Stimmen - 0, Durchschnittliche Bewertung: 4 ( )

Hersteller: Hunter Fan Dateigröße: 344.32 kb Dateiname: 41282.pdf Unterrichtssprache:

ALWAYS place this Air Purifier on a firm, level surface. ALWAYS place the Air Purifier at least six (6) inches away from walls and heat sources such as stoves, radiators or heaters. This Air Purifier may not work properly on an uneven surface. 2. Place the Air Purifier in an area that is out of the reach of children. 3. Before using the Air Purifier, extend the cord and inspect for any signs of damage. DO NOT use the product if the cord has been damaged. 4. This product has a polarized plug (one blade is wider than the other) as a safety feature. This plug will fit into a polarized outlet only one way. If the plug does not fit fully into the outlet, reverse the plug. If it still does not fit, contact a qualified electrician. DO NOT attempt to defeat or override this safety feature. 5. ALWAYS UNPLUG the Air Purifier when it is not in operation, while the filter is being changed, and while it is being cleaned. 6. DO NOT tilt or move the Air Purifier while it is in operation. Shut off and unplug before moving. 7. DO NOT immerse the Air Purifier in water as permanent damage will occur. Refer to and follow the CLEANING AND FILTER REPLACEMENT instructions. Introduction Thank you for purchasing the HEPAtech™ Air Purification System from Hunter Fan Company. You have purchased the latest development in portable Air Purification Systems. This system has been developed to improve the quality of the air you breathe. Your HEPAtech™ Air Purification System outperforms other air purification systems by removing dust, smoke, and pollen particles as small as .1 microns in size. Room air is pulled in through the front grill and cleaned across the foam pre-filter and the HEPAtech™ system filter. Clean air is then released out the top grill in order to avoid stirring up settled particles. Models 30025, 30040 and 37025 include an Ionizer Using the ionizer improves the quality of air in the room. Negative ions are released into the air, and positively charged particles cling to the negative ions. These particles settle out of the air and can be vacuumed up during normal cleaning. These particles are also more easily trapped in the HEPAtech™ system filter as they pass through the HEPAtech™ Air Purification System. 41282-01 9-1-2001 2 ©2001 Hunter Fan Company 41282-01 9-1-2001 3 ©2001 Hunter Fan Company Using Your Air Purifier 1. Place your HEPAtech™ Air Purification System on a hard, flat surface. We recommend placing it on a table top in order to achieve the best air circulation for the room. 2. Before turning the Air Purifier “on”, YOU NEED TO OPEN THE FRONT COVER AND REMOVE THE PROTECTIVE PLASTIC THAT IS SURROUNDING THE HEPAtech™ SYSTEM FILTER. Press the buttons that are on each side of the front grill (See Figure 1). When they are pressed inward, you will be able to pull the front grill forward, opening the unit. Model 30010 Models 30025, 30040 and 37025 Figure 1 Air Purifier Parts Power Control - Choose Hi or Lo speed. The red light will be illuminated when the power is ‘ON’. Power Control - Choose Hi, Med, or Lo speed. The red light will be illuminated when the power is ‘ON’. Ionizer - Allows you to turn the ionizer ‘ON’. The green light will be illuminated when the ionizer is ‘ON’. RELEASE BUTTON (On each side) FILTER IONIZER POWER CONTROL WASHABLE PRE-FILTER FRONT GRILL COLOR CODED FILTER CHART RELEASE BUTTON (On each side) FILTER WASHABLE PRE-FILTER FRONT GRILL COLOR CODED FILTER CHART POWER CONTROL 3. The filter comes to you installed in the correct position. Grasp the filter, and pull it forward, up, and out of the unit. Remove the plastic wrapping and replace the filter in the unit. The white HEPAtech™ filter material should be facing outward (towards you). 4. Before closing the front cover, check the placement of the fo...

Herunterladen

Geben Sie zwei Ziffern: