Stimmen - 5, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
• If the failure occurs at product and it does not operate by pressing any button and normal indication is not done, do not turn the power off and immediately contact with the local service center. • A lot of time is needed for service engineer to detect the failed part by turning it off. Exterior Type 2 • Pressing this button stops operation of other buttons. • ”Locking” or “Un-Locking” is repeated whenever pressing the LOCK button. (For “Locking” or “Un- Locking” press the “LOCK” button for 3 secs.) • When ‘LOCK’ is activated, pressing the other buttons would not work. In selecting In selecting "Lock ON" "Lock OFF" Switching on and off the appliance Switch off • Press the ON/OFF button over 3 seconds to switch for defrosting, cleaning and no use of long term. • The outside lamp(display) is turned off. • The inside lamp is ON, When open the door. Switch on • Press the ON/OFF button over 3 seconds to switch the appliance. 37 Operation Door Alarm • When the door of the fridge is left opened for a while, the alarm sounds. Please contact with the local service center if warning continue to sound even after closing the door. Ice Making • Fill water in ice making box of the ice making corner. If water is fully filled the ice will not be separated well and water can be dropped to make ice lumped. • Ice will be dropped into the ice storage bin by rotating ice separation handle of ice making compartment. 38 Note • Rotating the ice separation handle before ice is fully frozen may cause the remaining water drop into the ice storage bin to lump the ice together. Defrosting • The refrigerator uses an automatic defrosting system. Frost, forming on the back wall of the compartment melts, when the Cyclically working compressor is switched off, and turns to water drops. Melt water runs down to the drain tray, gets to the container in the compressor through the tube. It is necessary (at least once in 3 months) clean the drain hole to ensure unobstructed drainage of melt water to the container. • To defrost and clean the freezing compartment, unplugging the refrigerator or selecting ‘On/Off’ switch and removing products from the freezing compartment. Open the door of the freezing compartment for 1 hour, collect melt water with a sponge and wash the compartment and rub it dry. It is prohibited to scrape the surface of an freezing evaporator with metal and sharp objects for snow layer removal. ww Caution Tip • To remove ice cubes easily, run water on the tray before twisting. 38 Note • Rotating the ice separation handle before ice is fully frozen may cause the remaining water drop into the ice storage bin to lump the ice together. Defrosting • The refrigerator uses an automatic defrosting system. Frost, forming on the back wall of the compartment melts, when the Cyclically working compressor is switched off, and turns to water drops. Melt water runs down to the drain tray, gets to the container in the compressor through the tube. It is necessary (at least once in 3 ...
Dieses Handbuch ist für folgende Modelle:Kühlen - GA-419BLCA (376.81 kb)
Kühlen - GA-449BLBA (376.81 kb)
Kühlen - GA-449BLCA (376.81 kb)
Kühlen - GA-449BLLA (376.81 kb)