Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
Your statutory rights are not affected by this guarantee. Britax Excelsior Limited 1 Churchill Way West Andover Hampshire SP10 3UW United Kingdom A Britax Childcare company Customer Service Helpline: 01264 386034 Email: helpline@uk.britaxeurope.com Switchboard: 01264 333343 Fax: 01264 334146 Britax, whilst taking into account child car seat contact with vehicle seats throughout the development of new products, cannot accept responsibility for damage occurring to vehicle seats or seat belts. IMPORTANT – The child seat MUST only be used with a lap and diagonal seat belt (approved to UN/ECE Regulation no. 16 or other equivalent standards). Introducing your new child car seat Diagonal Lap Sliding headrest Backrest Lower belt guides (red) Pull-out cup holder User Guide storage slot (under cover) Booster section UK User Guide 1a 1b 1c 1d 2a 2b 2c 2d 2e 3a 3b 1e 2f 2g 2h 1 Adjusting the child seat IMPORTANT – You must check that the headrest is in the correct position for your child before each journey. With the seat supported, squeeze the headrest adjuster at the back of the headrest (dia 1a). Move the headrest up or down so that the head is positioned centrally as in the picture (dia 1b). When the headrest is in the correct position let go of the headrest adjuster and ensure it has locked into place. To adjust the backrest, place one hand on the seat section and push firmly on the backrest until you feel and hear a click (dia 1c). The backrest will now pivot freely and does not need to click into another position. Push the child seat back until it is touching the car’s seat back (dia 1d). The cars seat backrest can be moved to a desired angle. IMPORTANT – The backrest of the child seat MUST always be in contact with the cars seat back AND the base section of the child seat MUST always be in contact with the car’s seat base. If one or both sections of the child seat are not in contact with both sections of the car’s seat you MUST angle the car seat more upright (dia 1e). IMPORTANT – Have you adjusted the headrest to the correct position for your child and ensured that the seat has an appropriate recline angle? IMPORTANT – You MUST NOT use the child seat for a child weighing more than 36kg. Place the child seat forward facing in your car, ensuring it is pushed firmly into the car seat. Feed the diagonal section of the seat belt through the dark red upper belt guide on the OPPOSITE side to the buckle (dia 2a). IMPORTANT – When installing the child seat, the vehicle seat must be kept in a normal upright position at all times. Reclining the vehicle seat will adversely affect the performance of the seat in a crash. Fasten the seat belt across your child. The lap section of the seat belt should rest on the red lower belt guides on each side of the child seat (dia 2b). IMPORTANT – The lap section of the seat belt should rest as forward and as low as possible over your child’s pelvis. Remove as much slack as possible from the seat belt and make sure it is fitted comfortably, but tightly and is not twisted (dia 2c). IMPORTANT – You must use the upper belt guide at all times. IMPORTANT – Ensure that the diagonal section of the belt lays over the shoulder of the child and NOT against the neck. Tighten the seat belt by pulling the diagonal section in the direction of the arrow (dia 2d). If your vehicle has an adjustable seat belt upper anchorage, adjust its height so that the seat belt passes through the centre of the upper belt guide on the child seat and pull the seat belt to tighten . IMPORTANT – The child seat must not be installed in a position where the seat belt anchorage point is level with, or forward of, the upper belt guide (dia 2e). Correct buckle position IMPORTANT – Once you have installed the child seat it is important that you check the position of the seat belt buckle to ensure a secure installation. If the seat belt buckle looks like this then the seat belt buckle position is correct (dia 2f). If the seat belt buckle looks like this, where the buckle is being pulled around the shell into the red lower belt guide (dia 2g), try another seating position in the car. IMPORTANT – Do not leave your child seat loose. Always fasten the seat belt across the child seat when it is not being used by your child to prevent the seat being hurled forward in the event of an accident. If the seat belt does not lie within the red lower belt guides then the seat is not properly installed (dia 2h). If you are in any doubt contact Customer Services on 01264 386034. To release your child simply undo the seat belt. 3 Looking after the child seat Removing the cover Unhook the elastics which hold the main cover section in place (dia 3a). The red spots show their location. Unhook the elastic from the hook at the front of the seat (dia 3b). Unhook the elastics which hold the headrest cover section in place (dia 3c). The red spots show their location. The edges of the headrest cover section can now be pulled away from t...