Stimmen - 2, Durchschnittliche Bewertung: 4 ( )

Hersteller: Electrolux Dateigröße: 387.67 kb Dateiname: Unterrichtssprache:

The appliance is then switched off according to 5.5. A separate set of operating instructions contains information on the programming, analysing, logging and documenting of cooking processes using an external computer. 4.7 Altering the pan settings Altering the nominal values while working All the nominal values programmed in originally can be easily altered during the working process by setting the buttons for temperature (T), for the cooking time (D) and for the starting time (Z) to the new values. When the buttons are turned, the nominal value will appear flashing on the relevant display. If the nominal value is not altered for a few seconds, the display reverts to the actual value. Altering the cooking programmes while working Switching off the button (TT) will interrupt the heating/cooking process. Switching off the cooking time button (DT) reverts to continuous cooking. Switching off the starting time button (ZT) deletes the programmed-in starting time. The appliance can be started manually. 4.9 Switching off The appliance is shut down by turning the power isolator (H) (available as an option) as well as the control switch (S) to zero. All lights will go out when this is done. In the case of faults, the appliance must also be disconnected from all supply connections (mains supply, gas) 4.10 Power failure The loss of mains electricity while a cooking pan is being used can result in cooking being halted or interrupted. Cooking staff are then required to make an additional intervention in the controls or to monitor further processing. The measure to be imple- Power failure when: mented toftres£rt the ■ cooking process after the mains supply has been restored place°oking process is taking Press the key (TT) After the mains supply has The cooking process has been restored, the starting been programmed with a time comes to an end and the starting time although this has heating process starts autonot yet expired matically without any intervention in the controls 4.8 Tilting MECHANICAL TILTING The boiling pan is tilted with the help of an electric motor. It only works when the power isolator (H) (only available as an option) and the control switch (S) are switched on by turning from position 0 to I. Lamp (LS) will light up. Tilting at variable speed by turning the tilting knob (K): Emptying the pan turn to the right Tilting back turn to the left Turning the knob further will accelerate the tilting function. K Tilting knob Fig. 6 Left-hand console (at the top) Tilting is only to be activated with lid fully open and with the swivel outlet of the water mixing unit in the correct position (precisely towards the front) and where no object is present under the appliance in the tilting zone. The boiling pan is tilted down by turning tilting switch clockwise (to the right) and tilted up by turning it anticlockwise (to the left). Tilting at variable speed will only take place as long as the tilting switch (K) is held in the tilting position. On being released, the switch returns to the neutral, centre position and due to the drive selflocking, the boiling pan immediately comes to rest, whatever the position and filling level. The tilting motor is automatically switched o...

Herunterladen

Geben Sie zwei Ziffern: