Stimmen - 2, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
If the reception quality of the selected becomes too bad: • Tune into another station. REG - regional programme Certain radio programmes are split up at times into regional programmes offering local information. The 1st programme broadcast by NDR, for example, offers programmes with different contents in the northern states of Germany Schleswig-Holstein, Hamburg and Lower Saxony at certain times of the day. If you have tuned to a regional programme, you can select between REG ON and REG OFF: REG ON – the radio keeps tuned to the current regional programme, even if the reception quality is getting poorer. REG OFF – the radio automatically tunes to the regional programme offering the best reception quality (but maybe with local information for another service area). You can select DSC menu. For chapter “DSC programming OFF”. Selecting a waveband (only Verona RCR127) You can select between the following FM 87.5 - 108 MHz MW 531 - 1602 kHz LW 153 - 279 kHz • Press TS/BND until the desired waveband shows on the display panel. Notice: In the DSC menu you can deactivate the station selection on either MW or LW or for both wavebands at the same time. This has the advantage that only the required bands will allow to be activated, so that you must press the TS/BND button less often. For more information, please refer to chapter “DSC programming - AM ON/AM OFF”. ENGLISH 27 Station tuning Automatic tuning / • Press / ; the car radio will automatically search for the next When keeping the upper or / of the rocker switch depressed, will speed up in upwards or downwards Seek tuning Up Down << / >> Up/Down in short intervals (FM only, “AF” must be switched off) Manual tuning with << >> You can also tune in a station manually. Condition: AF must be switched off (i.e. the symbol does not light up in the display). If necessary, deactivate AF: • Press AF/TA for about 1 second. Manual tuning: • Press << >>. The change in short intervals or upwards direction. When holding the right or switch depressed, the frequency speeded up. Scrolling through the broadcasting networks You can use the << >> buttons to tune in stations of your reception area. If several programmes of the broadcasting networks can be received, you can scroll through them in forwards direction pressing >>, or backwards using the << button, e.g. NDR 1, 2, 3, 4, N-JOY, FFN, ANTENNE .. . For this it is necessary that the stations have been tuned in at least once and that “AF” is active (lights up in the display) . For this purpose, start automatic tuning, e.g. using Travelstore: • Press TS/FM or TS/BND for 1 sec.; the system starts to run through the frequency band. The display shows “TSTORE”. If “AF” does not light up, • press AF/TA for approximately 1 sec. This fulfils the requirements for selecting stations with << >>. Changing You can shift between II and T in order to store them later. The currently selected memory in the display. • Press the TS/FM or TS/BND button as many times until the desired memory bank lights up in the display. Storing stations On FM, you can store five stations on the preset buttons 1, 2, 3, 4, 5 for each of the memory banks I, II and T. On MW/LW, you can also store five stations each (only with Verona RCR 127). • Select the desired memory bank. • Tune in a station with the rocker switch (either automatically or manually). • Press and hold down the desired preset button until the radio resumes play after the muting (takes approximately 1 sec., confirmed by beep). Now the station has been stored. The activated preset button is indicated in the display. Notice: Should you tune been stored preset position the display. Automatically storing the strongest stations with Travel-store You can automatically store the five most powerful FM stations of your current reception area sorted according to their signal strength. This function is particularly convenient on longer trips. • Press the TS/FM or TS/BND button for 1 sec. “T-STORE” will appear in the display. The five strongest FM stations will be automatically stored on the memory bank “T” (Travelstore). When this process has been completed, the radio will play the first station stored on preset 1. If desired, stations can also be stored manually on the Travelstore bank (see “Storing stations”). Recalling You can recall any of a button. • Select the memory bank TS/FM or TS/BND. • Press the corresponding preset briefly to recall the station. Scanning stored stations with Preset Scan You can have all of the stored stations briefly scanned. To start Preset Scan: • Press SCA/SRC for approximately 1 sec. until “SCAN” appears in the display. All of the stored stations to be received in the selected waveband will be scanned one after the other. On FM, the radio will either scan the stations stored on memory bank I and II or T. To select a scanned station and switch off Preset Scan: • Press SCA/SRC for about 1 second. Note: If “TA” shows on the display panel, the system will scan the stored traffic stat...
Dieses Handbuch ist für folgende Modelle:Car-Receiver - AUGSBURG RCR 127 (127.19 kb)