Login:
heruntergeladen wurde: 4   Dateigröße: 1 mb   Hersteller: Wayne  
Kategorie: Safety Gate
@name

Step 4: Positioning the Motor End of Operator CAUTION: To prevent damage to steel, aluminum, fiberglass or glass panel doors do not rest the opener of the door without using a 2” x 4” at least 12” long. Raise the motor end of the opener and support it so you can open the door to its fully open position. You may need help raising motor end if ladder is not high enough. Open the door and place a 2” x 4” piece of wood along the top section of the garage door. Rest the double rails on the 2” x 4”, a

heruntergeladen wurde: 1   Dateigröße: 1 mb   Hersteller: Wayne  
Kategorie: Safety Gate
@name

THIS MANAUL SHOULD BE ATTACHED IN CLOSE PROXIMITY TO THE GARAGE DOOR OPENER. DOOR AND OPENER WILL NOT OPERATE PROPERLY UNTIL INFRARED SAFETY SENSORS ARE INSTALLED AND PROPERLY ADJUSTED! DO NOT OPERATE DOOR OPENER UNTIL FULLY INSTALLED, ADJUSTED & INSTRUCTED TO DO SO! © Copyright 2003 Wayne-Dalton Corp. Part No: 307532 Rev3 10/15/03 Read These Important Safety Rules Before Proceeding This symbol indicates caution and appears throughout this instruction manual. This garage door opener is designed

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Wayne  
Kategorie: Safety Gate
@name

IMPORTANT: You MUST change the Transmitter security code prior to programming the device to the power head unit. WARNING: During programming the garage door may operate. Keep people and objects clear of the moving door to prevent door damage or possible personal injury. Changing the Transmitter Code 1. Press and hold the button on the transmitter that you want to change (left button or right button). The GREEN LED (light) will flash once and then turn off. 2. Continue to hold the button until th

heruntergeladen wurde: 0   Dateigröße: 1 mb   Hersteller: Wayne  
Kategorie: Safety Gate
@name

Pressing the PET LOCK button while the door is in the pet position will cause the door to close. Pressing the UP/DOWN button while the door is in the pet position will cause the door to open. NOTE: a door in the pet position is not locked and should not be used as a secured door position. 5. The wall station PROGRAM button has several functions. a. It can be used to set a custom pet position. (see below) b. It can be used to set the opener’s closing force (See Adjustment #1 Page 27). To set a cu





Kategorien