Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Do not mix batteries (old and new or carbon and alkaline, etc.). • Batteries (batter y pack or batteries installed) shall not be exposed to excessive heat such as sunshine, fire or the like. • Remove batteries when the unit is not used for a long time. • Apparatus shall not be exposed to dripping or splashing. • Do not place any sources of danger on the apparatus (e.g. liquid filled objects, lighted candles). • Where the plug of the Direct Plug-in Adapter is used as the disconnect device, the disconnect device shall remain readily operable. Warning • Never remove the casing of this apparatus. • Never lubricate any par t of this apparatus. • Never place this apparatus on other electrical equipment. • Keep this apparatus away from direct sunlight, naked flames or heat. • Make sure that you always have easy access to the power cord, plug, or adaptor to disconnect the apparatus from the power. 2 EN 2 Your Docking Speaker Congratulations on your purchase, and welcome to Philips! To fully benefit from the suppor t that Philips offers, register your product at Introduction With this docking speaker, you can enjoy audio from your iPod/iPhone or other audio devices. What's in the box Check and identify the contents of your package: • Main unit • 1 x AC adaptor • Shor t user manual Overview of the main unit a b c d e a Dock for iPod/iPhone b / • Adjust volume. c • Turn the unit on or off. • Switch the unit to standby mode. d AUDIO IN • Connect an external audio device. e DC IN • Connect AC power. EN 3 4 EN 3 Get started Always follow the instructions in this chapter in sequence. If you contact Philips, you will be asked for the model and serial number of this apparatus. The model number and serial number are on the bottom of the apparatus. Write the numbers here: Model No. __________________________ Serial No. ___________________________ Connect power This docking speaker can be powered on by either AC power or batteries. Battery power Caution •• Risk of explosion! Keep batteries away from heat, sunshine or fire. Never discard batteries in fire. •• Batteries contain chemical substances, so they should be disposed of properly. •• Danger of explosion if battery is incorrectly replaced. Replace only with the same or equivalent type. 1 Open the battery compartment. 2 Insert 4 x 1.5 V AA batteries (not supplied) with correct polarity (+/-) as indicated. 3 Close the battery compartment. AC power Caution •• Risk of product damage! Make sure that the power supply voltage corresponds to the voltage printed on the back of the unit. •• Risk of electric shock! When you unplug the AC adaptor, always pull the plug from the socket. Never pull the cord. •• Before connecting the AC adaptor, make sure that you have completed all other connections. Turn on Press to turn the docking speaker on. » The / LED indicators light up. Switch to standby mode The docking speaker switches to standby mode in following situations: • Press again; • The speaker is idle for 15 minutes when powered by AC supply. • The iPod/iPhone or external audio device is disconnected when the speaker is operated on batteries. » The / LED indicators light off. EN 5 4 Play Play from iPod/iPhone You can enjoy audio from iPod/iPhone through this docking speaker. Compatible iPod/iPhone The docking speaker suppor ts the following iPod/iPhone models. Made for : • iPhone 5 • iPod nano (7th generation) • iPod touch (5th generation) Load the iPod/iPhone Inser t your iPod/iPhone into the dock. » The docking system switches to Dock source automatically. To remove the iPod/iPhone: • Pull your iPod/iPhone out of the dock. Listen to the iPod/iPhone Note • Make sure that the iPod/iPhone is loaded correctly. Star t to play music from your iPod/iPhone. » Music streams from the docking speaker automatically. Charge the iPod/iPhone The docked iPod/iPhone begins to charge automatically after connected to AC power. Note • You cannot charge your iPod/iPhone when the docking speaker is powered on by batteries. Play from an external device With this docking speaker, you can also enjoy audio from an external device such as an MP3 player. Note • Make sure that no iPod/iPhone is docked in the speaker. 1 If no iPod/iPhone is docked, connect an MP3 link cable (3.5mm, not supplied) to: • the AUDIO IN socket at the back of the docking speaker. • the headphone socket on an external device. » The docking speaker switches to MP3 link mode automatically. 2 Play music on the device (see the device's user manual). 6 EN AUDIO IN AUDIO IN Adjust volume During play, press +/- repeatedly to increase or decrease the volume. EN 7 5 Product information Note • Product information is subject to change without prior notice. Specifications Amplifier Rated Output Power 2 x 5 W RMS Signal to Noise Ratio 85 dB General information AC/DC switching Model: OH- adapter 1018E1002000U (Philips) Input: 100-240 V~, 50/60 Hz, 650 mA; Output: 10 V 2 A Batteries 4 x AA batteries Operation Power 18 W Con...