Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
ZOTAC RAIDbox
Selecting Access Modes
Available Access Modes
The ZOTAC RAIDbox supports four access modes:
• JBOD: Just a bunch of disks, each of which can be accessed directly as an
independent drive.
• BIG: Requires two mSATA SSDs installed. Data is spanned across both mSATA
drives and presented as a single disk. This mode enables mSATA SSDs of
mismatched sizes to function inside the ZOTAC RAIDbox and appear as one
large disk to the OS.
• RAID 0: Requires two mSATA SSDs installed. This mode writes data sequentially
across two disks (striped) for increased performance. If one drive fails, all data is
lost. ZOTAC recommends only installing two matching mSATA SSDs of the same
size and model.
• RAID 1: Requires two mSATA SSDs installed. This mode creates an exact copy
(mirror) of data and partition on two drives. Total size of the array can only be as
big as the smallest capacity drive. RAID 1 provides automatic data recovery if
one of the drives fails and replaced with a new drive. The new disk must be equal
or greater than the other disk for data recovery; otherwise data recovery is not
possible. ZOTAC recommends only installing two matching mSATA SSDs of the
same size and model.
8
...