Stimmen - 6, Durchschnittliche Bewertung: 4 ( )

Hersteller: Sony Dateigröße: 1.78 mb Dateiname: Unterrichtssprache:

(See "Changing the sound and display settings" on page 22.) Automatically scrolling a disc name — Auto Scroll If the disc name, artist name, or track name on a CD TEXT disc or MD exceeds 8 characters and the Auto Scroll function is on, information automatically scrolls across the display as follows: • The disc name appears when the disc has changed (if the disc name is selected). • The track name appears when the track has changed (if the track name is selected). If you press (dspl/pty) to change the display item, the disc or track name of the MD or CD TEXT disc is scrolled automatically whether you set the function on or off. 1 During playback, press (menu). 2 Press either side of (prst/disc) or (prst) repeatedly until "A.SCRL" appears. 3 Press (+) side of (seek/ams) to select "A.SCRL-ON." 4 Press (ENTER). To cancel Auto Scroll, select “A.SCRL-OFF” in step 3. Note For some discs with very many characters, the following cases may happen: — Some of the characters are not displayed — Auto Scroll does not work. 24 Locating a specific track — Automatic Music Sensor (AMS) During playback, press either side of (seek/ams) momentarily for each track you want to skip. To locate succeeding tracks To locate V; preceding tracks I01»-// Locating a specific point in a track — Manual Search During playback, press and hold either side of (seek/ams). Release when you have found the desired point. To search ~ backward ^ To search forward Switching to other discs During playback, press either side of (PRST/DISC) or (PRST). The desired disc in the current unit begins playback. For succeeding discs For preceding discs Elapsed playback time EH 1 \ PI 171 /r* til- E3 Track number Disc number Playing tracks repeatedly — Repeat Play You can select: • REP-1 - to repeat a track. • REP-2 - to repeat a disc. During playback, press CD (REP) repeatedly until the desired setting appears. -B REP-1-B REP-2- Repeat Play starts. To return to normal playback mode, select “REP-OFF.” Playing tracks in random order — Shuffle Play You can select: • SHUF-1 - to play the tracks on the current disc in random order. • SHUF-2 - to play the tracks in the current unit in random order. • SHUF-ALL* - to play all the tracks in all the units in random order. During playback, press (2) (SHUF) repeatedly until the desired setting appears. |-B SHUF-1 -B SHUF-2 — S - SHUF-ALL* b -SHUF-OFF b- Shuffle Play starts. * "SHUF-ALL " is only available when you connect two or more optinal CD/MD units. To return to normal playback mode, select “SHUF-OFF.” 25 Additional Information Maintenance Fuse replacement When replacing the fuse, be sure to use one matching the amperage rating stated on the original fuse. If the fuse blows, check the power connection and replace the fuse. If the fuse blows again after replacement, there may be an internal malfunction. In such a case, consult your nearest Sony dealer. Warning Never use a fuse with an amperage rating exceeding the one supplied with the unit as this could damage the unit. Cleaning the connectors The unit may not function properly if the connectors between the unit and the front panel are not clean. In order to prevent this, open the front panel by pressing (OPEN), then detach it and clean the connectors with a cotton swab dipped in alcohol. Do not apply too much force. Otherwise, the connectors may be damaged. Back of the front panel Notes • For safety, turn off the engine before cleaning the connectors and remove the key from the ignition switch. • Never touch the connectors directly with your fingers or with any metal device. 26 Dismounting the unit 1 Press the clip inside the front cover with a thin screwdriver, and pry the front cover free. 2 Repeat step 1 on the left side. The front cover is removed. 3 Use a thin screwdriver to push in the clip on the left side of the unit, then pull out the left side of the unit until the catch clears the mounting. 5 Slide the unit out of the mounting. 27 Specifications Cassette player section General Tape track Wow and flutter Frequency response Signal-to-noise ratio 4-track 2-channel stereo 0.08 % (WRMS) 30 - 18,000 Hz Cassette type TYPE II, IV*1 61 dB TYPE I 58 dB Tuner section FM Tuning range Aerial terminal Intermediate frequency Usable sensitivity Selectivity Signal-to-noise ratio 87.5 - 108.0 MHz External aerial connector 10.7 MHz/450kHz 8 dBf 75 dB at 400 kHz 66 dB (stereo), 72 dB (mono) Harmonic distortion at 1 kHz 0.6 % (stereo), 0.3 % (mono) Separation 35 dB at 1 kHz Frequency response 30 - 15,000 Hz MW/LW Tuning range Aerial terminal Intermediate frequency Sensitivity Outputs Tone controls Power requirements Dimensions Mounting dimensions Mass Supplied accessories Optional accessories Optional equipment MW: 531 - 1,602 kHz LW: 153 - 279 kHz External aerial connector 10.7 MHz/450 kHz MW: 30 ^V LW: 40 ^V Audio output Power aerial relay control lead P...

Herunterladen

Geben Sie zwei Ziffern: