102547 Rev. A

Install the front frame utilizing the return flange mounting holes located on the left and right side of the frame. After the frame is in place, level, plumb and install the door. Check for correct latch alignment. Front View (OBAD36 shown) Front View (OBAD20 shown) Rear View Rear View (OBAD36 shown) (OBAD20 shown) SPECIFICATIONS MEASUREMENTS Overall Width OBAD20 - 19 1/2" (495mm) OBAD36 - 35 7/8" (911mm) Overall Height 21" (533mm) Overall Depth 1/4" (6mm) deep return on frame edge Cu

ALL DACOR APPLIANCES ARE DESIGNED AND CONSTRUCTED TO GIVE YOU MANY YEARS OF SAFE OPERATION. THE OPERATION WILL BE FURTHER ENHANCED IF PROPER CARE AND JUDGEMENT ARE EXERCISED IN THE USE AND MAINTENANCE OF THIS APPLIANCE. WARNINGS: Must be followed carefully to avoid personal injury or damage. NOTES: Contains helpful hints and tips. Place Serial Number Label Here Use & Care Outdoor Grill Please Read Before Using Your Outdoor Grill Part No. 65250 Rev. D 1 TABLE OF CONTENTS .........................

Interior Surfaces Exterior Surfaces IMPORTANT: 1. Turn the knobs to the “OFF” position prior to removing them from the valve stems. 2. The grill should never be operated without the knobs in place. 3. Do not soak the knobs in water or place them in the dishwasher. 4. Do not expose the knobs to direct flame, hot utensils or other sources of heat. 5. Do not use abrasive or corrosive cleaners or applicators, as these could cause permanent damage. NOTE: Cleaning stainless steel varies with each part

Without a proper preheat, these materials will collect on both the flame spreader and the burner tubes resulting in partial or total loss of ignition or a decrease in burner performance. Always light every burner to generate maximum heat output and to assure even heat distribution. Using only one or two burners can eventually result in a buildup of unwanted material and could affect performance. NOTE: In colder climates the infrared burner may have to be used in order to achieve the suggested pr