Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: AEG Dateigröße: 123.61 kb Dateiname: Unterrichtssprache:

A large quantity of warm food was placed in the appliance within the last 24 hours. The appliance is near a heat source. Light bulb is defective. Door seal is not air tight (possibly after reversing the door) . Appliance is not level. The appliance is touching the wall or other objects. This is normal, no error has occurred. Water drain hole is blocked. Remedy Please look in the "Initial Start Up" section. Open the door only as long as necessary. Turn the temperature regulator to a colder setting. Please look in the "Installation location" section. Please look in the "Changing the Light Bulb" section. Carefully warm the non sealing sections of the door seal with a hair dryer (not hotter than approx. 50 °C). At the same time shape the warmed door seal by hand such that it sits correctly. Readjust the feet. Move the appliance slightly. The compressor starts after a period of time. See the "Cleaning and Care" section. If after all these checks your appliance does correctly, contact your local AEG Service Force Centre. Please note that it will be necessary to proof of purchase for any in- guarantee service calls. In-guarantee customers should ensure that the above checks have been made as the engineer will make if the fault is not a mechanical electrical breakdown. Energy Saving Tips • Do not install the appliance near cookers, radiators or other sources of continuous warmth. High ambient temperatures cause longer, more frequent operation of the compressor. • Ensure sufficient air circulation at the appliance base and at the back wall of the appliance. Never cover air vent openings. • Do not place warm foods into the appliance. Allow warm foods to cool first. • Do not leave the door open any longer than necessary. • Do not set temperature any colder than necessary. • Put frozen food in the fridge to defrost. The cold in the frozen food will then be used to cool the fridge. Accumulation of dust on the condenser increases energy consumption. For this reason carefully clean the condenser at the back of the appliance once a year with a soft brush or a vacuum cleaner. Ensure the appliance is switched off. Something Not Working If the appliance is not functioning correctly, please carry out the following checks before contacting your local AEG Service Force Centre. Warning! Repairs should only be carried out by qualified service engineers. Repairs carried out by inexperienced persons may cause injury or serious malfunctioning. Symptom Possible Cause Remedy Appliance is not switched on Switch on the appliance. Mains plug is not plugged in or Insert mains plug. is loose. Appliance does not work. Fuse has blown or is defective. Check fuse, replace if necessary. Mains malfunctions are to be Socket is defective. corrected by an electrician. Turn the temperature regulator Appliance cools too Temperature is set too cold. to a warmer setting. Frozen food Symbols/Freezing Calendar • The symbols on the drawers show different types of frozen goods. • The numbers indicate storage times in months for the ...

Herunterladen

Geben Sie zwei Ziffern: