Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Dieses Gerät hat auch andere Anweisungen:
Anleitung Zusammenfassung
Specifi cations
g AMPLIFIER SECTION
g CD SECTION
Note
FTC output power, both channels driven
Discs played
1. Specifi cations are subject to change
10% Total harmonic distortion
12- and 8-cm CDs (including CD-R/RW)
without notice.
60 Hz to 3 kHz
recorded with CD-DA, MP3, WMA, and
Mass and dimensions are approximate.
(Low channel)
26 W per channel (6 Ω)
HighMAT
3 kHz to 16 kHz
2. Total harmonic distortion is measured by
Sampling frequency
the digital spectrum analyzer.
(High channel)
29 W per channel (6 Ω)
CD
44.1 kHz
Total Bi-Amp power
55 W per channel
3. The labels “HIGH (HF)” and “LOW (LF)”
MP3/WMA
32 kHz, 44.1 kHz, 48 kHz
RMS output power, both channels driven
on the rear of the speakers refer to High
Bit rate
MP3: 32 kbps to 320 kbps
10% Total harmonic distortion
frequency and Low frequency.
Decoding
16 bit linear
1 kHz (Low channel)
Pickup
35 W per channel (6 Ω)
Beam source
Semiconductor laser
When moving the
8 kHz (High channel)
Wavelength
780 nm
35 W per channel (6 Ω)
Number of channels
Stereo
unit
Total Bi-Amp power
70 W per channel
Frequency response
Output Impedance
1. Remove all discs.
20 Hz to 20 kHz (+1, -2 dB)
HEADPHONE
16 to 32 Ω
Wow and fl utter
Below measurable limit
2. Press [8, POWER] to turn
Digital fi lter
8 fs
g FM TUNER SECTION
the unit off.
D/A converter
MASH (1 bit DAC)
Frequency range
3. Disconnect the AC power
87.5 to 108.0 MHz (0.1 MHz steps)
g SPEAKER SECTION
supply cord.
87.9 to 107.9 MHz (0.2 MHz steps)
Type
2 way 2 speaker system
Sensitivity
1.5 µV (IHF)
Speaker(s)
S/N 26 dB
1.5 µV
Full range
10 cm (4")
Maintenance
Antenna terminal
75 Ω (unbalanced)
Tweeter
6 cm (23/8")
Impedance
6 Ω
For a cleaner crisper sound
g AM TUNER SECTION
Input power (IEC)
Clean the heads regularly to assure
Frequency range
520 to 1710 kHz
LOW
70 W (Max.)
Sensitivity
good quality playback and recording.
HIGH
70 W (Max.)
S/N 20 dB (at 1000 kHz)
560 µV/m
Use a cleaning tape (not included).
Sound pressure level
81 dB/W (1.0 m)
Cross over frequency
3.0 kHz
g CASSETTE DECK SECTION
Frequency range 45 Hz - 50 kHz (-16 dB)
To clean this unit, wipe with a soft,
Track system
4-track, 2 -channel
55 Hz - 45 kHz (-10 dB)
dry cloth.
Heads
Record/playback
Dimensions (W
Solid permalloy head
x H x D)
• Never use alcohol, paint thinner or
Erasure
Double gap ferrite head
151 x 250 x 229 mm
benzine to clean this unit.
Motor
DC servo motor
(5
15/16" x 10 7/8" x 9")
• Before using chemically treated
Mass
1.93 kg(4.3 lbs)
Recording system
AC bias 100 kHz
cloth, read the instructions that
Erase system
AC erase 100 kHz
g GENERAL
came with the cloth carefully.
Tape speed
4.8 cm/s
Power supply
AC 120 V, 60 Hz
Overall frequency response
Power consumption
130 W
This product may receive radio interference
(+3 dB, -6 dB at DECK OUT)
Dimensions (W x H x D)
caused by mobile telephones during use.
NORMAL (TYPE I)
35 Hz to 14 kHz
179 x 250 x 383 mm
If such interference is apparent, please
S/N
45 dB (A weighted)
(7
1/16" x 9 27/32" x 15 3/32")
Mass
5.44 kg(11.99 lbs)
increase separation between the product
Wow and fl utter
0.16% (WRMS)
and the mobile telephone.
Fast forward and rewind time
Power consumption in standby mode:
Approx. 120 seconds with
Approx. 0.9 W
C-60 cassette tape
Product Service
1. Damage requiring service - The unit should be serviced by
Product information
Reference
qualifi ed service personnel if:
(a) The AC power supply cord or the plug has been damaged; or
For product information or assistance with product operation:
(b) Objects or liquids have gotten into the unit; or
In the U.S.A., refer to “Customer Services Directory” on page 27.
(c) The unit has been exposed to rain; or
For assistance in the continental U.S.A. in obtaining repairs please
(d) The unit does not operate normally or exhibits a marked
ship the product to:
change in performance; or
Panasonic Services Company - Customer Servicenter
(e) The unit has been dropped or the cabinet damaged.
Suite B 4900 George McVay Drive, MacAllen, TX 78503
2. Servicing - Do not attempt to service the unit beyond that
In Puerto Rico contact the Panasonic Sales Company.
described in these operating instructions. Refer all other
Tel. (787) 750-4300 Fax. (787) 768-2910
servicing to authorized servicing personnel.
When shipping the unit carefully pack and send it prepaid,
3. Replacement parts - When parts need replacing ensure the
adequately in sured and preferably in the original carton. Include a
servicer uses parts specifi ed by the manufacturer or parts that
letter detailing the complaint and provide a day time phone number
have the same characteristics as the original parts. Unauthorized
where you can be reached.
substitutes may result in fi re, electric shock, or other hazards.
IF REPAIR IS NEEDED DURING THE WARRANTY PERIOD
4. Safety check - After repairs or service, ask the servicer to
THE PURCHASER WILL BE REQUIRED TO FURNISH A SALES
perform safety checks to confi rm that the unit is in proper working
RECEIPT/PROOF OF PURCHASE INDICATING DATE OF
condition.
PURCHASE, AMOUNT PAID AND PLACE OF PURCHASE.
CUSTOMER WILL BE CHARGED FOR THE REPAIR OF ANY
The servicer will require all components to service your system.
UNIT RECEIVED WITHOUT SUCH PROOF OF PURCHASE.
Therefore, should service ever be necessary, be sure to bring the
Also, the purchaser will be responsible for shipping the unit to the
entire system.
above address.
RQT7372
In Canada, contact Panasonic Canada Inc. Customer Care Cen tre
at 905-624-5505, or visit website (www.panasonic.ca), or an
26
authorized Servicentre close to you.
...