Stimmen - 5, Durchschnittliche Bewertung: 4.8
(
)
)
|
Anleitung Zusammenfassung
Rotate and hold the control to find a specific station. By pushing in and rotating the control (the PRESET/DISC control) Push in and rotate the control to: • Receive the stations memorised on the number buttons. • Change the disc. Other operations Rotate the VOL control to Press (off) to turn off the unit. Note When installing in a car without ACC (accessory) position on the ignition key switch, press (off) for two seconds to turn off the clock display after turning off the engine. 20 Press (dspl) to change the displayed items. TiP While the ATA function is activated, the display (TAPE TUNER) can be changed by pressing (DSPL). Changing the operative direction The operative direction of controls is factory-set as shown below. To increase To decrease Adjusting the sound characteristics You can adjust the bass, treble, balance, and fader. You can store the bass and treble levels independently for each source. 1 Select the item you want to adjust by pressing (sound) repeatedly. Each time you press (SOUND), the item changes as follows: BAS (bass) t TRE (treble) t BAL (left-right) t FAD (front-rear) 2 Adjust the selected item by pressing either side of (seek/ams). When adjusting with the rotary commander, press (SOUND) and rotate the VOL control. Note Adjust within three seconds after selecting the item. If you need to mount the rotary commander on the right hand side of the steering column, you can reverse the operative direction. Press (sound) for two seconds while pushing the VOL control. TiP You can also change the operative direction of these controls with the unit (see "Changing the sound and display settings " on page 22). Attenuating the sound Press (att) on the rotary commander or card remote commander. “ATT-ON” flashes momentarily. To restore the previous volume level, press (ATT) again. TiP When the interface cable of a car telephone is connected to the ATT lead, the unit decreases the volume automatically when a telephone call comes in (Telephone ATT function). (XR-C5300RX/C5300RV/C5300R/4300RX/4300RV/ 4300R only) 21 Changing the sound and display settings The following items can be set: • CLOCK (page 9). • CT (Clock Time) (page 19). • BEEP - to turn the beep sound on or off. • RM (Rotary Commander) - to change the operative direction of the rotary commander. — Select “NORM” to use the rotary commander as the factory-set position. — Select “REV” when you mount the rotary commander on the right side of the steering column. • D.INFO (Dual Information)*1 - to display the clock and the play mode simultaneously (ON), or to display the information alternately (OFF). • AMBER/gReeN*2 - to change the illumination colour to amber or green. • DIMMER*3 - to change the brightness of the display. — Select “ON” to dim the display. — Select “OFF” to deactivate Dimmer. • M.DSPL (Motion Display) - to turn the motion display on or off. • A.SCRL (Auto Scroll)*4 (page 24). 1 Press (MENU). 2 Press either side of (prst/disc) or (prst) repeatedly until the desired item appears. Each time you press (-) side of (PRST/DISC) or (PRST), the item changes as follows: CLOCK t CT t BEEP t RM t D.INFO*1 t AMBER/GREEN*2 t DIMMER*3 t M.DSPL t A.SCRL*4 *1 When the radio is off, or when no tape, CD, or MD is playing, this item will not appear. *2 XR-C5300R/C5200R/4300R/4200R only *3 XR-C5300RV/4300RV only *4 When no CD or MD is playing, this item will not appear (XR-C5300RX/C5300RV/C5300R/ C5200R only). Note The displayed item will differ depending on the source. TiP You can easily switch among categories (‘SET’, “DIS”and “P/M”) by pressing an holding either side of (prst/disc) or (prst) for two seconds. 3 Press (+) side of (seek/ams) to select the desired setting (Example: ON or OFF). 4 Press (ENTER). After the mode setting is complete, the display returns to normal playback mode. 22 Boosting the bass sound — D-bass You can enjoy a clear and powerful bass sound. The D-bass function boosts the low frequency signal and high frequency signal with a sharper curve than conventional bass boost. You can hear the bass line more clearly even while the vocal volume remains the same. You can emphasize and adjust the bass sound easily with the D-BASS button. Adjusting the bass curve Press (d-bass) repeatedly to select the desired bass curve. As the D-BASS number increases so does the effect. D.BASS-1 t D.BASS-2 t D.BASS-3 t D.BASS-OFF (cancel) Note The bass sound may distort at same volume. If the bass sound distorts, select less effective bass curve. With Optional Equipment CD/MD Unit (XR-C5300RX/ C5300RV/C5300R/C5200R only) This unit can control external CD/MD units. If you connect an optional CD unit with the CD TEXT function, the CD TEXT information will appear in the display when you play a CD TEXT disc. Playing a CD or MD 1 Press (source) repeatedly to select CD or MD. 2 Press (mode) until the desired unit appears. CD/MD playback starts. When a CD/MD unit is ...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - XR-4300R (1.78 mb)
Car-Receiver - XR-4300RV (1.78 mb)
Car-Receiver - XR-4300RX (1.78 mb)
Car-Receiver - XR-C5200R (1.78 mb)