Login:
Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Anleitung Hamilton Beach, modell MealMaker Express 80200

Hersteller: Hamilton Beach
Dateigröße: 11.16 mb
Dateiname: 840052500.pdf
Unterrichtssprache:en
Link zum kostenlosen Download Hinweise finden Sie am Ende der Seite



Anleitung Zusammenfassung


Use handles or knobs. 3. To protect against risk of electrical shock, do not immerse appliance,?ord or plug in water or other liquid. ’ 4. Close supervision is necessary when this appliance is used near children. 5. Unplug from outlet when not in use and before cleaning. Allow to cool before putting on or taking off parts, and before cleaning the appliance. 6. Do not operate any appliance with a damaged cord or plug, or after the appliance malfunctions or is dropped or damaged in any manner. Call our toll-free customer service number for information on examination, electrical repair, mechanical repair, or adjustment. 7. The use of accessory attachments not recommended by Hamilton Beach/ Proctor-Silex, Inc. may cause injuries. 8. Do not use outdoors. 9. Do not let cord hang over edge of table or counter, or touch hot surfaces, including stove. 10. Do not place on or near a hot gas or electric burner, or in a heated oven. 11. Extreme caution must be used when moving an appliance containing hot oil or other hot liquids. 12. To disconnect, turn all controls to “OFF," then remove plug from wall outlet. 13. Do not use appliance for other than intended purpose. SAVE THESE INSTRUCTIONS! CONSUMER SAFETY INFORMATION This appliance is intended for household use only. This appliance is equipped with a grounded-type 3-wire cord (3-prong plug). This plug will only fit into an electrical outlet made for a 3-prong plug. This is a safety feature. If the plug should fail to fit, contact an electrician to replace the obsolete outlet. Do not attempt to defeat the safety purpose of the grounding pin, part of the 3-prong plug. To reduce risk of electrical shock, do not immerse the flatbread maker in water. To avoid an electrical circuit overload do not use another high wattage appliance on the same circuit with the flatbread maker. This appliance has a short cord to reduce the hazards of becoming entangled or tripping over a longer cord. An extension cord may be used if the electrical rating of the extension cord is equal to or greater than the rating of the flatbread maker. Use only an extension cord rated 10 amperes or greater. Care must be taken to arrange the extension cord so that it will not drape over the countertop or table top where it can be pulled on by children or tripped over. Always use hot mitts to protect hands when opening the flatbread maker. CAUTION: Escaping steam may cause burns. WARNING: To reduce risk of personal injury, allow unit to cool before lifting or moving. Do not lift or move while in operation. 2» Flatbrrad Hiker Safety 840052500 U&C v05 12/22/98 10:13 AM Page 3 (1,1) Contents Flatbread Maker Safety....................2 Parts and Features............................3 Operating Instructions....................4-5 Cleaning............................................6 Storing................................................6 History of Flatbread..........................7 Fusion Cooking..................................7 Flatbread Basics............................8-9 Tips for Success..........................10 Mixing the Dough by Hand............11 Convenience Dough........................12 The Fold, the Roll, the Wrap............13 Ethnic Foods, Ingredient Substitutions, and Package Sizes..................................14 Nutritional Information......................15 Troubleshooting................................16 Flatbread Recipes......................17-45 Filling Recipes..........................46-122 Customer Service..........................123 Pirts and Features 840052500 U&C v06 12/29/98 3:43 PM Page 4 (1,1) Before first use, wash the Cover and Bread Paddle in hot, soapy water. Rinse and dry. Use a hot, damp cloth to wipe the Griddle and both upper and lower surfaces of the Press. Select a flatbread and filling recipe to prepare. Plug unit into 120 volt AC outlet. Line up pin on Handle shaft with slot in upper plate. Insert Handle into Flatbread MealMaker Express. This is the unlocked position. The Handle will rotate freely if properly inserted. Push the Handle down, then rotate clockwise to lock onto the Latching Pin. Turn the Press Switch on to preheat. The Press Indicator Light will stay on constantly. The Bread Paddle should remain in the Press so it will preheat. Turn on the Griddle to preheat. Keep Cover on to preheat. As the Griddle heats and cools to maintain the set temperature, the Griddle Indicator Light will cycle on and off. |li The Press and Griddle should be preheated in about 10 minutes. ■ 0ptratin<| Instructions 840052500 U&C v06 12/29/98 3:43 PM Page 5 (1,1) L Unlock the Press, remove Bread Paddle, and place specified amount of dough onto the Bread Paddle. The dough should be positioned toward the rear of the press. Replace Bread Paddle into unit. The Bread Paddle handle will fit into slots on either the right or the left of the Latching Pin. (cont.) Open the Press and remove the Bread Paddle with the cooked...


Bewertungen



Bewerten
Vorname:
Geben Sie zwei Ziffern:
capcha





Kategorien