . .3 Unit Location . . . . . . . . . . . . . . . . . .3 Plumbing . . . . . . . . . . . . . . . . . . . . .3 Bas

The range of hours is “off” to 2, 3, 4,… up to 23 hours to “on”. As described before, the run time will then be calculated and spread out over the 6 time periods for 24 hours. Selecting the “on” position will run the pump and filter system continuously. The unit leaves the factory with the “FIL” mode set to “OFF”. Time Clock Override (TCO) Operation All wiring and electrical connections must be performed by a qualified electrician. Installation must be in accordance with local and national codes

Controls Toggling Between Heating and Cooling Mode The unit will default to the heating mode. If the cooling mode is desired, press the SET button until the H-C screen is displayed. Then press the arrow buttons until “COL” is displayed on the screen. This puts the unit into cooling mode. The water temperature set point will now be the water temperature that the unit is cooling the water to. When the unit is in cooling mode, the screen will flash between the current water temperature and “COL” to