Stimmen - 4, Durchschnittliche Bewertung: 3.5
(
)
)
|
Anleitung Zusammenfassung
Delete unwanted cameras in advance. • Any recording currently being performed on the recorder will stop in the process of "CAM IP Auto Addressing". • The model WV-NS202 accepts "Manual Registration" only. Notes: • IP addresses will not automatically be assigned to cameras that are not applicable with this software ( ) and cameras registered with the host name ( ). • IP addresses can automatically be assigned to up to 32 cameras. Screenshot 2 The registration processing window will be displayed, and then the registration result will be displayed. Register the recorder and cameras, and confirmthe result (Manual Registration) Register the edited settings in the recorder and the camera. When not registered, the edited settings will not be applied to the recorder. Screenshot 1 Start operation when the search result is displayed on the main window. Step 1 Select the icon of the recorder to be registered. Step 2 Click the [Manual Registration] button. Step 3 Click the [OK] button when the confirmation window is displayed. Important: • To register the newly detected camera ( ) in the recorder, the camera icon should be the edited icon ( ). (page 16) • Any recording currently being performed on the recorder will stop in the process of "Manual Registration". Notes: • Edit of the settings of the cameras that are not applicable with this software ( ) and of the cameras registered with the host name ( ) is unavailable. • IP addresses can automatically be assigned to up to 32 cameras. Screenshot 2 The registration processing window will be displayed, Step 4 and then the registration result will be displayed. Confirm the registration result. Display live images from the camera and confirm that they are normally displayed. Notes: • Display live images from the camera and confirm that they are normally displayed. The live image transmission rate is set to "1 ips" on the recorder. The image compression method of the camera is set to "JPEG" or "M-JPEG". • The recording rate, camera title, and user name/password of the camera will return to the default when the already registered camera is registered again. It is necessary to configure them again. • The deleted camera icon will be displayed as the newly detected icon ( ) after registration. (Not registered in the recorder) Tips to configure the settings When having a problem to configure the settings with this software, check and try the solution described below. Reference pagesTipProblem Need to register the network settings of the newly detected camera without changing. The cameras with the same MAC address are displayed with the and icons. IP address is not displayed when registered after selecting "ON" for the DHCP function of the camera. No live image is displayed even though the camera icon is displayed. • Display the network settings of the camera and click the [Set] button without changing the settings. The newly detected icon will turn to the edited icon ( ) and the settings will be registered in the recorder. • The IP addresses of the camera registered in the recorder and in the camera are not the same. Configure as follows. q Delete a camera icon . w Click the [Set] button after selecting the camera icon to turn the icon to the edited icon . e Select the recorder icon and click the [Manual Registration] button. • It may take time for the camera to obtain the IP address. Wait for a while and display IP address by executing search. Registration of the camera (registration of IP address, etc.) in the recorder is necessary after displaying the IP address. • When the camera is already registered, the model number of the camera or the HTTP port number may be incorrect. When the user authentication of the camera is "ON", it is necessary to register the user name/password on the "Camera" page of the recorder. Check and edit the settings. Troubleshooting Contact your dealer if a problem cannot be solved even after checking and trying the solution or a problem is not described below. Reference pagesCause/solutionSymptom • Has 20 minutes passed after the default settings of the recorder such as IP address had been changed? The recorder can be detected only 20 minutes after changing the default settings. To detect the recorder after the settings have been changed, click the [Available] button of "IP Setup Tool" on the "NW Camera Setup" page (under the "Camera" page of the WJ-ND300 setup menu. The recorder can be detected only for 20 minutes. Setup Instructions (PDF) Setup Instructions (PDF) • Isn’t the host authentication function set to "ON"? Is the PC (host) in use to search allowed to edit the network settings of the recorder? When the host authentication is "ON", use a PC (host) that is allowed to edit the network settings of the recorder. • Is the Ethernet cable firmly connected to the 100BASE-Tx port? Confirm the cable is firmly connected. • Is the connection indicator of the 100BASE-Tx port lit? When it is not lit, connection to a LAN is not established or a network is n...