Login:
heruntergeladen wurde: 2   Dateigröße: 6 mb   Hersteller: Rheem  
Kategorie: Schwimmbecken
@name

If installing three collectors, remove tiles for third collector strap. 4. Slide the Collector Extrusion on to the Collector Straps. After leveling, raise the hot pipe side of the extrusion by 1/2” per collector to ensure correct operation of the system (eg. For a 2 collector system, raise the hot pipe side of the extrusion by 1”). 6. Attach straps onto rafters or trusses with 5/16” x 6" lag screws. 7. Replace tiles that have previously been removed. 8. Flash and seal all roof penetrations. 9. C

heruntergeladen wurde: 8   Dateigröße: 6 mb   Hersteller: Rheem  
Kategorie: Schwimmbecken
@name

This manual also includes a parts list. It is very important that all persons who are expected to install, operate or adjust this water heater read the instructions carefully so they may understand how to perform these operations. If you do not understand these instructions or any terms within it, seek professional advice. Any questions regarding the operation, maintenance, service or warranty of this water heater should be directed to the seller from whom it was purchased. If additional informa





Kategorien