N.E. • Bellevue, WA 98005 (425) 455-0510 • FAX: (425) 455-0071 • (800) 692-0200 • - 84 - @ AIPHONE* Accessories Video Accessories Mounting boxes for Video Door Stations KAW-D r , „ tl 30 Degree Angle Box for Aiphone Video Door Stations • For use with Aiphone models: KA-DAR: Color Tilt camera KB-BAR: Color Tilt camera KC-DAR: Color Tilt camera MK-DAC: B & W PanTilt camera MK-DS: MK-Series fixed wide angle camera SPECIFICATIONS: Mounting: 1-gang box Material: ABS Plastic Color: Dark Charcoal

Audio/ Video and/or Audio-only Master or Door Stations connect directly to this unit via homerun CAT-5e wiring and RJ45 jacks. The AX-084C supports up to 4 Master Stations and up to 8 Door/Sub stations. The AX-084C can be expanded in increments of 32 for up to 104 Door/ Sub stations with the use of AX-320C add-on CEU’s. The CEU handles the calling and communication signals for the system, as well as providing selective door release outputs, video outputs, DVR trigger outputs, and CO line trans

|--MUDMIIIUV-1 .--, «y1«» ItKlnH.awWin*»!. U II H II U j ^ U a L** a tn m M ^ ^ IW ^ w l1* - H > ^ III ^ M> ^ 13» ^ iJ-| ^ I» ^ tri ^ LM H •— i ft» *01 cm« la lil m»i Kffl HhHH HhHH HhhH tl 3-n-.ES™ DESCRIPTION: The AX-248C is a Central Exchange Unit for the AX Integrated Audio & Video Security system. Audio/ Video and/or Audio-only Master or Door Stations connect directly to this unit via homerun CAT-5e wiring and RJ45 jacks. The AX-248C supports up to 8 Master Stations and up to 24 Door/

NE • Bellevue, WA 98005 (425) 455-0510 • FAX: (425) 455-0071 • (800) 692-0200 • MOUNTING & INSTALLATION: MK-1GD/MK-1HD MK-DH MK-2SD System Layout Example: MK-DV MK-1GD MK-1HD MK-2SD PS-1820UL 2 4 4 2 2 SPECIFICATIONS: Systems: MKS-1GD (MK-DH, MK-1GD, PS-1820UL) MKS-1GDV (MK-DV, MK-1GD, PS-1820UL) MKS-1GDVF (MK-DVF, MK-1GD, PS-1820UL) Power Source: 18V DC - Use PS-1820UL Operating Tempature: MK-DH, DV, DVF: 14° ~ 140° F MK-1GD/1HD/2SD: 32° ~ 104° F Communication: Hands free at door station, Hands

If you are assigned as a User, you can not add other users or change the passwords of other users. Click update for these changes to take effect. New Add a new user by typing in their name and password. You must retype the password to confirm it. Change password Change the password of an existing user by typing in their name and password. You must retype the password to confirm it. Remove users Removes the currently selected user. Using Hop Tables — A Hop Table is a listing of frequencies in a g

APPLYING AND STORING CHANGES — The following features can be selected from the Commands menu or you can click the appropriate button on the toolbar. These features write the information entered into temporary or permanent storage. See Fig. 12. NOTE: Settings must be applied before they can be stored. APPLY — This applies (transfers) changes from the all tabs into the attached transceiver's RAM (temporary memory). This is useful when changing and testing settings you are not sure you really want.

WHITE is Ground (to braid of coax). + + * V- = WHITE IMPORTANT!!! Power down all Aiphone equipment before performing any modifications! INSTALLATION INSTRUCTIONS: MY-2CD OR MYH-2CD: 1. Open monitor from the back by removing four small screws. 2. Locate the 2-pin male connection (CN5) near the base of the monitor. 3. Plug in 2-pin connector with black and white leads, and run wires out of the back of the unit, along with the Blue and Yellow wires (existing). 4. Connect the Black and W

Follow all local electrical codes during installation. All wiring must conform to local and national electrical codes. Improper wiring or installation may damage thermostat sensor. Recognize safety information. This is the safety-alert symbol . When you see this symbol on the equipment and in the instruction manual, be alert to the potential for personal injury. Understand the signal words DANGER, WARNING, and CAUTION. These words are used with the safety-alert symbol. DANGER identifies the most

. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Frequency Hopping. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Transmit Power Control. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 Security . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 PREINSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Site Evaluation Testing — Loopback Tes

Two additional interior stations may be door release activation. Additional door station added, either audio only (MK-2SD), audio/video (MK-1HD) features vary by model: The MK-DH is surface or one of each. The video door stations feature a wide angle mount and features a gray ABS plastic housing black & white CCD camera with built in infrared illumination and an adjustable viewing area. The MK-DV is for low light viewing, call-in button, and speaker/mic for surface mount and features a Zinc cast