Stimmen - 0, Durchschnittliche Bewertung: 0
(
)
)
|
Anleitung Zusammenfassung
• Connections • Initial Setup • Clock Set •
• T
Before Using
•
Important Safeguards •
Connections / Initial Setup (Ready to Play)
Playback / Record on a Tape
Timer Recording
Location of Controls
imer Recording •
Important Safeguards and Precautions
Congratulations
Please make all cable or antenna connections before plugging into the AC
Head Cleaning
Playback a Tape
Record on a Tape
Timer Recording
Remote Control Buttons
FOR YOUR SAFETY, READ AND RETAIN
OUTDOOR ANTENNA INSTALLATION
on your new purchase! With proper use, this
outlet.
ALL SAFETY AND OPERATING
1
SAFE ANTENNA AND CABLE CONNECTION
dependable product will provide years of
Old or damaged tapes may clog heads.
Plugging the VCR Power Cord into an AC wall outlet starts auto channel and clock set.
1 Insert a tape.
If an outside antenna or cable system is connected to the
1 Insert a tape with a record tab (p. 3).
1 1) Press PROG*.
INSTRUCTIONS. HEED ALL WARNINGS IN
enjoyment. Please fill in the information below.
EJECT
LIGHT
equipment, be sure the antenna or cable system is grounded
Video Head Clog Sensor
• Loose or peeling labels
THE MANUAL AND ON THE UNIT
2) Press to display program screen.
so as to provide some protection against built up static
(Serial number is on tag on back of VCR.)
Connecting
(Ejects tape)
(Illuminates the remote)
Screen-right appears during
V I DEO HEADS MAY
may cause tape jam.
charges and voltage surges.
NEED CLEAN I NG
2 Press CH or NUMBER keys
INSTALLATION
Section 810 of the National
play if clogging is detected.
NEC
PLEASE I NSERT HEAD
- NATIONAL
POWER
• Date of Purchase
ELECTRICAL CODE
CLEAN I NG CASSETTE
TV (mode)
ANTENNA
to select the channel.
LEAD IN
2
Example
TIMER PROG. LIST
1) Set record DATE,
DATE
START
STOP
CH
1
POWER SOURCE CAUTION
Electrical Code, ANSI/NFPA
To remove screen, press
OR REFER TO MANUAL
(Turns VCR off/on)
WIRE
For ANT./Cable ➛ VCR ➛ TV
• For “LINE” input, see p. 9 of “Advanced
(Enables TV functions)
Operate only from a power source indicated on
GROUND
13 SAT --:-- --:-- --
press
to select:
Today
70 (in Canada, part 1 of the
• Dealer Purchased From
CLAMP
PLAY.
VCR
IN FROM ANT.
TODAY
the unit or in this manual. If necessary, have
END : PLAY
ANTENNA
2 Press PLAY to play tape.
Operations” book.
Canadian Electrical Code)
VCR (mode)
DISCHARGE UNIT
1 Connect cable from
TV
SLP
1~31= one time,
DSS/CABLE mode
your Electric Utility Service Company or Video
(NEC SECTION 810-20)
SELECT START DATE
provides information with
• Use “dry” type head
ELECTRIC
• Dealer Address
(Enables VCR functions)
SERVICE
• If tape has no rec. tab (p. 3), auto play begins.
8 9
31
1
2
6
Location of Contr
GROUNDING CONDUCTORS
• If recording from a channel over 100, first
(Enables DSS/CABLE functions)
EQUIPMENT
(NEC SECTION 810-21)
or DAILY= MON~ FRI,
Products Dealer verify the power source in your
respect to proper grounding
cleaning cassette only.
Antenna/Cable to VCR’s IN
SELECT :
SET:
GROUND CLAMPS
1 IN from
press 100 key then the other 2 digits.
END : PROG
home.
of the mast and supporting
• Dealer Phone No.
or WEEKLY= same time
SELECT / Selection Order
DAILY
(Part No. NV-TCL30PT is recommended.)
VCR/TV
POWER SERVICE GROUNDING
ANT./CABLE
7
2
POLARIZED OR GROUNDING PLUG
ELECTRODE SYSTEM
INPUT
(NEC ART 250, PART H)
FROM ANT. jack.
structure, grounding of the
Special Features During Play
Accessor
each week and press .
(For TV or VCR mode)
As a safety feature, this Video product comes
lead-in wire to an antenna discharge unit, size
• Model No.
PV-V462
• Follow cleaning tape instructions carefully.
WEEKLY
3 Press SPEED
WEEKLY
WEEKLY
(For LINE or channel)
with either a polarized power cord plug (one
of grounding conductors, location of antenna discharge unit,
Excessive use of tape can shorten head life.
2 Connect VCR’s OUT TO TV
OUT TO TV
Forward/Reverse Scene Search
2) Set remaining items,
(SAT)
(MON)
(SUN)
to select record speed (p. 3).
PLAY (Plays a tape)/
blade is wider than the other), or a three-wire
connection to grounding electrodes and requirements for the
• Serial No.
PROGRAM
grounding type plug.
grounding electrode.
➛ Press FF or REW.
press
to select and
jack to TV’s ANT. IN jack
2
FAST FORWARD/SEARCH
(Displays Timer Program screen)
POLARIZED PLUG CAUTION:
2
KEEP ANTENNA CLEAR OF HIGH VOLTAGE POWER
VHF/UHF
➛ Press PLAY to release.
press to set START/ STOP times, CH(channel) or
(Fast forwards tape/ forward
LINES OR CIRCUITS
with included RF Cable
4 Press REC
This plug will only fit into an outlet one way. If you
Accessories
After search has begun, each additional
LINE input (p. 9 of “Advanced Operations” book), and
visual search)
NUMBER Keys
cannot fully insert the plug, try reversing it. If it still
An outside antenna system should be located well away
Cleaning the VCR
ies • Head Cleaning • Loading Ba
to start recording.
accessory.
press of FF or REW changes speed as
REWIND/SEARCH
(Selects channel directly)
will not fit, have an electrician install the proper wall
from power lines, electric light or power circuits and where it
tape speed (p. 3).
• To edit, press PAUSE/SLOW to pause,
Remote Control
Batteries 2 “AA”
outlet. Do not defeat the safety feature by tampering
will never come into contact with these power sources if it
shown below.
(Rewinds tape/ reverse visual
Use soft, dry cloth or dusting attachment of a
and again to resume recording.
ADD/DELETE
with the plug.
should happen to fall. When installing an outside antenna,
LSSQ0342
Press PROG to end programming.
vacuum to remove dust from all cabinet vent
[SLP] : Approx. 21X
search)
(Adds or deletes a channel)
extreme care should be taken to avoid touching power lines,
For DSS/Cable Box
↔ Approx. 9X
ols (Remote Contr
GROUNDING PLUG CAUTION:
➛ VCR ➛ TV
circuits or other power sources as this could be fatal.
holes. You may moisten cloth with nonabrasive,
[LP]
: Approx. 9X ↔ Approx. 7X
STOP (Stops tape)
This plug will only fit into a three-hole grounding
Because of the hazards involved, antenna installation should
antistatic cleaner/ polisher.
1 Connect your cable box’s
Select Channel •
[SP] : Approx. 7X
outlet. If necessary, have an electrician install the
↔ Approx. 3X
5 Press STOP to stop recording.
3 TIMER PROG. L I ST
To Enter More Programs
DT START STOP CH SPD
DISPLAY
be left to a professional.
Remote keys
13 2 : 00 P 3 : 20P 02 SLP
TV
IN FROM ANT.
proper outlet. Do not defeat the safety feature by
Caution:
VCR
Cable TV
Press
to select and
-- -- : -- -- : -- -- --
OUT jack to the VCR’s IN
If at 21X, 9X, or 7X speed the picture is
(Displays VCR status)
Converter Box
PLAY, STOP, REW, and FF
-- -- : -- -- : -- -- --
tampering with the plug.
USING THE VIDEO UNIT
Alcohol and various solvents could damage
-- -- : -- -- : -- -- --
RF Coaxial
interrupted, change speed to 9X, 7X, or 3X.
press to set an unused program.
function as
3
POWER CORD
If the unit has been in storage or moved to a new location, refer
FROM ANT. jack with an RF
finish.
One Touch Recording
TAPE POSITION
CANCEL : ADD / DLT
Cable
Then repeat step 2.
Make sure power cords are routed so that they
first to the INSTALLATION section of these safeguards.
operation keys when menus
SELECT : SET :
(record in progress)
(Locates tape position)
are not likely to have anything rest on them, roll
1
KEEP THIS VIDEO UNIT AWAY FROM WATER OR
cable.
Notes
EXIT : PROG
VJAS0196
IN from
Or, press PROG to exit.
are displayed.
over them, or be in the way of walking traffic.
MOISTURE OF ANY KIND.
ANT./CABLE
Press REC repeatedly to set length as follows:
SEARCH/ ENTER
OUT TO TV
• Picture interruption may occur with some TVs.
If an extension cord is used, make sure it also
2
IF EQUIPMENT IS EXPOSED TO RAIN, MOISTURE, OR
2 Connect VCR’s OUT TO TV
1
30 min. ➛ 1 hr. ➛ 1:30 ➛ 2:00 ➛ 3:00
(Sets Search System /TV channel)
has either a polarized or grounded plug and that
• FF and REW search speed may vary
STRONG IMPACT, unplug the unit and have it inspected by
4 Press POWER off to set the timer recording. (“TIMER” lights on Multi Function Display.)
Specifications
➛ 4:00 ➛ exit.
the cords can be securely connected. Frayed
a qualified service technician before use.
jack to TV’s ANT. IN jack
depending on current tape position.
ACTION
VHF/UHF
2
cords, damaged plugs, and damaged or cracked
The VCR shuts off at the length set.
3
DURING AN ELECTRICAL STORM
Power Source:
120 V AC, 60 Hz
(Displays menu)
wire insulation are hazardous and should be
with included RF Cable
ol Buttons,
During a lightning storm, whether indoors or outdoors, or
Still (Freeze) Picture
replaced by a qualified service technician.
Power Consumption:Power On
Record one station, watch another
before leaving the unit unused for extended periods of time,
accessory.
Pla
COUNTER RESET
SPEED
Overloaded outlets and extension cords are fire
disconnect all equipment from the power source as well as
Approx. 23 W
➛ Press PAUSE/SLOW.
Press VCR/TV
Review, Replace, or Clear Program
Cancel a Timer Recording
hazards and should be avoided.
(Resets counter to zero)
(Changes tape speed)
the antenna and cable system.
Power Off
➛ Press PLAY to release.
(“VCR” goes out on Multi Function Display),
yback •
4
DO NOT BLOCK VENTILATION HOLES
4
WHEN THE UNIT IS PLUGGED IN
Approx. 3.0 W
(Recording is not in progress)
(Recording is in progress)
PAUSE/SLOW
COMMERCIAL SKIP/
Ventilation openings in the cabinet release heat
Initial Setup (Ready to Play)
➛ select channels on TV (recording continues).
• Never expose the unit to rain or water. DO NOT
Frame by Frame Picture
generated during operation. If they are blocked,
(Displays still, frame by frame,
ZERO SEARCH
OPERATE if liquid has been spilled into the unit.
Video Signal:
EIA Standard NTSC color
heat build-up inside the unit can cause failures
or slow motion picture)
(Starts Commercial Skip/
Immediately unplug the unit, and have it inspected by a
Video Recording
4 rotary heads helical
➛ Press PAUSE/SLOW in Still mode.
Select channels on VCR (in STOP or
a 1) Press PROG.
Press POWER and then STOP within 10
that may result in a fire hazard or heat damage
To order accessories, call toll free
tter
service technician. Fire and shock hazards can result from
System:
scanning system
1 Turn TV on and tune to channel 3.
3 Settings are made automatically.
Zero Search)
Fr
PAUSE mode)
to cassettes. For protection, follow these rules:
➛ Press PLAY to release.
2) Press to select LIST.
seconds to cancel the Timer Recording.
electrical shorts caused by liquid contact inside.
SAP/Hi-Fi
1-800-332-5368.
Audio Track:
1 track (Normal)
When setup is done, this screen
Press VCR/TV
a. Never cover ventilation slots or the unit while
Record • A
• Never drop or push any object through openings in the
(The TIMER indicator goes out on Multi
(Selects audio mode for play
RECORD
ont
in use, or operate the unit when placed on a
2 channel
ies • Pr
unit. Some internal parts carry hazardous voltages and
2 Plug VCR Power Cord into AC wall
appears.
Slow Motion Picture
(“VCR” lights up on Multi Function Display),
TIMER PROG. L I ST
Press
to select
or record)
(Records a program, etc.)
bed, sofa, rug, or other soft surface.
Loading the Batteries
Hi-Fi Audio Sound
b DT START STOP CH SPD
contact can cause electric shock or fire hazard.
outlet. VCR comes on and auto
➛ Hold down PAUSE/SLOW in Still mode.
➛ select channels on VCR.
7 9 : 00A 12 : 00A 08 SP
desired program.
Function Display.)
b. Avoid built-in installation, such as a book
VCR CLOCK CHANNEL
8 10 : 00P 12 : 00P 02 SP
• Avoid placing the unit directly above or below your TV set
Tuner:
CHANNEL UP/DOWN
V
10 8 : 00P 9 : 00P 10 SP
case or rack, unless proper ventilation is
channel and clock set starts.
as this may cause electrical interference. Keep all
➛ Press PLAY to release.
Broadcast Channels: VHF 2 ~ 13, UHF 14 ~ 69
9 /29 / 20 0 2 SUN 2 : 20PM
SU 9 : 00P 10 : 00P L1 LP
VOLUME UP/DOWN
TRACKING/ V-LOCK
i
provided.
Notes
magnets away from electronic equipment.
e
DST : ON
CANCEL : ADD / DLT
CABLE Channels:
Midband A ~ I (14 ~ 22)
• If screen below does not appear, check
(Adjusts TV volume)
(Selects channel/ reduces
w
5
AVOID EXTREMELY HOT LOCATIONS OR
5
USING ACCESSORIES
e
SETT I NG : CH 10
Notes
SELECT : SET :
SUDDEN TEMPERATURE CHANGES
Superband J ~ W (23 ~ 36)
v
• Watching one channel and recording
EXIT : PROG
VCR - TV connection and, if TV is
picture noise during Play and
of the
Use only accessories recommended by the manufacturer to
Do not place the unit over or near any kind of
ent
AUTO CLOCK SET
Hyperband AA ~ EEE
• These features work best in SP or SLP mode.
another is not possible when using Cable
avoid risk of fire, shock, or other hazards.
Slow mode)
COMPLETED
uto
tuned to channel 3, try switching it to
heater or radiator, in direct sunlight, inside a
(37 ~ 64)
• The sound will be muted.
Box or DSS Receiver.
6
CLEANING THE UNIT
closed vehicle, etc.. Do not move the unit
channel 4.
c To Replace program...
Light Tower Universal Remote Control
Unplug the unit. Then, use a clean, dry, chemically
Lowband A-5 ~ A-1 (95 ~ 99)
T
• To reduce picture noise, see “Manual
• After 5 minutes in Pause mode, VCR stops
suddenly between areas of extreme temperature
Opera
TIMER PROG. LIST
1) Press to display.
untreated cloth to gently remove dust or debris. DO NOT
Special CABLE channel 5A
a
• To change VCR’s output channel,
Tracking Control” on p. 3.
LIGHT button:
When pressed, available buttons light and selected mode button (TV, VCR, or
DATE
START
STOP
variation. If the unit is suddenly moved from a
to protect the tape and the video heads.
CH
If “AUTO CLOCK SET IS INCOMPLETE”
USE cleaning fluids, aerosols, or forced air that could over-
pe Erasur
VCR)
cold place to a warm place, moisture may
(01)
please refer to “VCR’s Output Channel”
7 SUN 9:00A 12:00A 08
• After VCR is in Still or Slow mode 3 minutes, it
2) Repeat Step 2
DSS CABLE) flashes 5 seconds. If no button is pressed, light goes out in 5
spray, or seep into the unit and cause electrical shock. Any
appears, manually set clock.
TODAY
condense in the unit and on the tape.
Ultraband 65 ~ 94, 100 ~ 125
seconds. Also, hold down a button to confirm the selected mode (mode button
substance such as wax, adhesive tape, etc. may mar the
in Advanced Operations book (p. 12).
auto switches to Stop mode to protect the tape
SP
(above) to set new
SELECT START DATE
6
TO AVOID PERSONAL INJURY
Operating
See below.
flashes) in the dark.
cabinet surface. Exposure to greasy, humid, or dusty areas
and the video heads.
• Do not place unsecured
tion
programs.
Temperature:
5 °C ~ 40 °C (41 °F ~ 104 °F)
SELECT :
SET:
may adversely affect internal parts.
EJECT button: Press to eject tape. EJECT is not available during recording.
VCR CLOCK CHANNEL
END : PROG
equipment on a sloping
Operating Humidity: 10 % ~ 75 %
surface.
SERVICE
AUTO CLOCK SET IS
• Do not place this unit on any
1
DO NOT SERVICE THIS PRODUCT YOURSELF
Weight:
2.7 kg (6.0 lbs).
INCOMPLETE
3 Press STOP to stop tape.
or
support that is not firm, level,
If, after carefully following the detailed operating instructions,
e • Specif
Dimensions:
430 (W) x 98 (H) x 242 (D) mm
PLEASE SET CLOCK BY
and adequately strong. The
this Video product does not operate properly, do not attempt
Press REW or FF in Stop mode to
PRESSING ACTION KEY
To Clear program...
16-15/16” (W) x 3-7/8” (H) x
unit could fall causing serious
to open or remove covers, or make any adjustments not
9-9/16” (D) inch
Rewind or Fast Forward tape.
injury to a child or adult and
TIMER PROG. L I ST
described in the manual. Unplug the unit and contact a
Press ADD/DLT.
DT START STOP CH SPD
damage to the unit.
qualified service technician.
Battery replacement caution
Press EJECT on remote,
-- -- : -- -- : -- -- --
Front View of the VCR
• An appliance and cart combination should be
Note: Designs and specifications are subject
8 10 : 00P 12 : 00P 02 SP
2
IF REPLACEMENT PARTS ARE REQUIRED
• Do not mix old and new batteries.
or STOP/EJECT on VCR to eject tape.
10 8 : 00P 9 : 00P 10 SP
moved with care. Quick stops, excessive force,
to change without notice.
SU 9 : 00P 10 : 00P L1 LP
Make sure the service technician uses only parts specified
and uneven surfaces may cause the appliance
• Do not mix alkaline with manganese batteries.
by the manufacturer, or those having the same safety
ications • Record/Playb
Plugging the AC Power Plug into an AC outlet
This video recorder, equipped with
CANCEL : ADD / DLT
and cart combination to overturn.
SELECT : SET :
characteristics as the original parts. The use of unauthorized
Manual Clock Set
Cassette Compartment
STOP/EJECT
• Carefully follow all operating instructions and
Prevent Accidental Tape Erasure
HQ (High Quality) system, is
EXIT : PROG
substitutes may result in fire, electric shock, or other
use the manufacturer's recommended
hazards.
compatible with existing VHS
accessories when operating this unit or
If Auto Clock Set was incomplete.
3
HAVE THE SERVICE TECHNICIAN PERFORM A SAFETY
PLAY
Break off the tab to
To record again
Features for a Quality Picture
VCR CLOCK CHANNEL
connecting it to any other equipment.
equipment. Only use tapes with the
d Press PROG to end the programming.
CHECK
prevent recording.
POWER
After any service or repairs to the unit, request the service
1 Press ACTION* on remote to display
mark. Only tapes tested and
Digital Auto Picture
technician to conduct a thorough safety check as described
Automatically controls the video output signal for
CLOCK menu.
inspected for use in 2, 4, 6, and 8
in the manufacture’s service literature to ensure that the
FAST
video unit is in safe operating condition.
less noise depending on the tape condition.
hour machines are recommended.
CH AUTO SET PROCEEDING
VCR CLOCK CHANNEL
Safety Precautions
FORWARD/
Video
Digital Auto Tracking
CANCEL : STOP
Warning: To prevent fire or shock hazard, do not expose this equipment to rain or
1 / /
:
SEARCH
Notes
Input
Continuously analyzes the signal and adjusts for
DST:ON
Auto Operation Functions
moisture.
Connector
CAUTION: To prevent electric shock, match wide blade of plug to wide slot, fully insert.
optimum picture quality.
SELECT MONTH
Cover the hole
• If you are using a Cable Box, VCR Timer Programming Channel (Step 2 above) must
Record Tab
Auto Play
Avertissement: Afin de prévenir tout risque d’incendie ou de chocs électriques, ne pas
REWIND/
with cellophane
Manual Tracking Control
VCR CLOCK CHANNEL
SELECT : SET :
be set to the Cable Box output channel and your Cable Box must be manually set to
EXIT : ACT I ON
exposer cet appareil à la pluie ou à une humidité excessive.
Insert a tape
tape.
(to reduce picture noise)
➛ Power comes on ➛ Play starts if there is no record tab (see p. 3).
the desired channel. The Cable Box must be left on.
Audio Input
SEARCH
Screw driver
ack T
Attention: Pour éviter les chocs électriques, introduire la lame la plus large de la fiche
AUTO CLOCK SET
Connector
CHANNEL UP/DOWN
Remote
RECORD
Use during Playback and Slow Motion mode to
Auto Rewind
• If a power interruption occurs while programming the timer, the timer program(s) may be
dans la borne correspondante de la prise et pousser jusqu’au fond.
2 Press to select the month and
reduce picture noise.
PROCEEDING
(L/R)
TRACKING/ V-LOCK
Sensor
Record/Playback Time
Play
canceled. If “TIMER PROGRAMS WERE LOST DUE TO POWER INTERRUPTION” appears
to set. In the same manner, select and
Press CH (TRACKING) / on the remote
➛ Tape end ➛ Rewind
on-screen, please re-enter the timer programs.
This symbol warns the user that uninsulated
ime
Fast Forward
set the date, year, time, and DST
control or on the VCR until the picture clears up.
CAUTION
voltage within the unit may have sufficient
Only use tapes with the
mark in this unit.
CANCEL : STOP
To return to Auto Tracking, press POWER off,
(Daylight Saving Time).
Play Auto Eject
RISK OF ELECTRIC SHOCK
magnitude to cause electric shock. Therefore,
DO NOT OPEN
Type of Video Cassette
then on again a few seconds later.
(Repeat Play must be off)
it is dangerous to make any kind of contact
Tape Speed
If you use a cable box, turn it on and set it
VCR CLOCK CHANNEL
Important notes when using DSS receiver
with any inside part of this unit.
Play
Setting
➛ Tape end ➛ Rewind ➛ Tape ejects if there is no record tab
T60
T120
T160
to the Public Broadcasting Station (PBS)
• When recording programs via DSS receiver, DSS receiver must be left on.
9 /29 / 20 0 2 SUN 2 : 20PM
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK,
This symbol alerts the user that important
SP
channel in your time zone. If you use a
2 Hours
DST:ON
• When recording programs via an antenna or cable, DSS receiver must be turned off.
DO NOT REMOVE COVER (OR BACK)
literature concerning the operation and
(Standard Play) 1 Hour
2 Hours 40 Minutes
R
R
DSS receiver, it must be turned off.
maintenance of this unit has been included.
SET COMPLETED
NO USER-SERVICEABLE PARTS INSIDE
R
R
R
R
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL
Therefore, it should be read carefully in order
R
R
SET
:
LP
5 Hours
to avoid any problems.
START
2 Hours 4 Hours
: ACT I ON
*Important: If a remote control button does not work when pressed,
*Important: If a remote control button does not work when pressed,
(Long Play)
20 Minutes
WARNING
V-Lock Control (to reduce picture jitter)
press the VCR button on the remote and try the button again.
press the VCR button on the remote and try the button again.
SLP
Over tightening “Nut type” RF coaxial cables
In Still mode, CH (TRACKING) / operate as a
3 Press ACTION to start clock and exit.
FCC Warning: Any unauthorized changes or modifications to this equipment would void the
3 Hours 6 Hours
8 Hours
(Super Long Play)
may damage jacks. Finger tighten only.
V-Lock control.
user’s authority to operate.
- 2 -
- 3 -
- 4 -
- 5 -
- 6 -
- 7 -
PV-V462 Basic-2 (02-5-14) 2nd.p65
3
2002/05/14, 10:28
LSQT0576B(Basic Operations) - Back
...