Stimmen - 4, Durchschnittliche Bewertung: 4.3
(
)
)
|
Anleitung Zusammenfassung
(800) 334-3393 Service Parts ......................... (800) 538-2020 Warranty Department ............ (800) 531-2111 This manual must be used in conjunction with the Installation and Operation Manual for the water heater. -Do not store or use gasoline or other flammable vapors and liquids in the vicinity of the water heater or any other appliance. - What to do if you smell gas: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building. • Immediately call your gas supplier from a neighbor phone. Follow the gas supplier instructions. • If you cannot reach your gas supplier, call the fire department. -For your family comfort, safety and convenience, it is recommended this Setback Control be installed and serviced by a plumbing professional. INSTALLATION & OPERATION MANUAL With Troubleshooting Guide PLACE THESE INSTRUCTIONS ADJACENT TO WATER HEATER AND NOTIFY OWNER TO KEEP FOR FUTURE REFERENCE 238-47808-00A 7/09 Important Information CONGRATULATIONS! You have just purchased one of the finest water heater accessories on the market today! This Installation and Operation Manual will explain in detail how to install and operate your new Setback Control. We strongly recommend you contact a plumbing professional for the installation of this new control. We require that you carefully read this manual and the manual supplied with the water heater when questions arise. If you have any specific questions concerning your warranty, please consult the plumbing professional from whom your Setback Control was purchased. For your records, we recommend that you write the installation date for this control in the back of this manual. This manual should be kept with the Setback Control. Water Heater Setback Control: This Setback Control works with the water heater gas control. It has the capability to adjust the setpoint of the water heater during periods where little or no hot water is required for use. The Setback Control adjusts the setpoint of a water heater similarly to the way a programmable thermostat does for a furnace. Setback Control Features: • 7 day / 4 period programming • Conserves energy • Hot water capacity indicator (provides an estimate of available hot water) • Battery back-up stores programming during a power outage • Can be programmed to comply with Sabbath requirements • Similar interface to furnace / air conditioning thermostats • Precision control of water temperature -2 Important Information -3- The following terms are used throughout this manual to bring attention to the presence of hazards at various risk levels, or to important information concerning product life. READ CAREFULLY Indicates special instructions on installation, operation or maintenance, which are important but not related to personal injury hazards. NOTICE Indicates a potentially hazardous situation, which, if not avoided, could result in death, serious injury or substantial property damage. WARNING Indicates potentially hazardous situation, which, if not avoided, may result in moderate or minor injury or property damage. CAUTION Indicates an imminently hazardous situation, which, if not avoided, will result in death, serious injury or substantial property damage. DANGER NOTICE This water heater is equipped with an energy cut out device to prevent overheating. Should overheating occur or the gas supply fails to shut off, turn off the manual gas control valve to the water heater and call a qualified service technician. Whenever the water heater is filled with cold water, condensate will form on the cool tank surface and drops of water will fall on the hot burner and combustion chamber surfaces producing a “sizzling” noise. Condensation is normal and does not indicate a leak. It will disappear when the tank becomes heated. NOTICE The lower the temperature setting, the greater the energy efficiency, both to heat the water and to maintain the storage temperature during standby periods. Lower water temperatures also extend tank life. Remember, no water heating system will provide exact temperatures at all times. Allow a few days of operation at this setting to determine the correct temperature setting consistent with the requirements for the installation. DANGER Hotter water increases the risk of scald injury. Scalding may occur within five (5) seconds at a temperature setting of 140°F (60°C). To protect against hot water injury, install an ASSE approved mixing valve in the water system. This valve will reduce point of discharge temperature by mixing cold and hot water in branch water lines. A licensed plumbing professional or local plumbing authority should be consulted. Important Information -4- can cause severe burns are at highest risk of being Children, disabled and elderly instantly or death from scalds. Water temperature over 125°F Feel water before bathing or before setting temperature are available. showering. Temperature limiting valves Review this instruction manual at water h...