Stimmen - 3, Durchschnittliche Bewertung: 4 ( )

Hersteller: Bryant Dateigröße: 336.94 kb Dateiname: pds912d.56.3b.pdf Unterrichtssprache:

Humid air is circulated throughout the home by the central heating system. All Bryant humidifiers are equipped with a humidistat to maintain the desired humidity level. Access to the media pad in the humidifier is convenient and tools are not required, allowing easy pad replacement. The fan-powered humidifiers, Model 913B and 913C, are designed for simple installation on supply ductwork, without a bypass duct required. Humidity is achieved by drawing heated supply air through a wet media pad, by means of the humidifier’s fan. The 913B offers high evaporation rate, up to 25 gallons of moisture per day. For smaller, tighter constructed, or well insulated homes, the 913C can deliver up to 16 gallons of moisture per day. The by-pass humidifiers, Model 912D and 912E, are designed for installation on the supply or return ductwork, by means of a bypass duct on a forced air heating system. Bypass humidifiers operate on the pressure differential between supply and return ductwork, bypassing heated supply air through the wet media pad, and back into the return air. The 912D offers up to 18 gallons of moisture per day with front bypass duct discharge. The 912E can deliver up to 17 gallons of moisture per day and has a reversible side bypass duct discharge. The humidifiers mentioned are constructed of high-impact, Noryl thermoplastic to provide years of durability. Mineral buildup is reduced by continual flushing with fresh water. The water valves are low-voltage DC solenoid valves, offering quiet operation. The voltage is then rectified to AC for installation. The Model 914A is rated up to 19 gallons of moisture per day and because of its no-drain construction, it is perfect for areas where hard water is not a problem. This Model is a bypass humidifier and is reversible for right or left duct runs. A rotating foam drum is operated by a synchronous motor and a float valve maintains the water level to keep the drum wet. An observation window allows for convenient visual maintenance checks. Form No. PDS 912D.56.3B SPECIFICATIONS MODEL 912E 912D 913B 913C 914A ARI CAPACITY* Gallons/Day @ 140° (Lbs/hr) 17 (5.9) 18(6.3) 25 (8.7) 16(5.9) 19(6.6) Gallons/Day @ 120° (Lbs/hr) 12.8 (4.4) 13.5(4.7) 18.8 (6.5) 12.8 (4.5) 14.3(5.0) TYPE Airflow Bypass | Fan Bypass Waterflow Drain Through No drain GENERAL Evaporator Pad-Replacement L2-02623-2 I L2-02623-1 | L2-02623-3 L2-02950-1 Material of Evap Pad Treated Expanded Aluminum Polyether Foam Size (H x W x D) of Evap Pad 10-7/8 x 10-7/16 x 1-3/4 14x10-5/8x1-3/4 9-3/4 x 9-1/4 x 1-1/4 9 Dia x 8-7/8 Pad Access Side (Right or Left) with Snap Latch Top and Bottom with Thumbscrew Side (Right or Left) and Front Access Front with 2 Pawl Latches Unit Size (H x W x D) 13-3/4 x 13-3/4 x 7-5/16 15-3/8 x 16-5/8 x 5-13/16 15-3/8 x 16-5/8 x 8-13/16 12.5x12x10.18 11-1/2 x 11-7/8X 11-7/8 Weight (Lb) 8 7.4 14 10 11.4 Water Usage (Gal/hr) 3.3 3.2 Float Controlled ELECTRICAL CONTROL I L...

Herunterladen

Geben Sie zwei Ziffern: