Stimmen - 4, Durchschnittliche Bewertung: 4.5 ( )

Hersteller: Pentair Dateigröße: 56.25 kb Dateiname: Unterrichtssprache:

CBU-10 155271-03 4. Teflon® Sleeve 163518 5. Quartz Sleeve 163509 6. O-rings for Quartz sleeve 163516 7. Plunger Rod w/retainer 163519 8. 3/4” blk cap w/o pr SPECIAL ORDER 9. Spacer Bushing 163517 10. Mounting bracket SPECIAL ORDER 11. UV Lamp 163508 12. Control Module (120v/60Hz) 163506 for use with UV-110-1 Control Module (220v/50Hz) 163507 for use with UV-110-2 13. SW-2 Wrench (not shown) 150295 UV-120 UVBB-120 REPLACEMENT PARTS Part Description: 1. 20” Housing 2. O-ring 3. Gasket for Insert Sleeve 4. Stainless Steel Insert Sleeve 5. Quartz Sleeve 6. O-rings for Quartz sleeve 7. Plunger Rod w/retainer 8. 3/4” blk cap w/o pr 9. Spacer Bushing 10. Mounting bracket 11. UV Lamp 12. Control Module (120v/60Hz) Control Module (220v/50Hz) 13. SW-2 Wrench (not shown) Part # 153013 143011 163515 163514 163513 163516 163519 SPECIAL ORDER 163517 SPECIAL ORDER 163512 163510 for use with UV-120-1 163511 for use with UV-120-2 150295 REPLACEMENT PARTS Part Description: 1. 20” BB Housing w/SS sleeve 2. O-ring 3. Quartz Sleeve 4. Plastic Holder w/O-rings 5. Teflon® tube 6. 1–1/2” blk cap w/o pr 7. Mounting bracket 8. UV Lamp 9. Control Module (120v/60Hz) Control Module (220v/50Hz) 10. SW-3 Wrench (not shown) 1 2 4 3 6 5 Part # SPECIAL ORDER 143273 163548 163543 163545 163541 SPECIAL ORDER 163512 163542 for use with UVBB-120-1 163547 for use with UVBB-120-2 150296 7 9 MAINTENANCE The quartz sleeve should be cleaned with warm soap and water every three months. UV bulb should be replaced every 9-12 months. The bulb does not normally burn out, however the efficiency of the bulb decreases after one year. Contact your local water treatment professional for replacement cartridge and bulb pricing or call 1-800-645-0267 for a dealer near you. Leaks… At inlet/outlet connections: • Use Teflon® tape. Between cap and housing: • Make sure that the O-ring is clean, lubricated and properly seated. • Hand-tighten the housing. • Check cartridge length. If cartridge is too long, replace with proper length cartridge. At UV quartz sleeve • Turn off all electrical power to the unit by unplugging or throwing the circuit. • Remove UV lamp and unscrew housing (See UV lamp replacement). • Check quartz sleeve for cracks, leaks and loose fittings. • Check that O-rings between quartz sleeve and cap are secure and have not been cut or damaged. • If the sleeve is broken replace with a new quartz sleeve and new O-rings. TECHNICAL SUPPORT Call our technical support staff to have any question answered: 1-800861- 8758. Outside of the United States, call (920) 457-9435. WARRANTY Pentek warrants to the original owner (under normal use): Ultra Violet Systems to be free from defects in material and/or workmanship one (1) year from the date of purchase. Any replacement products furnished will be free from defects in material and/or workmanship for the remainder of the original warranty period, or 30 days, whichever is longer. This warranty does not cover: (1) cartridges, UV bulbs, and accessories (2)...

Herunterladen

Geben Sie zwei Ziffern: