Stimmen - 2, Durchschnittliche Bewertung: 3.5 ( )

Hersteller: AEG Dateigröße: 224.49 kb Dateiname: Unterrichtssprache:

To achieve sufficient ventilation follow the instructions relevant to installation. Safety precautions for isobutane Warning The refrigerant of the appliance is isobutane (R 600a) that is inflammable and explosive to a greater extent. Keep ventilation openings, in the appliance enclosure or in the built-in structure, clear of obstruction.omission Do not use mechanical devices or other means to accelerate the defrosting process, other than those recommended by the manufacturer. Do not damage the refrigerant circuit. Do not use electrical appliances inside the food storage compartments of the appliance, unless they are of the type recommended by the manufacturer. For the safety of life and property keep the precautions of these user's instructions as the manufacturer is not responsible for damages caused by omission. Installing the appliance Transportation, unpacking It is recommended to deliver the appliance in original packaging, in vertical position considering the protective warning on packaging. After each transportation the appliance must not be switched on for approx. 4 hours. Unpack the appliance and check if there are damages on it. Report possible damages immediately to the place where you bought it. In that case retain packaging. Cleaning Remove every adhesive tape and everything else, which ensure the accessories not to move in the appliance. Wash the inside of the appliance using lukewarm water and mild detergent. Use soft cloth. After cleaning wipe out the inside of the appliance. Placement The ambient temperature has an effect on the energy consumption and proper operation of the appliance. When placing, take into consideration that it is practical to operate the appliance between ambient temperature limits according to the climate class that is given in the chart below and can be found in the rating plate. Class of climate Ambient temperature SN +10…+32°C N +16…+32°C ST +18…+38°C If the ambient temperature goes below the lower data the temperature of the cooling compartment can go beyond the prescribed temperature. If the ambient temperature goes beyond the upper data this means longer operating time of the compressor, breakdown in the automatic defrosting increasing temperature in the cooling compartment or increasing energy consumption. In the bag of the accessories there are two spacers which must be fitted in the two top corners. Slacken the screws and insert the spacer under the screw head, then re-tighten the screws. When placing the appliance ensure that it stands level. This can be achieved by two adjustable feet at the bottom in front. Do not stand the appliance in a sunny place or close to a radiator or cooker. The refrigerator is designed to operate when it is totally pushed to the wall. When placing the refrigerator keep minimal distances recommended in figure. A: placing it under a wall-cupboard B: placing it freely Installation of the Carbon Filter On delivery the carbon filter is in a plastic bag to maintain it's dura...

Herunterladen

Geben Sie zwei Ziffern: