With the child seat fully reclined, open the belt shield at the back of the seat shell. Pull the yoke out from behind the seat and unhook one shoulder strap (dia 1d). Pull the cover from the top of the seat so that you can see the slots in the seat shell. Pull the shoulder strap through to the front of the seat. Handy tip – An alternative recline position may make the next step easier. Turn the chest pad tab sideways (dia 1e) and ease it through to the front of the seat . Then thread both straps

Doing so could cause the child seat not to perform as intended. Forward-Facing Installation Forward-Facing Installation 1 Loosen the harness. a Lift harness adjuster lever b Pull both harness straps forward 2 Remove the body pillow and unbuckle the harness. 3 Pull the head restraint cover up, then pull the seat cover forward to access the forward-facing belt path. 4 Route the vehicle seat belt through the forward-facing belt slots, then buckle. Ensure the vehicle belt is not twisted. 5 Push the

Certification............................................................................ Registration............................................................................ Weight Range/Maximum Height............................................ Installation: Aircraft............................................................................... Features Front View.............................................................................. Rear View........................................

We recommend that you retain your receipt and attach it to this user guide. They should be kept in a safe place. Britax does not accept liability for damage arising from abuse, misuse or negligence. This guarantee is not transferable and therefore does not apply to second-hand products. Your statutory rights are not affected by this guarantee. If in doubt ............................................................ For advice as to the suitability of this restraint for your car please use on our

33IMPORTANT: • The harness buckle strap should lie toward the back of the child seat during installation. • The buckle should be in the inner slot for rear-facing installation. 34 1 Loosen the harness. a Lift harness adjuster lever b Pull both harness straps forward 2 Remove the body pillow, unbuckle the harness, and remove the belly pad. 3 Pull the head restraint cover up, then pull the seat cover forward while pulling the buckle through to access the rear-facing belt path. IMPORTANT: Ensure bu

. . . . . . . WARNINGS . . . . . . . . . . . . Important Notes. . . . . . . . . . . . . . Certification . . . . . . . . . . . . . . . . . Registration . . . . . . . . . . . . . . . . . . . Vehicle Safety Belts . . . . . . . . . . . . . . . . . . . . Vehicle Seating Positions . . . . . . . . . . . . . . . . . . . . . . Features. . . . . . . . . . . . . . . . . . . . . . . . Securing the Child . . . . . . . . . . . . . . . . . . . . . . . . . . . Installation . . . . . . . . . . . . . . . . . . .

Your statutory rights are not affected by this guarantee. Britax Excelsior Limited 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom A Britax Childcare company Customer Service Helpline: 01264 386034 Email: helpline@uk.britaxeurope.com Switchboard: 01264 333343 Fax: 01264 334146 Britax, whilst taking into account child car seat contact with vehicle seats throughout the development of new products, cannot accept responsibility for damage occurring to vehicle seats or seat belts. IMPO

8 Vehicle Compatibility Incompatible Vehicle Seat Belts...................................................................................10 Vehicle Buckle Positions...............................................................................................11 Vehicle Seating Positions..............................................................................................11 Installation: Rear-Facing LATCH Installation.......................................................................

Colors and styles may vary. MADE IN CHINA. Please retain information for future reference. 11/05

E). • If your vehicle is equipped with an automatic locking retractor (ALR), use of lock-offs is not required as long as ALR is activated. Check your vehicle’s owner’s manual to determine type of retractor your vehicle has, and for proper use of retractor. 8Verify all connections are secure and restraint is stable. The restraint is secure when it cannot be moved front-to-back or side-toside more than 1” (2.5 cm.) at belt path. If restraint is not secure, repeat procedure or use an alternate seat