Stimmen - 4, Durchschnittliche Bewertung: 3.8 ( )

Hersteller: Vulcan-Hart Dateigröße: 3.35 mb Dateiname: Unterrichtssprache:

To open (allowing liquid or food product flow), slowly pull handle forward. With the valve handle pointing to the 6 o’clock position the valve is in a fully open position. This food draw-off valve system requires a 90 degree turn, right or left, to close off food flow. To allow for evenly mixed food products to flow into a food service pan, or stock pot, you should first stir the food product load in the kettle thoroughly before opening the food draw-off valve to allow the food to flow. Pans or pots may be placed on a portable dolly for easy movement and handling. CLEANING With kettle empty, pull valve handle to the 4 o’clock position. Pull tapered plug from valve body. SPECIAL NOTE: (Due to a pin that locks the valve plug into the valve body you can only remove or replace the valve plug when the valve handle is in the 4 o’clock position. VERY IMPORTANT — (Do not attempt to slide valve plug into valve body when valve handle is any other than 4 o’clock position. This will damage the pin and the plug will not seat properly causing leakage between the valve body and plug). Using warm soapy water wash the entire valve body and open area into the kettle interior. Also, wash the interior and exterior of the valve plug. Caution — Do not drop or hit the valve plug. This will nick or dent the soft dairy metal. Caution: Lubrication that must be done every day after use. After washing, lubricate the valve body and valve plug with Petro-Gel or a like and equally sanitary lubricant. Make sure all interior mating surfaces are covered with this lubrication before carefully sliding the valve plug into the valve body. Caution - Make sure the valve plug handle is in the 4 o’clock position when the plug is slipped carefully into the valve body. NOTE: A 4 oz. tube of Petro-Gel is furnished free of charge with your kettle. You car. reorder through your service agency or food service equipment dealer. There are no substitutes for this lubricant. If you are offered a substitute, make sure it is a like and equal product that is both sanitary food safe and will not break down when the kettle is brought to cooking temperature. CAUTION Each draw-off valve body and removable tapered draw-off plug is stamped with a set of corresponding numbers. After cleaning make sure the body and plug numbers match before reinserting the tapered plug. Always examine the valve plug and valve body for nicks and any heavy scratches. Do not attempt to push or force the valve plug into the valve body if there is any obstruction, nicks or heavy scratches in either the plug or body. To correct a badly leaking draw-off valve (leaking after lubricant applied), examine the tapered surface of each and carefully dress any raised placed with a very fine file or with emery cloth. Do not cut below the metal surface when removing any raised places. Coat plug lightly with lapping compound, insert plug in body and rotate to seat plug in body. Use a medium grade of lapping compound first and finish with a fine grade of lapping compound. Valve grinding compound from an automobile supply house is suitable for this. Clean surfaces thoroughly after use of lapping compound. Lubricate surfaces with non-toxic Petro-Gel to prevent the plug from sticking. WARNING If the food draw-off valve plug and inside of valve body are not lubricated, undesirable leakage can occur or (VERY IMPORTANT) when the kettle is up to cooking temperature and the operator attempts to open the draw-off valve, the valve plug could stick in a partially open position. NOTE: The food drawoff valve is bolted to the kettle so it can be easily removed from the empty kettle for complete inspection or if repair becomes necessary. 7 PARTS LIST PART ITEM NUMBERS AU ABOVE ITEMS APE INSIDE OF CONTROL HOUSING ALL ABOVE ITEMS ARE INSIDE OF FRONT PANEL 8 PARTS LIST ITEM NO. DESCRIPTION QTY. PART NO. 1 1 Vj" Faucet 1 836799-1 2M Faucet 836799-2 3" Faucet 836799-3 2 Gasket for 1 7j" faucet 1 831700 Gasket for 2” faucet 831713 Gasket for 3" faucet 833394 3 1 Vz" Faucet mounting screw, V?-20x1 '/< 2 SC-119-36 2" Faucet mounting screw V?-20x1 'U 2 SC-119-36 3" Faucet mounting screw, s/s-18x1 ’/« 4 SC-119-38 4 Cover hinge, left 1 817615 Cover hinge, right 1 817615-1 5 Cover handle 1 817168-4 6 Cover handle ball 1 817564 7 Nut, handle & hinge to cover-7i-20 S.S. Acorn 7 NS-025-04 8 Jam nut for above 7 NS-047-86 9 Cover hinge & stop rod—20'/2" O.D. kettle 2 817115-1 Cover hinge & stop rod—25” O.D. kettle 817115-2 Cover hinge & stop rod—29" O.D. kettle 817115-3 Cover hinge & stop rod—33" O.D. kettle 817115-4 Cover hinge & stop rod—36’/z" O.D. kettle 817115-5 10 Hinge rod acom nut, 'U"-20 4 NS-025-04 11 Lock washer for above 4 WL-006-17 19 Pressure relief valve 3/<" 1 833489 20 Air vent V 1 833239 21 Vacuum breaking check valve, 'h' 1 833238 22 Cross3/«" 1 FP-083-92 23 ZU" Close nipple 1 FP-054-27 24 'h" Close nipple 1 FP-054-08 25 3A" x V2" Reducing bushing ...

Herunterladen

Geben Sie zwei Ziffern: