Stimmen - 2, Durchschnittliche Bewertung: 4
(
)
)
|
Anleitung Zusammenfassung
(19) Monitor output jack Used for connecting the monitor for confirming images at camera installation. (20) SD memory card slot (21) SD memory card error LED This LED indicates the SD memory card error status. Functions Super Dynamic III (SUPER-D III) When there is wide variation between the illumination of light and dark areas of the location being monitored, the camera adjusts the lens iris in accordance with the bright areas. This causes loss of detail in dark areas. Conversely, adjusting lens brightness for the dark areas causes brighter areas to become washed out. SUPER-D III digitally combines an image that is set up for a clear view of bright areas with an image that is set up for a clear view of dark areas, creating a final image that preserves overall detail. Hard to see dark areas Hard to see bright areas Digital combination reproduces a clear view Motion Detector This function outputs an alarm signal when motion is detected in the monitoring area, such as the camera being covered with a cloth or its cover, or the camera's orientation being changed, during monitoring. Note ........................................................................................................................... • The motion detector function is not exclusively for preventing theft, fire, etc. The manufacturer assumes no responsibility for any accidents that occur or any losses incurred while this product is being used. ................................................................................................................................... Functions (continued) Progressive output Jagged edges that are unique to interlaced cameras and that occur in areas with movement are corrected by the motion adaptive interlace/progressive conversion function and converted to progressive images. This allows both still and moving objects to be captured as well-defined images. Privacy Zone Setting The privacy zone function allows you to mask specific areas, such as housing, of a monitored scene from view. Auto Back Focus Function Back focus can be automatically adjusted by operating the buttons on the camera, which makes installation easier. Back focus can also be adjusted on the PC after the camera is installed. When switching between color and black and white images, the back focus is automatically adjusted and focus deviation is corrected. Recording to an SD Memory Card Camera images can be saved to an SD memory card when an alarm occurs. Images can also be backed up when a network failure occurs. Note........................................................................................................................... • This operation has already been confirmed on the following SD memory cards: Panasonic SD memory cards (64 MB, 128 MB, 256 MB, 512 MB, 1 GB, 2 GB) SDHC memory card is not supported. ................................................................................................................................... Special Power Supply and Cable Installation Not Required (Power over Ethernet) Power can be supplied to the camera and images transmitted on a single LAN cable by connecting to PoE-compatible network devices. Special installation of a power supply for the camera and video cables is not required. Dual Encoding for Higher Efficiency Operation in Network Environments MPEG-4 and JPEG can be output at the same time. MPEG-4 operation when monitoring in real time or from a remote site, and JPEG operation when recording and verifying images at high quality can both be achieved at the same time in a network environment. Installation and Connections Installation Precautions The following describes how to install the camera. Before you install and connect the camera, check and prepare the required peripheral devices and cables. Before you connect the camera, turn off all devices to be connected, such as this camera and PC. Camera Installation Location Discuss the installation location for the camera with your retailer, and select a place that is strong enough for the installation. • Install the camera on a ceiling (concrete, etc.) at a location that is sufficiently strong to support it. • Install the camera body on the foundation section of the building or sections having sufficient bearing strength. This camera is for installation under eaves. • Do not install it in areas exposed to direct sunlight or rain. Never install or use the camera in the following locations. • Near a swimming pool or other areas where chemicals are used. • Food preparation areas and other locations where there are large amounts of steam vapor and oil, in flammable atmospheres, other special environments. • Areas where radiation, X-rays, strong electric waves, or magnetism is generated. • At sea, in coastal areas, or in areas where corrosive gas is being generated. • Areas outside of the allowable ambient operating temperature range (> page 47). • On a motor vehicle, a boat, or other areas subject to strong vibration. (This cam...