Stimmen - 3, Durchschnittliche Bewertung: 3.3 ( )

Hersteller: LG Dateigröße: 1.91 mb Dateiname: Unterrichtssprache:

A6 Connecting the Display Using the Computer A B Connect D-sub(RGB Analog) Cable (PC) Connect D-sub(RGB Analog) Cable (Mac) NOTE This is a simplified representation of the rear view. This rear view represents a general model; your display may differ from the view as shown. 1. D-subX-PORT B A Wall-outlet type Analog signal Mac adapter (This item must be purchased separately.) For Apple Macintosh use, a separate plug adapter is needed to change the 15 pin high density (3 row) D-sub VGA connector on the supplied cable to a 15 pin 2 row connector. 2. Press button on the front switch panel to turn the power on. When monitor power is turned on, the 'Self Image Setting Function' is executed automatically. NOTE ‘ Self Image Setting Function’? This function provides the user with optimal display settings.When the user connects the monitor for the first time, this function automatically adjusts the display to optimal settings for individual input signals. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or tilted screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. A7 Connecting the Display Using the Monitor 1. Make sure to turn off the computer and product. Connect the cable as below sketch map form 1 to 2 . Connect peripheral devices Connect LAN Cable (X550 port) 1 2 D-subX-PORT Wall-outlet type Analog signal (Make sure to connect X550 port,not LAN port of PC) Up to 5 ports are supported per X550 PCI Card. Up to 5 ports can be connected if necessary. (This item must be purchased separately.) Keyboard/Mouse Input LAN cable should be connected before boo- ting PC.(This item must be purchased separately.) Headphone/Earphone Input Automatically mutes the speaker volume when the WX550 port headphones are plugged in. When you use the monitor speaker via the X-PORT, turn the PC volume up to the highest level and adjust the monitor volume. It is recommended to use a PS/2-type keyboard/mouse. To use the monitor keyboard/mouse properly, it must be connected to the PC. Applications that require other than 16 bit color quality and the set resolution are not supported. ‘AUTO/SET’ Function? When you encounter problems such as blurry screen, blurred letters, screen flicker or titled screen while using the device or after changing screen resolution, press the AUTO/SET function button to improve resolution. 2. Press button on the front switch panel to turn the power on. A8 Connecting the Display NOTE LAN Cable -For the LAN cable,it is recommended to use SFTP (recommend : 6m, max : 10 m) provided by LG. Image quality and some functionality may be degraded if a different LAN cable is used. -To achieve good image quality,avoid using UTP and STP cables. -You must use a direct LAN cable,not a crossover one. Both connections should be same colors. Do not connect any kind of network devices. Core The ferrite core can be used to reduce electromagnetic waves when connecting a LAN cable. As shown in the image below,fit the ferrite core to the LAN cable. The ferrite core needs to be separated from the mold by 5 centimeters. You can purchase SFTP (recommend : 6m, max : 10 m) LAN cables and cores through LG additionally. A9 Connecting the Display Connecting to a X550 port using a LAN cable. Notice Turning the power off while booting the PC may damage the product. Turning the power off while booting the PC may cause it to operate incorrectly. If the mouse is connected using a USB device and is not detected, disconnect and connect it again. If you reconnect a peripheral device such as a keyboard, mouse or LAN cable while the PC is in operation, the device may not work properly. Make sure that the power is turned off when disconnecting/connecting a peripheral device. Making both ends of LAN cable to across the coil two times before connect to network monitor and PC. PC spec : The host PC operating system can be Windows Server 2003 R2 SP2(Standard or Enterprise Edition, 32-bit). Notice -To achieve the best PC performance, up to six users are recommended for one PC. If there are seven or more users, performance may be degraded depending on the environment and the PC’s specifications. -Check if the PC supports Windows Server 2003 before purchasing it. A host PC should have the following specifications: 1. Minimum -CPU : Dual core processor at 3.0 GHz or higher (i.e. : Intel Core 2 Duo or AMD Athlon X2) -RAM : 2 GB of system memory or higher 2. Recommend -CPU : Quad core processor at 2.66 GHz or higher (i.e. Intel Core 2 Quad or AMD Phenom X4) -RAM : 4 GB of system memory 3. Internet access speed may be different depending on the network environment. Restrictions : Using this network monitor for the following purposes may cause screen disruption or slower PC operation. 1. Video / Moving picture 2. Games Color setting: Image quality may vary depending on the X550 card, so it is recommended to execute “White Balance” when using ...

Herunterladen

Geben Sie zwei Ziffern: