Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
It is prohibited to use metal objects for snow layer removal. It is recommended to clean the freezing compartment after each defrosting, but at least twice a year. After Cleaning ww Warning Check that the power cord is not damaged, power plug has not overheated, and that the power plug is tightly inserted into the outlet. Be sure to dry the appliance with a cloth after washing it with water. Do not use abrasive, petroleum, benzene, thinner, hydrochloride acid, boiling water, rough brush, etc, as they may damage parts of the fridge-freezer. Exterior Clean the outside of the fridge-freezer with a soft cloth soaked with hot water or liquid detergent. If you use a detergent, be sure to wipe it with a clean wet cloth. 44 It is prohibited to scrape the surface of an freezing evaporator with metal and sharp objects for snow layer removal. ww Caution 44 It is prohibited to scrape the surface of an freezing evaporator with metal and sharp objects for snow layer removal. ww Caution Trouble Shooting Trouble Shooting Problem Fridge-Freezer does not operate Fridge or Freezer Compartment Temperature too warm Vibration or Rattling or Abnormal Noise Frost or Ice Crystals on frozen Food Moisture forms on Cabinet Surface Before calling for service, check this list. It may save you both time and expense. This list includes common occurrences that are not the result of defective workmanship or materials in this appliance. Possible Causes • Power plug may be unplugged from the electric outlet. Plug it in securely. • House fuse has blown or circuit breaker has tripped. Check and/or replace fuse and reset circuit breaker. • Power cut. Check house lights. • Temperature control not set on proper position. Refer to Temperature Control section. • Appliance is placed close to heat source. • Warm weather-frequent door openings. • Door left open for a long time. • Package holding door open or blocking air duct in freezer compartment. • The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be unstable. Make it even by rotating the leveling screw. • Unnecessary objects placed in the back side of the fridge-freezer. • Door may have been left ajar or package holding door open. • Too frequent or too long door openings. • Frost within package is normal. • This phenomenon is likely to occur in a wet space. Wipe it with a dry towel. 45 Trouble Shooting 46 Problem Possible Causes Moisture collects inside • Too frequent or too long door openings. • In humid weather, air carries moisture into fridge when doors are opened. Fridge has odor • Foods with strong odors should be tightly covered or wrapped. • Check for spoiled food. • Interior needs cleaning. Refer to CLEANING section Door not closing properly • Food package is keeping door open. Move packages that keep door from closing. • Fridge-freezer is not level. Adjust the leveling screws. • The floor on which the fridge-freezer is installed may be uneven or the fridge-freezer may be unstable. Slight...
Dieses Handbuch ist für folgende Modelle:Kühlen - GA-419BLCA (376.81 kb)
Kühlen - GA-449BLBA (376.81 kb)
Kühlen - GA-449BLCA (376.81 kb)
Kühlen - GA-449BLLA (376.81 kb)